652338
38
Zoom out
Zoom in
Previous page
1/80
Next page
38 Operating the control software
Sequence Interval: with this setting you determine the interval time the
control system compares the operating hours of the cylinders in order to
change the starting order if sequential cylinder rotation activated.
Note: this setting appears only, if the "Sequence Rotation" function is
activated ("On").
Factory setting: 24 hours
Setting range: 24 ... 1000 hours
Linkup Timeout: with this setting you determine, how long the units of a
linkup systems can operate without connection among each other, before
an error message is triggered.
Note: this setting appears only on the "Main" unit of a linkup system.
Factory setting: 60 seconds
Setting range: 60 ... 120 seconds
Zero Out A: this parameter indicates at which percentage of the demand
signal cylinder A is switched on (calculated value).
Full Out A: this parameter indicates at which percentage of the demand
signal cylinder A is switched off (calculated value).
Zero Out B: this parameter indicates at which percentage of the demand
signal cylinder B is switched on (calculated value).
Full Out B: this parameter indicates at which percentage of the demand
signal cylinder B is switched off (calculated value).
5.4.4 Basicsettings–"General"submenu
In the "General" submenu you determine the basic settings for operating the Condair RS control software.
Basic Tab
Date: with this setting you determine the current date in the set format
("MM/DD/YYYY" or "DD/MM/YYYY").
Factory setting: 00/00/0000
Time: with this setting you set the current hour of the day in the set time
format ("12H" or "24H", see Time/Date Tab below).
Factory setting: 12:00
Language: with this setting you determine the dialogue language.
Factory setting: depending on the country
Options: various dialogue languages
Units: with this setting you determine the desired unit system.
Factory setting: depending on the country
Options: Metric or Imperial
38


Need help? Post your question in this forum.

Forumrules
1

Forum

condair-rs

Reset search

  • why drain hose led to left, is it due to electrical on right side.
    Submitted on 29-8-2022 at 23:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair RS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair RS in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair RS

Condair RS Installation Guide - English - 80 pages

Condair RS User Manual - Dutch - 80 pages

Condair RS Installation Guide - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info