675127

Conrad 610578 Manual

37
Zoom out
Zoom in
Previous page
1/96
Next page
37
d) Programming
Programming is only possible if the room thermostat is in normal mode (alternate
display of temperature and time).
Different temperature curves can be programmed for every day of the week (in steps of 30
minutes).
Depending on the time of the day and day of the week, you can thus for example set the
normal heating mode temperature for the morning and evening („ “), the temperature
during the day a little lower to save energy („ “), and an even lower temperature at night
(„ “).
You can set a different programme for every day („1“ = Monday, „2“ = Tuesday, … „7“ =
Sunday), or use the three day blocks:
„Monday.....Friday“ (Display: „1 2 3 4 5“)
„Saturday .....Sunday“ (Display: „6 7 „)
„Monday.....Sunday“ (Display: „1 2 3 4 5 6 7“)
Proceed as follows for programming:
• Hold down the „ “ button (approx. 3 seconds) until the weekday or one of the day
blocks starts flashing. Then release the button.
• You can select the desired weekday or day block (see above) with the „ “ and „ “
buttons.
• Confirm the selection with „ “.
• Now the time display „0:00“ and the first point column in the bar display for the
temperature curve flash.
• Press „ “ , „ “ or „ “ to select one of the three temperature values set (see
Chapter 11 c):
Normal temperature value (two dots in the bar display)
Temperature value for night reduction (no dots in the bar display)
Temperature value for economic operation (one dot in the bar display)
• Now set the desired period for the selected temperature value with „ “ and „ “
(in steps of 30 minutes).
• If another period is to be set with another temperature value, press the buttons „ “,
„ “ or „ “ to select the respective temperature value (see above). Then you can
set the period for this temperature value again with the buttons „ “ and „ “.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conrad 610578 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conrad 610578 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info