652343
40
Zoom out
Zoom in
Previous page
1/48
Next page
40 Installation
Connecting the 14-core inter-connecting cable from the hydraulic module
K2
X4
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Level Sensor 1
GND Pumps 4&5, Drain & Sensor
GND Pumps 1,2&3
VCC Pumps 1,2&3
VCC Pumps 4&5
Signal Pump 4
Signal Pump 2
Signal Pump 1
Signal Pump 3
Signal Pump 5
Signal Drain Pump
VCC Drain&Inlet Valve
GND Drain Valve
GND Inlet Valve
Control unit
The 14-core inter-connecting cable “K2” from the hy-
draulic module is to be connected according to the
wiring diagram to the terminals “X4”. The 14-core inter-
connecting cable must be fed through the rectangular
cable feed through into the control unit.
Note: The 5 m inter-connecting cable has to be cut to
length on site.
Connecting the remote operating and fault indication (option)
H1
Error
1 2 3
Service
4 5 6
Running
7 8
Unit On
9 10
Control unit
The optional remote operating and fault indication board
contains four potential-free relay contacts for the con-
nection of the following operating and fault indications:
“Error”:
This relay is activated if an error is present.
“Service”:
This relay is activated when the set service interval
has expired.
“Running” (Humidication/Cooling):
This relay closes as soon as the Condair ME is hu-
midifying/cooling.
“Unit on”:
This relay closes as soon as the voltage supply to
the control unit of the Condair ME is switched on.
The connecting cable must either be fed through the
rectangular cable feed through or a free cable gland into
the control unit.
The maximum contact loading is 250V/8A.
Appropriate suppressor modules are to be used for the
switching of relays and miniature contactors.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair ME Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair ME Control in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info