8651
6
Zoom out
Zoom in
Previous page
1/35
Next page
ENGLISH
CADSLUDA / CADSLUDB
Hardware Installation Guide
Congratulations on the purchase of your Conceptronic ADSL USB modem.
The enclosed Hardware Installation Guide gives you a step by step explanation of how to install the Conceptronic ADSL USB
Modem on your Notebook/PC. When problems occur, we advise you to go to our support-site (go to www.Conceptronic.net and
click ‘support/2-Tech’). Here you will find a lot of possibilities to solve your problems.
In order to provide the requested support we need the following details from you:
A clear description of the problem;
Version number of the drivers you are using (always check the Conceptronic website to see whether you are using the latest
version);
Type of Notebook/PC you are using;
Operating system you are using
For more information about Conceptronic products, please visit the Conceptronic Web Site: www.conceptronic.net. You can also
send an e-mail to support@conceptronic.net
The Software installation as described below, may be slightly different from the installation on your computer. This depends on the
Windows version you are using.
1. Package contents
ADSL USB Modem
RJ11 cable
USB cable
Driver CD Rom
Manual
To connect your telephone, you need an optional splitter. You can buy this splitter via your telecom provider or via your
Conceptronic dealer.
2. How to install the ADSL USB modem
1. Connect the USB cable to your computer.
2. Connect the other side of the USB cable to your ADSL USB modem.
3. Connect the RJ11 cable to your ADSL USB modem (the ADSL port on the back of the ADSL USB modem).
4. Connect the other side of the RJ11 cable into the phone outlet.
See picture below for the setup.
3.ADSL USB modem driver installation
3.1 Windows 98(SE) driver installation
1. Boot your computer, place the CD-ROM in the CD-ROM drive. After you plugged in the USB cable in the CADSLUA/B and into
the computer, Windows automatically detects new hardware.
2. Click ‘Next’.
3. Select ‘Search for the best driver for your device (Recommended)’.Click ‘Next’.
4. Only select ‘Specify the location of the driver’ and type ‘D:\800’ assuming D is your CD-ROM drive. Click ”Next”.
5. Click ”Next” and ”Finish”.
After the USB driver installation, the ”ADSL USB Modem Configuration Wizard” will start automatically. How to configure the ADSL
USB modem see chapter ”ADSL USB Modem Configuration Wizard”.
3.2 Windows ME driver installation
1. Place the CD-ROM in the CD-ROM drive. After you plugged in the USB cable in the ADSL USB modem and your computer,
Windows automatically detects new hardware.
2. Select ”Specify the location of the driver (Advanced)”. Click “Next”.
3. Specify the location of the driver or Click ”Browse”. Click ”Next”.
4. Click ”Next”.
5. Click ”Finish”.
Service Provider
Network (Telco)
RJ11 CableUSB Cable
Computer
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conceptronic CADSLUDA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conceptronic CADSLUDA in the language / languages: Dutch as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info