Manual Conrad Electronic safe 20 (page 3 of 8) (English, German, Dutch, French)

622831

Zoom out

Zoom in

1/8

Intended use

The safe can be used to store valuables. It has a stable steel casing and can be ﬁ rmly attached

to a wall or placed on a stable surface.

It is operated with 4 batteries of type AA/Mignon The safe can also be opened with the keys

enclosed when the batteries are ﬂ at.

Follow the safety instructions and all other information in this operation manual.

This product complies with the applicable National and European requirements. All names of

Contents

• Safe

• Two keys

• 4 screws and 4 washers

• Operating Instructions

Explanation of the Symbols



This symbol indicates speciﬁ c risks associated with handling, function and use.

☞

The “Hand” symbol indicates special tips and operating information.

Safety Instructions



The warranty will be void in the event of damage caused by failure to observe

these safety instructions! We do not assume any liability for any consequen-

tial damage!

Nor do we assume any liability for material and personal damage caused by

improper use or non-compliance with the safety instructions! In such cases,

the warranty will be null and void.

• The unauthorised conversion and/or modiﬁ cation of the product is not allowed for

safety and approval reasons (CE).

• The product is approved only for mounting and operation in dry, closed rooms. No

part of the product must be allowed to get damp or wet.

• The product is not a toy and should be kept out of the reach of children!

• Do not leave packing materials unattended. They may become dangerous play-

things for children.

Battery Notes

• Batteries should be kept out of the reach of children.

• Do not leave batteries lying around in the open; there is a risk of them being swallowed by

children or domestic animals. If swallowed, consult a doctor immediately.

• Leaking or damaged batteries can lead to caustic burning of the skin. Therefore, use suitable

protective gloves.

• Batteries/rechargeable batteries must not be short-circuited, opened or thrown into a ﬁ re.

There is a risk of explosion!

• Do not recharge normal, non-rechargeable batteries, risk of explosion!

• Do not mix batteries with different charges (e.g. ﬂ at and half-discharged batteries).

☞

Due to safety reasons and operating duration, only high-quality alkaline batteries

should be used and not rechargeable batteries.

Installation

Select a place for installation where the safe is not immediately visible or easily accessible. This

may be behind a closet door or behind books, folders, or similar.

Installation in a partition wall (hollow wall) would also be ideal; a picture may be hung up in

front of the door.

☞

Protect the safe from dampness and humidity. Thus, do not install the safe in rooms

with high humidity or damp basements.

The safe can be mounted to a wall as well as on the ﬂ oor, or another stable surface, using the

holes in the housing.

☞

If the safe is locked upon delivery, use the keys enclosed to open it.

The corresponding lock is hidden behind a small, thin plastic cover, which is situated

directly right to the closing handle.

Suitable screws and screw plugs may be necessary for installation depending on the surface.

Additional ﬁ xation with special clue or similar is possible, if the surface is suitable.

Opening/closing the safe with the key

☞

This may be necessary when the batteries are half-ﬂ at or ﬂ at so that the safe cannot

be opened by entering the access code. The safe can be used in this way without

batteries, if desired.

• Remove the round, thin plastic cover from the lock; it is

situated directly to the right of the closing handle.

• Insert the key into the lock observing the correct orien-

tation and turn the key a little to the left in anti-clockwise

direction.

Hold the key in this position and turn the closing handle

to the right until it stops. Take the key out of the lock and

open the safe door.

• To close the safe, shut the safe door ﬁ rst. Then, turn

the closing handle to the left until it stops; the lock is

engaged.

Check the lock; you should not be able to turn the closing handle to the right.

☞

If you accidentally turn the closing handle to the left when the safe door ist open

so that both lock bolts reach out of the safe door (the safe cannot be closed now),

simply proceed as described above.

Inserting/Replacing Batteries

• Open the safe using the keys as described above.

• Open the battery case at the back of the door; to do this, slide the cover backwards until it can

be removed.

• Insert four new „AA/mignon“ batteries with the correct polarity (observe +/Plus and -/Minus).

• Close the battery compartment again.

• Replacing the batteries is necessary, when the red LED light up when opening the safe or

the safe cannot be opened when entering the code. The access code is maintained when

replacing the batteries.

☞

If the safe does not respond to entries on the number pad, it can also be opened

using the keys enclosed. The corresponding lock is situated under a thin plastic

cover right to the closing handle, see image above.

Operation

Opening the safe by entering the code

• Enter the code and then press either the asterisk or the hash key. A beep will be heard every

time a key is pressed.

☞

The default setting for the code is “159”.

• When the code is correct, the green LED will light up and two beeps will be heard.

Turn the closing handle to the right until it stops within 5 seconds and open the door. If the

closing handle is not moved, the lock closes automatically after 5 seconds due to safety

reasons.

• If the code is incorrect, 3 beeps will be heard. After entering the wrong code three times, the

number pad is locked for 20 seconds. If a wrong code is entered three times once again, the

number pad is locked for 5 minutes.

• To close the safe, shut the safe door ﬁ rst. Then, turn the closing handle to the left until it stops;

the lock is engaged.

Check the lock; you should not be able to turn the closing handle to the right.

☞

If you accidentally turn the closing handle to the left when the safe door ist open

so that both lock bolts reach out of the safe door (the safe cannot be closed now),

simply proceed as described above.



OPERATING INSTRUCTIONS www.conrad.com

Electronic safe 20

Item no. 75 50 04

Version 02/12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Conrad Electronic safe 20 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Conrad Electronic safe 20 Manual

Product: