431477
163
Zoom out
Zoom in
Previous page
1/176
Next page
NEDERLANDS
1
Conceptronic C150APRA2
Gebruiksaanwijzing
Gefeliciteerd met uw nieuwe
Conceptronic draadloze ADSL modem router
In deze gebruiksaanwijzing vindt u stap-voor-stap instructies voor de installatie van de Conceptronic
draadloze ADSL modem router.
Als u meer informatie of ondersteuning voor uw product nodig heeft, kunt u het beste naar onze Service &
Support website op www.conceptronic.net gaan en een van de volgende mogelijkheden kiezen:
FAQ : Database met veel gestelde vragen
Downloads : Gebruiksaanwijzingen, stuurprogramma's, firmware en overige downloads
Contact : Contact opnemen met Conceptronic Support
Voor algemene informatie over Conceptronic producten gaat u naar de Conceptronic website op
www.conceptronic.net.
De informatie in deze snelstart installatiegids is gebaseerd op Windows 7 en Windows Vista en kan dus
afwijken van het gebruik op uw computer als deze een ander besturingssysteem heeft.
NB: In deze snelstartgids vindt u alleen de basisstappen om de draadloze ADSL modem router in gebruik te
nemen. Zie voor meer informatie over de functies en mogelijkheden van de draadloze ADSL modem
router de uitgebreide Engelstalige gebruiksaanwijzing (Extended User's Manual) op de product-cd.
Inhoud
1. Inhoud verpakking
2. Plaats van de onderdelen van de draadloze
ADSL modem router
2.1. Voorpaneel
2.2. Achterpaneel
3. Hardware installeren
3.1. DSL-poort (telefoonlijn)
3.2. LAN-poort(en)
4. Computer configureren
4.1. Uw IP-adres instellen
4.2. Uw verbinding controleren
5. Modem router configureren
5.1. Standaard fabrieksinstellingen
5.2. Configureren via internetbrowser
5.3. Installatiewizard
6. Verbinden met draadloos netwerk
6.1. Handmatig verbinden in Windows 7
6.2. Handmatig verbinden in Windows Vista
6.3. Automatisch verbinden met behulp van WPS
7. Draadloos netwerk handmatig beveiligen
8. Doorschakelregels voor poorten instellen
9. Opnieuw opstarten
NEDERLANDS
2
1. Inhoud verpakking
U vindt de volgende items in de verpakking van de Conceptronic draadloze ADSL modem router:
Conceptronic draadloze ADSL modem router (C150APRA2)
Antenne voor draadloze verbindingen
Netvoeding 12V gelijkstroom, 800mA
LAN-netwerkkabel
RJ-11 telefoonkabel
Product-cd
Deze meertalige gebruiksaanwijzing
Garantiekaart en boekje CE-verklaring
2. Plaats van de onderdelen van de draadloze ADSL modem router
2.1 Voorpaneel
Nr. Beschrijving Status Betekenis status
A Aan/uit-lampje UIT Uitgeschakeld
AAN - GROEN Apparaat staat aan en is opgestart
AAN - ROOD Apparaat is bezig met opstarten
AAN - KNIPPERT Firmware wordt bijgewerkt
B ADSL-lampje UIT Zelfdiagnose bij opstarten mislukt
AAN - KNIPPERT Apparaat is bezig ADSL-signaal te detecteren
AAN - CONTINU ADSL-signaal gedetecteerd, zelfdiagnose gelukt
C Internetlampje AAN - ROOD Geen DSL-verbinding
AAN - GROEN Internetverbinding beschikbaar
D LAN-lampjes UIT LAN-poort is niet aangesloten
(1, 2, 3, 4) AAN - CONTINU Er is een apparaat aangesloten op de LAN-poort
AAN - KNIPPERT Er worden gegevens uitgewisseld
E WLAN-lampjes UIT Draadloos netwerk staat uit
AAN - CONTINU Draadloos netwerk is actief en werkt normaal
AAN - KNIPPERT Activiteit draadloos netwerk (er worden gegevens
ontvangen/verzonden)
F WPS-lampje UIT WPS (Wi-Fi Protected Setup, beveiligde instelling
draadloos netwerk) niet actief
AAN - KNIPPERT WPS actief, nieuwe WLAN-cliënten kunnen worden
toegevoegd
AAN - CONTINU Toevoegen WPS-cliënt voltooid
NEDERLANDS
3
2.2 Achterpaneel
Nr. Beschrijving Betekenis
A Antenne-aansluiting Om de meegeleverde antenne aan te sluiten op de modem router.
B DSL-poort Via deze poort verbindt u de ADSL-lijn met de modem router.
C LAN-poorten (1 4) Hier sluit u computer(s)/netwerkapparatuur aan op de modem router.
D Stroomaansluiting Hier sluit u de netvoeding aan op de modem router.
E Reset Fabrieksinstellingen herstellen (ingedrukt houden).
F WLAN / WPS-knop Kort indrukken (1 sec.) : WiFi aan- of uitzetten
Lang indrukken (> 3 sec.) : Configuratie via WPS-knop starten.
G Aan/uitschakelaar Modem router aan- of uitzetten.
NEDERLANDS
4
3. Hardware installeren
Zet de meegeleverde antenne op de antenne-aansluiting [A] aan de achterkant van de modem router.
Sluit de netvoeding aan op de stroomingang [D] aan de achterkant van de modem router en op een
stopcontact.
Druk op de aan/uitknop [G] aan de achterkant van de modem router.
Het aan/uit-lampje aan de voorkant van de modem router gaat aan en de modem router wordt opgestart.
