498011
41
Zoom out
Zoom in
Previous page
1/176
Next page
ENGLISH
41
6.3 Connecting automatically using WPS
The modem router supports WPS (Wi-Fi Protected Setup). WPS is a standard for easy and secure
establishment of a wireless network. With WPS you can setup and protect your wireless network in just a
few easy steps.
Note: To use WPS with the modem router, you need to have a wireless client that supports WPS. If you
have one or more wireless clients without WPS support, it is advised to manually connect to the
modem router using the preconfigured WPA key as mentioned on the bottom. Refer to chapter 6.1
or 6.2 on how to manually connect to the wireless network.
Note: For more (technical) information about WPS, refer to the following website:
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
With the WPS Push button technology, you can connect a wireless client to the modem router by pressing
a button on each device.
The WPS Push Button technology requires a (virtual) button on the wireless client to establish a
connection between the modem router and the wireless client.
Some wireless clients use an actual button for activating the WPS Push Button technology; other wireless
clients use a virtual button in their software.
Follow the steps below to activate and establish a WPS connection with the Push Button technology:
C. Press the WPS button on the back of the modem router, the WPS LED will start to flash indicating
that WPS authentication has started.
D. Press the WPS button on the wireless client. This can be either a hardware button or a virtual
button in the software of the wireless client.
Note: The modem router will keep the WPS authentication active for 120 seconds. During this process,
the WPS LED will flash. If there is no WPS connection established within 120 seconds, the LED will
turn off and WPS authentication will be stopped.
If the WPS authentication is successful, the WPS LED will bun steady to indicate a successful connection.
The wireless client is now connected to the secured wireless network of the modem router.
You can add more wireless clients without losing the connection to previously connected wireless clients.
If you want to add more wireless clients, you will need to repeat step A and B.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conceptronic C150APRA2 - 150Mbps 11n Wireless ADSL2 Modem - Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conceptronic C150APRA2 - 150Mbps 11n Wireless ADSL2 Modem - Router in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info