100824
39
Zoom out
Zoom in
Previous page
1/43
Next page
38
TROUBLESHOOTING
Problem Cause Solution
The camera cannot be turned on. Battery is dead. Fully charge the battery or use a
compact power adapter.
The battery compartment door
is open.
Make sure the battery
compartment door is securely
closed.
The camera cannot take pictures
or video clips when the Shutter
button is pressed.
The flash is charging. Wait till the flash is fully charged.
Memory is full. Delete unwanted files or insert a
new SD card.
Maximum file number is
exceeded.
Turn “File No. Reset” on, then
format the card or insert a new
card.
The flash doesn’t fire. Flash is set to OFF. Set the flash to any mode except
OFF.
Image is blurry or out of focus The camera was moving when
the image was captured
Hold the camera steady when
shooting picture.
The subject was beyond the
focus range.
Turn the Macro mode on if the
subject is within 5 - 80 cm (0.16-
2.62 ft.)(W) or 30 – 80 cm (0.98-
2.62 ft.)(T). Don’t use Macro
mode when shooting subjects
further than 80 cm.
Images/video clips cannot be
saved on the SD card.
The SD card is unrecognizable. Format the SD card with the
camera.
The SD card is damaged. Use a new card.
Recorded images/video clips are
not saved in memory
The camera was powered off
before the image/video clips was
stored in memory.
When the low Battery indicator
appears on the LCD monitor,
recharge the battery immediately.
Cannot transfer files onto a
computer after connecting the
USB cable
The camera driver is not installed Install the camera driver before
you connect the camera to a
computer and turn the camera
on.
Images/video clips does not
appear on the television
The cable is not connected
securely.
Connect the camera to the TV
properly.
The TV output setting is incorrect. Change the TV output to NTSC
or PAL.
APPENDIX
6340z UG-ENU (516084-00).indd 386340z UG-ENU (516084-00).indd 38 10/20/04 5:33:07 PM10/20/04 5:33:07 PM
Downloaded from www.Manualslib.com manuals search engine
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concord 6340Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concord 6340Z in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info