652340
44
Zoom out
Zoom in
Previous page
1/80
Next page
44
5.5.5 Inserting the CP3 Card
All important operating parameters such as the maximum steam capacity, the heating voltage, the
numberofbaseunitsaswellasthedifferentiationbetweenmainandextensionunitarepermanently
storedontheCP3Card.
Beforeyoustarttheelectricalinstallation,check whether the CP3 Card is installed.Ifitisnot,
check whether the type designation on the CP3 Card supplied corresponds with the type
designation on the data plate of the unit (the data plate is located above the type plate of the
unit).Ifthedesignationsmatch,placetheCP3Cardinthecardholderoncontrolprint.Thencover
thedataplateabovethetypeplatewiththedataplatesupplied(self-adhesive).
IfthetypedesignationontheCP3Cardandthedataplatedonotmatch,theCP3Cardmustnotbe
installed.Ifthisisthecase,contactyourCondairsupplier.
5.5.6 Notes on electric installation
The electric installation must be carried out according to the wiring diagram in chapter 5.5.1 or
5.5.2andtheapplicablelocalregulations.Allinformationgiveninthecorrespondingwiringdiagram
mustbefollowedandobserved.
All cables must be lead into the unit via the cable openings equipped with cable glands (e.g. op-
tion“PG-cablegland”).Thecablefortheheatingvoltagesupplymustbeleadintotheunitfrom
the bottom via the cable opening equipped with the clamp strap. Fix the cable with the clamp
strap.
– Makesurethecablesdonotscrubonanycomponents.
Maximum cable length and required cross section per wire must be observed.
– Thesupplyvoltagesforheatingandcontrolmustmatchtherespectivevoltagesstatedinthe
wiring diagram.
5.5.7 Inspecting the electrical installation
Checkthefollowingpoints:
Dothesupplyvoltagesforheatingandcontrolcomplywiththerelevantvoltagesgiveninthe
wiringdiagram?
IsthecorrectCP3Cardinserted?
Arethevoltagesupplies(heatingandcontrolvoltage)correctlyfused?
Istheserviceswitch“Q..”installedinthesupplylinefortotheheatingandcontrolvoltage?
Areallcomponentscorrectlyconnectedaccordingtothewiringdiagram?
Areallconnectingcablesfastened?
Aretheconnectingcablesfreeoftension(passedthroughcableglands?)
Doestheelectricinstallationmeettheapplicablelocalregulationsforelectricinstallations?
Isthefrontpanelmountedandcorrectlyxedwiththetwoscrews?
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Condair CP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Condair CP3 in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Condair CP3

Condair CP3 Usermanual and installation guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info