542397
46
Zoom out
Zoom in
Previous page
1/68
Next page
46
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level Š.
All the hotplates have this function.
To activate
The hob must be switched on, but no hotplate should be
working.
1.Select a hotplate.
2.Press the symbol.
The indicator lights up
The function has been turned on.
Note: If any hotplate is switched on when the Powerboost
function is working, and Š will flash on the hotplate display;
the power level Š will then be set. The Powerboost function will
be deactivated.
To deactivate
1.Select a hotplate.
2.Press the symbol.
The indicator will no longer appear and the hotplate will
return to the power level Š.
The function will be deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time program function
This function may be used in two different ways:
to automatically switch off a hotplate
as a timer
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Program the cooking time.
The hob must be switched on:
1.Select the desired hotplate and power level.
2.Press the 3 symbol. The Ú indicator on the hotplate lights
up. ‹‹ is displayed on the time program function display.
3.Press the + or - symbol. The basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.
4.Press the + or - symbol until the required cooking time
appears.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Selecting the hotplate . Press the 3 symbol and change the
cooking time with the + or - symbols, or set to ‹‹.
Once the time has elapsed
The hotplate switches off. A beep sounds and in the time
program function display ‹‹ appears for 10 seconds.
The Ú indicator on the hotplate lights up. Pressing the 3
symbol turns off the indicators and stops the beeping.
Notes
If cooking times have been programmed for various
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1.The timer can be selected in two different ways:
If you have selected the hotplate: press the 3 symbol
twice.
If you have not selected the hotplate: press the 3 symbol.
The Ú indicator next to the W symbol lights up. ‹‹ is
displayed on the time program function display.
2.Press the + or - symbol. The basic setting appears.
+ symbol: 10 minutes.
- symbol: 5 minutes.
3.Set the desired time using the + or - symbols.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the 3 symbol various times until the Ú indicator next to
the W symbol lights up. Change the time or set to ‹‹ with
the + or - symbols.
Once the time has elapsed
A warning signal sounds. ‹‹ is displayed on the time program
function display. After 10 seconds the indicators turn off.
Pressing the 3 symbol turns off the indicators and stops the
beeping.
 
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CA431230N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CA431230N in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Constructa CA431230N

Constructa CA431230N User Manual - Italian - 20 pages

Constructa CA431230N User Manual - Polish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info