552575

Conrad 610630 Manual

46
Zoom out
Zoom in
Previous page
1/104
Next page
46
h) Setting the Hysteresis
For the thermostat not to trigger a switching process at every small temperature change, the
hysteresis can be switched between 1 °C and 2 °C.
Example:
When using the heating mode and a pre-set temperature value of 20 °C, the
thermostat will switch on the heating at a hysteresis of 1 °C at an ambience
temperature of 19.5 °C and off at 20.5 °C.
Setting the hysteresis to 2 °C, the thermostat switches the heating on at 19 °C and
off at 21 °C.
• Briefly press the button “MODE” to terminate setting mode.
• Use the button “1C/2C” to select the desired hysteresis.
Display “1°”: Hysteresis set to 1 °C
Display “2°”: Hysteresis set to 2 °C
• To terminate this setting mode, briefly press “OK”.
The setting mode is left automatically if no button is pushed for approx. 10 seconds.
i) Activating/Deactivating the Switch-on Delay
The switch-on delay prevents connected heating and cooling devices to be switched on or off
too often at quickly fluctuating temperatures.
Example:
When the switch-on delay is activated, a connected heating is only switched on after
it was switched off for 5 minutes before.
In cooling more, the switch-on delay is automatically activated for the protection of the
cold compressor. It cannot be switched off.
• Briefly press the button “MODE” to terminate setting mode.
• Switch the switch-on delay on with the button “DELAY” (the lower left of the display shows
“DLY”) or off.
• To terminate this setting mode, briefly press “OK”.
The setting mode is left automatically if no button is pushed for approx. 10 seconds.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conrad 610630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conrad 610630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info