552575

Conrad 610630 Manual

43
Zoom out
Zoom in
Previous page
1/104
Next page
43
Caution, important!
After selecting the switching programme “PROG 0” (frost protection, icon “
” and
display “PROG 0” in the display), the comfort or savings temperature cannot be set
(see chapter 11. d).
If you want to set the comfort or savings temperature, first select a different switching
programme than “PROG 0”.
• The switching programmes “PROG 10” to “PROG 19” can be freely programmed by you.
Use the button “PROG#” to select, e.g. the switching programme “PROG 10”.
The left dash at the 24h timeline flashes; the time “0:00” appears.
Use the buttons “
” (3) or “ ” (4) to select the temperature value the thermostat is
supposed to keep between 0:00 and 0:59 hours.
The button “
” (3) represents the comfort temperature and the button “ ” (4) for the savings
temperature (night reduction).
When pushing the button “ ” (3), a dash will appear with the respective hour; the
button “ ” (4) will make the dash by the respective hour disappear.
After every push of a button, the flashing dash moves one hour to the right and the hour
displayed is increased by one.
• To set the switching programme for the next weekday, push the button “PROG”. At the top
of the display, the wide black bar for the weekday display moves on by one day.
As described above, select the switching programme for the new weekday with the “PROG#”
button (either one of the firmly pre-programmed switching programmes or one of the
switching programmes freely programmed by you).
• To terminate this setting mode, briefly press “OK”. The current time appears again in the
upper left of the display.
The setting mode is left automatically if no button is pushed for approx. 10 seconds.
Programming is assumed.
Important!
The switching programme must be programmed for every weekday. The basic
settings have the switching programme “PROG 1” pre-set for every weekday.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conrad 610630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conrad 610630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info