INSTALLING YOUR EYE-Q3X CAMERA SOFTWARE:
You must first install the Eye-Q 3x software before you can download
pictures from your camera into your PC.
1. Insert the Eye-Q 3x CD-ROM into your computer’s CD-ROM Drive.
2. The installation screen will appear. Follow the software installation
instructions on your screen to install the software.
If your computer has the CD-ROM automatic installation disabled, click
on START, select MY COMPUTER and locate the CD-ROM Drive. Then,
Double-Click on the CD-ROM Drive icon to show its contents, double-click
on the file named SETUP.EXE and follow the instructions on your screen.
CONNECTING YOUR CAMERA TO YOUR PC AND DOWNLOADING PICTURES
Before you can use your camera to download images to your computer, you
need to install the Eye-Q 3x Software on your computer (see “Installing Your
Eye-Q 3X Camera Software” section above).
Once you have taken a few pictures with your Eye-Q 3X camera or as soon
as the camera’s memory is full, you can download the pictures into your
computer to print, e-mail, store or to manipulate them in creative and fun
ways, utilizing the bonus imaging software that accompanies your Eye-Q 3x.
First, connect your camera to the PC, following these simple steps:
1. Using your fingernail, open the USB port door to access your camera's
USB cable connector.
2. Plug the square end of the (supplied) USB cable to the USB connector in
your camera.
3. Plug the rectangular end of
the USB cable to your PC's
USB port (please refer to
your PC's documentation if
you do not know where the
USB port is located).
4. Turn your Eye-Q 3x
Camera’s power on.
19
COMPUTER CONNECTION