714945
31
Zoom out
Zoom in
Previous page
1/48
Next page
Basic settings en
31
QBasic settings
Ba s i c set t i ngs
Your appliance has various basic settings. You can
adjust these settings to meet your own needs.
Changing the basic settings
The hob must be switched off.
1. Switch on the hob.
2. Within the next 10 seconds, touch and hold the
symbol for 4 seconds
and flash alternately in the lower display and
lights up in the upper display.
3. Touch the symbol repeatedly until the desired
setting appears in the lower display.
4. Touch the + or - symbol repeatedly until the desired
setting appears in the upper display.
5. Touch the symbol for 4 seconds.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the
main switch and make new settings.
DCleaning
Cl eani ng
Suitable maintenance and cleaning products can be
purchased from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills
from burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass
ceramic. Follow the cleaning instructions on the
packaging.
Never use:
Undiluted washing-up liquid
Detergent intended for dishwashers
Scouring agents
Harsh cleaning agents such as oven spray or stain
remover
Abrasive sponges
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass
scraper, available from retailers. Please note the
manufacturer's instructions.
You can also obtain a suitable glass scraper from our
after-sales service or from the e-Shop.
Using special sponges to clean glass ceramic achieves
great cleaning results.
Hob surround
To prevent damage to the hob surround, observe the
following instructions:
Use only hot soapy water.
Wash new sponge cloths thoroughly before use.
Do not use any sharp or abrasive agents.
Do not use the glass scraper.
Display Function
™‚
Automatic child safety lock
Switched off.*
Switched on.
ƒ
Manual and automatic child safety lock switched off.
™ƒ
Beeping sound
Confirmation signal and operation error signal are
switched off (primary switch signal always remains).
Only the operation error signal is switched on.
ƒ
Only the confirmation signal is switched on.
Confirmation signal and operation error signal switched
on.*
™ˆ
Activating the heating elements
Switched off.
Switched on.
ƒ
Last setting before the hotplate was switched off.*
™Š
Time for selecting the hotplate
Unlimited: the last selected hotplate can always be
adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust
it, after which you will have to select it again in order to be
able to adjust it.
™‹
Reset the basic settings
Switched off.*
Switched on.
*Basic setting
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa CA323255 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa CA323255 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info