652338
19
Zoom out
Zoom in
Previous page
1/80
Next page
19Operating the control software
5.1.1 Operating status indication
The following operation status indications may appear during operation:
Operating status indications Description
The control is initialising.
The Condair RS is in standby mode (no demand present).
The Condair RS performs a cylinder ushing.
The Condair RS is producing steam (humidifying).
The Condair RS checks the function of the level unit.
The Condair RS is connected to a BMS, and the BMS has activated the diagnostic mode.
The Condair RS has been stopped via an external enable contact (remote enable/disable).
The Condair RS is in standby mode and the keep warm function is activated.
The Condair RS is stopped due to a malfunction which prevents further operation. Additionally
"Warning" or "Fault" is displayed in the maintenance and malfunction eld.
5.1.2 Maintenance and malfunction indications
The following maintenance and malfunction indications may appear during operation:
Maintenance and
malfunction indications
Description
No malfunction present. By pressing on the indication eld the service menu can be accessed.
This message appears if the maintenance counter for the large maintenance has elapsed. If the
large maintenance is not carried out, and the maintenance counter is not reset within 7 days,
a corresponding fault message appears.
Carry out the large maintenance, then reset the maintenance counter in the "Service" submenu.
This message appears if the maintenance counter for the small maintenance has elapsed. If the
small maintenance is not carried out, and the maintenance counter is not reset within 7 days,
a corresponding fault message appears.
Carry out the small maintenance, then reset the maintenance counter in the "Service" submenu.
A malfunction with status "Warning" is active. Additionally the status LED lights yellow. De-
pending on the malfunction the Condair RS is either be stopped or stays operable for a certain
period of time.
The Condair RS was stopped due to a malfunction, which prevents further operation. Addition-
ally the status LED lights red.
19


Need help? Post your question in this forum.

Forumrules
1

Forum

condair-rs

Reset search

  • why drain hose led to left, is it due to electrical on right side.
    Submitted on 29-8-2022 at 23:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair RS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair RS in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair RS

Condair RS Installation Guide - English - 80 pages

Condair RS User Manual - Dutch - 80 pages

Condair RS Installation Guide - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info