11
TAKING A PICTURE
En
FLASH READY LED
Note: Do not power the camera off or switch modes while the camera is capturing or storing a picture or
video clip to prevent corrupting the picture or video clip being stored.
TAKING A PICTURE WITH THE LCD
Taking a picture with the LCD:
1. Turn on the camera.
2. Frame the subject in the LCD.
3. Press the shutter button half-way to activate the auto-focus lock until the green
AF LED lights up. (For more information on Focus Lock, please go to
page 12.) (fig.1.1)
• The camera will focus the lens at different distances to find the correct focus
range, and you will hear a rapid click sound from the camera.
4. Press the shutter button fully to capture the image. (fig.1.2)
• The camera will beep when the image is captured if sound is activated.
• The camera will make a click sound.
• When the image has been captured, the Flash Ready LED next to the
viewfinder will blink to indicate that the image is being stored.
•Apreview of the image will be displayed on the LCD for 2 seconds and the
picture counter number displayed in the LCD will be updated.
Note: The best shooting range is from 50 cm to infinity. (20 in. to infinity)
