336779

Constructa ca 423350 Manual

19
Zoom out
Zoom in
Previous page
1/44
Next page
19
To activate
1. Select the power level Š.
2. Press the + symbol. On the hotplate, the › indicator will
appear. You have now activated the function
To switch off the hotplate
Press the - symbol. The › indicator is no longer displayed and
the hotplate returns to power level Š. The Powerboost function
has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■ to automatically switch off a hotplate.
■ as a timer.
Switching a hotplate off automatically
Enter the cooking time for the desired hotplate. The hotplate will
switch off automatically once this time has elapsed.
How to program
1. Select the required power level.
2. Press the S symbol. The x indicator lights up on the
selected hotplate. ‹‹ appears in the time program function
display. To select another hotplate, press the S symbol
several times, until the x indicator of the required hotplate
lights up.
3. Press the + or - symbol on the time program function. The
basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.
4. Press the + or - symbol until the required cooking time
appears.
After a few seconds, the cooking time will start to count down.
Once the time has elapsed
The hotplate switches off. The beep sounds, and in the time
program function display ‹‹ appears for 10 seconds. The x
indicator lights up on the hotplate display. Pressing the S
symbol turns off the indicators and stops the beep.
Changing or cancelling the time
Press the S symbol several times until the required x
indicator lights up. Change the cooking time using the + or -
symbols, or set to ‹‹.
Notes
■ If a cooking time has been programmed for several plates, it
can be set to display all the time values. To do this, press the
S symbol several times until the x indicator for the required
hotplate lights up.
■ Any cooking time can be programmed for up to 99 minutes.
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a plate may be cancelled or
changed:
Press the S symbol several times until the required x
indicator lights up. Change the cooking time using the + or -
symbols, or set to ‹‹.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1. Press the S symbol several times until the S indicator lights
up. ‹‹ appears in the time program function display.
2. Press the + or - symbol on the time program function. The
basic setting will appear.
+ symbol: 10 minutes.
- symbol: 5 minutes.
3. Set the time required using the + or - symbols.
After a few seconds, the timer will start to count down.
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹ is shown, and the W indicator comes on. After 10 seconds
the indicators turn off.
Pressing the 0 symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the S symbol several times until the S indicator lights
up. Change the time with the + or - symbols, or set to ‹‹.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display, ”and ‰
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
 
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Constructa ca 423350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Constructa ca 423350 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info