8643
20
Zoom out
Zoom in
Previous page
1/28
Next page
FRANÇAIS
- 20 -
4. Connexion du routeur ADSL
1. Connectez le routeur ADSL à un LAN (Réseau d’accès local en utilisant
un Hub ou un Switch) et effectuez la connexion ADSL.
2. Allumez le routeur ADSL (ainsi que le Hub et le Switch).
3. Assurez-vous que les indicateurs LED d’alimentation d’énergie et LAN
sont bien allumés.
4.1 Figuration du réseau sur un ordinateur fonctionnant sous Windows
(Windows 95/98(SE)/ME/2000/NT et XP)
* Pour les options avancées de votre réseau, veuillez lire attentivement le Guide
d’installation du hardware’. (disponible uniquement en anglais.)
Le DHCP du routeur ADSL est activé par défaut lorsque vous avez installé une
carte réseau sur votre ordinateur. Le serveur DHCP du routeur ADSL vous
fournira une adresse TCP/IP. Pour votre carte réseau, vous pouvez garder les
paramètres configurés par défaut. Vous n’avez donc pas besoin de configurer le
TCP/IP, DNS etc.
Votre ordinateur est à présent connecté à votre réseau LAN. Vous pouvez avoir
accès –par exemple - à Internet en utilisant votre routeur ADSL.
4.2 Configuration de votre routeur ADSL
1. Ouvrez votre moteur de recherche et saisissez dans le champ adresse :
http://192.168.1.254 Cette adresse IP est l’adresse IP par défaut de votre
routeur ADSL. Appuyez sur « Entrée ».
2. La boîte de dialogue ‘Saisissez votre mot de passe pour accéder au
réseau’ apparaît ensuite. Il suffit de cliquer sur ‘OK’. Le ‘Nom d’utilisateur’
et le ‘Mot de passe’ ne sont pas configurés par défaut. Vous pouvez les
changer plus tard lors de la configuration de votre routeur ADSL.
3. Cliquez sur WAN -> ISP à gauche de votre écran et sélectionnez un des
protocoles de connexion, selon votre ISP.
Vous pouvez choisir les protocoles suivants:
- PPoE
- PP0A
- RFC1483
- IPoA
- PPTP-to-PPPoA Relaying
4. Veuillez consulter les informations fournies par votre distributeur telecom/
ISP, concernant votre VPI, VCI et les paramètres Protocole.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conceptronic ADSLR1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conceptronic ADSLR1 in the language / languages: Dutch as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info