161400

Conrad tu 1000 Manual

27
Zoom out
Zoom in
Previous page
1/65
Next page
27
Sender search
• Use the buttons TUNING UP/DOWN (3) to change the reception frequency. Here there are two kinds of station
search available.
• The manual search changes the reception frequency as long as one of the buttons TUNING (3) is held down. The
display (2) does not show the indication AUTO. Release the key as soon as the desired frequency is reached.
• To activate the automatic search, press the AUTO (5) button so that the word AUTO appears in the display (2).
• Press and release the button TUNING (3) to start the search.
• The auto-scan beings and stops only at the next station that can be received well.
• Where reception is bad, it may be the case that the auto-search function does not stop at the desired station. In
this case we recommend the manual search run (see above).
Where reception is bad, you can switch reception to mono using the ST/MONO (7) button (the display
(2) will then show MONO). In this mode of operation, reception is less sensitive to interference.
Programming of Stations
Manual saving
• Select the desired station, either with the manual or automatic search (see above).
• Press the MEM key (4).
• The indication „MEMORY“ will flash in the display (2).
• Press the station key under which you would like to save the station frequency.
• You may choose the station keys 1-10 directly.
• In order to select a station number 11-20, first press the 10 button (to select numbers between 11-20) and then
the corresponding button for the second digit.
Automatic Saving
• Alternatively, stations can also be stored automatically. This feature automatically stores all recievable stations
on the station keys.
• To begin the auto-save feature, press the button APS (8).
• The word SEARCHING appears in the display (2) during the auto-search.
• To interrupt the search, press APS (8) again.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conrad tu 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conrad tu 1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info