652345

Condair Mk5 Manual

53
Zoom out
Zoom in
Previous page
1/68
Next page
53
– Proportional range(P-band)oftheinternalPIcontroller
ProportionalrangeoftheinternalPIcontrollerin%.
Note:ThismenuoptionisavailableonlyiftheinternalPIcontrollerisactive.
Factory setting: 30 %
Setting range: 4…100 %
Note: The P-Range is used to smooth the control characteristic. Increasing
the P-Range boosts the smoothing applied to the control characteristic.
However,thiscausesapermanentdeviation,proportionaltothebandwidth
oftheP-Range.
– Integral timeoftheinternalPIcontroller
IntegraltimeoftheinternalPIcontrollerinminutes.
Note:ThismenuoptionisavailableonlyiftheinternalPIcontrollerisactive.
Factory setting: 10 Minutes
Options: off(000/integraltimedisabled),2 - 100 Minutes
Note:Theintegraltimesettingdeterminestheperiodallowedtoreachthe
nominal humidity. Setting the integral time to the optimal value prevents the
controlcharacteristicfromovershootingand,atthesametime,balances
the permanent deviation caused by the P-Range value.
– Soft start
Enabling(on)ordisabling(off)theSoftstartfunction.
Note:Enablethesoftstartfunctionifyouareusingsoftenedwaterorwater
withahighconductivity.
Factory setting: off
Available settings: on(Softstartenabled),off(Softstartdisabled)
Note:Afterrestartoraftertheunithasbeenidlefor4hours(stand-by)theSoft
startfunctionreducesthehumidicationcapacitytoapresetvalueforaselect-
ableperiod(valuesettingsseeparametersbelow).
– Time limit for Soft start
SelectthetimelimitfortheSoftstartfunctioninminutes.
Note:ThismenuitemisavailableonlyiftheSoftstartfunctionisenabled.
Factory setting: 30 minutes
Setting range: 1…255 minutes
– Capacity limit for Soft start
SetthecapacitylimitfortheSoftstartfunctionin%ofmaximumhumidica-
tion capacity.
Note:ThismenuitemisavailableonlyiftheSoftstartfunctionisenabled.
Factory setting: 50 %
Setting range: 4…100 %
Integr.time[min]
010
P-band [%]
030
softstart
off
softstart time
30 Min
softst. power
50 %
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair Mk5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair Mk5 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info