596520
32
Zoom out
Zoom in
Previous page
1/52
Next page
32
Childproof lock
You can use the childproof lock to prevent children from
switching on the hotplates.
Switching the childproof lock on and off
The hob must be switched off.
To switch on: touch the " symbol for approx. 4 seconds. The
indicator light above the " symbol lights up for 10 seconds. The
hob is locked.
To switch off: touch the " symbol for approx. 4 seconds. The
lock is released.
Automatic childproof lock
This function automatically activates the childproof lock every
time you switch the hob off.
Switching on and off
You can find out how to switch the automatic childproof lock on
and off in the Basic settings section.
Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating. and the /œ residual heat
indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Control panel pause
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the " symbol. A signal sounds. The
indicator light above the " symbol lights up. The control panel
is locked for 30 seconds. You can now wipe over the control
panel without altering any settings.
Note: The main switch is excluded from the control panel
pause function. You can switch off the hob at any time.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
Display Function
™‚ Automatic childproof lock
Switched off.*
Switched on.
™ƒ Audible signal
Confirmation signal and operation error signal are switched off.
Only the operation error signal is switched on.
ƒ Only the confirmation signal is switched on.
Confirmation signal and operation error signal switched on.*
™ˆ Activation of the filament circuits
Switched off.
Switched on.
ƒ Last setting before the hotplate was switched off.*
™Š Time for selecting the hotplate
Unlimited: The last selected hotplate can always be adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
be able to adjust it.
™‹ Reset to basic setting
Switched off.*
Switched on.
* Basic setting
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CA328352 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CA328352 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info