Manual Constructa CA328353 (page 33 of 56) (English, German, Dutch, French)

755336

Zoom out

Zoom in

1/56

Operating the appliance en

Residual heat indicator

The hob has a two-stage residual heat indicator for

each hotplate.

If • appears in the display the hob is still hot. It may be

used, for example, to keep a small meal warm or to

melt cooking chocolate. As the hotplate cools down

further, the display changes to œ. The display remains lit

until the hotplate has cooled sufficiently.

1Operating the appliance

Oper at i ng the appl i anc e

In this section, you can find out how to set the

hotplates. The table shows heat settings and cooking

times for various meals.

Switching the hob on and off

The main switch is used to switch the hob on and off.

Switching on

Touch the symbol #. An audible signal sounds. The

indicator light above the main switch and the ‹

indicators light up. The cooktop is ready to use.

Switching off

Touch the symbol # until the indicator light above the

main switch and the indicators go out. All hotplates are

switched off. The residual heat indicator remains on

until the hotplates have cooled down sufficiently.

Notes

■The hob will switch itself off automatically once all

hotplates have been switched off for a while (10-

60 seconds).

■The settings remain stored for 4 seconds after the

cooktop has been switched off. If you switch it on

again during this time, the cooktop will operate using

the previously stored settings.

Setting a hotplate

Use the + and - symbols to set the desired heat setting.

Heat setting 1 = lowest setting

Heat setting 9 = highest setting

There is an intermediate setting between each heat

setting. This is identified by a dot.

Setting the heat setting

The hob must be switched on.

1. Touch the Q symbol to select the hotplate. ‹ lights

up in the heat setting display, ¬ lights up under the

heat setting display.

2. Touch the+ or - symbol within the next 10 seconds.

The basic setting appears.

+ symbol: Heat setting 9

- symbol: Heat setting 4

3. To change the heat setting: Touch the + or - symbol

until the desired heat setting appears.

Switching off the hotplate

There are 2 ways to switch off the hotplate:

■Briefly touch the Q symbol on the hotplate 2x one

after the other. ‹ appears in the heat setting display.

After about 10 seconds, the residual heat display

appears.

■Use the Q symbol to select the hotplate. Touch the

+ or - symbol until ‹ appears. After about 10

seconds, the residual heat display appears.

Note: The last selected hotplate remains activated. You

can set the hotplate without selecting it again.

Table of cooking times

The following table provides some examples.

Cooking times and heat settings may vary depending

on the type of food, its weight and quality. Deviations

are therefore possible.

For bringing liquids to the boil, use heat setting 9.

Stir thick liquids occasionally.

Food that needs to be seared quickly or food which

loses a lot of liquid during initial frying is best seared in

several small portions.

Tips for energy-saving cooking can be found in the

Environmental protection section.~ Page 31

Ongoing

cooking set-

ting

Ongoing cook-

ing time in min-

utes

Melting

Chocolate coating 1-1. -

Butter, honey, gelatine 1-2 -

Heating and keeping warm

Stew (e.g. lentil stew) 1-2 -

Milk** 1.-2. -

Heating sausages in water** 3-4 -

Defrosting and heating

Frozen spinach 2.-3. 10-20 min

Frozen goulash 2.-3. 20-30 min

* Ongoing cooking without a lid

** Without lid

*** Turn frequently

 

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CA328353 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa CA328353 Manual

Product: