652340
73
Zoom out
Zoom in
Previous page
1/80
Next page
73
8.2 Resetting the error indication (red LED lights)
Toresettheerrorindication:
Disconnectthesteamairhumidierfromthemains.Waitapprox.5seconds,thenreconnect
the unit to the mains.
Note:Ifthefaulthasnotbeeneliminated,theerrorindicationreappearsafterashortwhile.
8.3 Notes on fault elimination
DANGER!
Fortheeliminationoffaultssetthesteamhumidieroutofoperation as described in chapter 6.4,
separate the unit from the mains and secure it against inadvertent power-up.
Theeliminationoffaultsmustbecarriedoutbyqualiedandwelltrainedprofessionalsonly.
Malfunctionsrelatingtotheelectricalinstallation(e.g.replacementofthebackupbatterie,replace-
mentoffuses,etc.)mustberepairedbyauthorizedpersonnelorbyyourCondairrepresentative’s
service technician only.
RepairworkandthereplacementoffaultycomponentsmustbecarriedoutbyyourCondairrepre-
sentative’sservicetechnicianonly!
Warning Error Cause Remedy
LED Display LED Display
Humidity sensor signal (signal Y)
missing
Humidity sensor signal (signal Y)
missing for more than 1 minute
–––
Warning
W32A: Ctrl.Sens.Broken
red
lights
Error
E32A: Ctrl.Sens.Broken
No sensor signal present at signal input
(Signal Y).
Check humidity sensor (signal Y) , replace
if necessary. Inspect wiring.
Signal of humidity limitation sen-
sor (signal Z) missing
Signal of humidity limitation
sensor (signal Z) missing for more
than 1 minute
–––
Warning
W33A: Lim.-Sens.def.
red
lights
Error
E33A: Lim.Sens.Broken
No sensor signal present at signal input
(signal Y).
Check humidity sensor (signal Y) , replace
if necessary. Inspect wiring.
Module A (B) locked via Modbus
–––
Warning
W34A: Modbus disable
––– Module A (B) locked because the corre-
sponding Modbus register is deactivated.
Activate the corresponding Modbus
register.
Modbus Timeout (5 s)
––– ––– red
lights
Error
E35A: Modbus Timeout
No actual demand or humidity signal
received via Modbus.
Send actual demand or humidity signal.
Standby draining of
steam cylinder active
–––
Warning
W36A: Standby Drain
––– ––– Automatic standby draining of steam
cylinder active.
No measures must be taken.
Forced draining of
steam cylinder active
–––
Warning
E37A: Forced Drain
––– ––– Forced draining of steam cylinder active. No measures must be taken.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair CP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair CP3 in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair CP3

Condair CP3 Usermanual and installation guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info