3.1 DSL-poort (telefoonlijn)
Bij de meeste ADSL-providers moet u een splitter aansluiten tussen telefoonlijn en ADSL-modem om te
voorkomen dat de ADSL-lijn het normale telefoonverkeer stoort. Als u geen splitter gebruikt, kan dit
verder leiden tot verbindingsproblemen of slechte prestaties.
NB: Bij de C150APRA2 wordt geen splitter voor de ADSL-verbinding meegeleverd. Neem zo nodig contact
op met uw telefoon- of internetprovider voor de juiste ADSL-splitter.
ADSL-splitters hebben in het algemeen de volgende aansluitingen:
Line (lijn) : Deze poort moet met het telefoonstopcontact worden verbonden
ADSL : Deze poort moet met de router worden verbonden
Phone (telefoon) : Deze poort moet met een telefoon of ander telefonieapparaat worden verbonden
Zorg dat u de poorten op de juiste wijze aansluit. Als u op de telefoon geen kiestoon hoort, moet u de
verbindingen controleren en ervoor zorgen dat de kabels in de juiste poorten zitten en goed vastzitten.
Gebruik een telefoonkabel om de Conceptronic draadloze ADSL modem router (B) aan te sluiten op uw
analoge telefoonlijn (of splitter). Het ADSL-lampje gaat aan wanneer een ADSL-signaal wordt
gedetecteerd.
NB: Als het ADSL-lampje aan de voorkant niet aan gaat, moet u ervoor zorgen dat:
- de draadloze ADSL modem router aan staat (aan/uit-lampje brandt),
- er een ADSL-signaal op de lijn staat.
Het internetlampje wordt pas groen nadat de juiste instellingen voor DSL en gebruikersaccount via een
webbrowser zijn ingevuld in het menu van de ADSL modem router.
3.2 LAN-poort(en)
Sluit een LAN netwerkkabel aan op een van de vier LAN-poorten aan de achterkant van de draadloze ADSL
modem router en op de netwerkaansluiting van uw computer.
Het LAN-lampje van de gebruikte LAN-poort gaat branden om aan te geven dat er verbinding is met de
computer. (Uw computer moet zijn opgestart en de LAN-aansluiting van de computer moet zijn
ingeschakeld.)
NEDERLANDS
5
4. Computer configureren
4.1 Uw IP-adres instellen
De C150APRA2 heeft een ingebouwde DHCP-server. De DHCP-server kent automatisch een IP-adres toe aan
iedere aangesloten computer als de netwerkverbinding van de betreffende computer staat ingesteld op
Automatisch een IP-adres laten toewijzen
De meeste computers zijn standaard zo geconfigureerd dat ze zich automatisch een IP-adres laten
toewijzen. Wanneer dit niet het geval is, moet u de computer configureren om automatisch een IP-adres
te laten toewijzen door de onderstaande aanwijzingen op te volgen. Deze instructies zijn gebaseerd op
Windows Vista met Service Pack 1. Als uw computer een andere Windows-versie of een ander
besturingssysteem heeft, is het mogelijk dat de benodigde stappen hiervan afwijken.
A. Start Uitvoeren
B. NCPA.CPL
OK
Netwerkverbindingen
C. Klik met de rechter muisLAN-
verbindingDraadloze netwerkverbinding
(afhankelijk van de gebruikte aansluiting) en
Eigenschappen
B
B
C
NEDERLANDS
6

D. Internet Protocol versie 4
(TCP/IPv4)
Eigenschappen
Het venster "Eigenschappen van Internet Protocol version 4 (TCP/IPv4)" wordt getoond.
E. Kies in de Eigenschappen voor
Automatisch een IP-adres laten
toewijzenOK
instellingen op te slaan.
F. Klik in het venster Eigenschappen van de
OK
instellingen op te slaan.
D
D
E
E
NEDERLANDS
7
4.2 Uw verbinding controleren
Met de opdrachtprompt van Windows kunt u nagaan of uw netwerkaansluiting (draadloos of via een
netwerkkabel) een correct IP-adres heeft gekregen. Dit voorbeeld is gebaseerd op Windows Vista met
Service Pack 1. Om de onderstaande stappen te kunnen uitvoeren, moet u onder Windows Vista over
administrator-toegangsrechten beschikken. Daarom wordt ook uitgelegd hoe u deze toegangsrechten kunt
krijgen.
A. Start-knop van Windows Alle programma's Bureau-accessoires
OpdrachtpromptAls administrator uitvoeren
waarschuwing krijgt, moet u dezDoorgaanJa
De opdrachtprompt verschijnt. Controleer of de titelbalk van het opdrachtpromptvenster aangeeft:
Administrator: OpdrachtpromptAdministrator
administrator-rechten die u nodig heeft voor de volgende stappen en moet u stap A opnieuw uitvoeren.
B. IPCONFIGENTER
U moet nu de volgende informatie zien:
IPv4-adres : 192.168.0.xxx (xxx is een getal tussen 100 en 199)
Subnetmasker : 255.255.255.0
Standaardgateway : 192.168.0.1
Als de getoonde informatie overeenkomt met het bovenstaande, kunt u verdergaan met de configuratie
van het apparaat in hoofdstuk 5.
Als de getoonde informatie niet overeenkomt met het bovenstaande (bijv. als uw IP-adres 169.254.xxx.xxx
is), probeer dan de onderstaande mogelijkheden:
1. Zet het apparaat uit en vervolgens weer aan.
2. Sluit de LAN-kabel tussen het apparaat en de computer opnieuw aan.
3. Vernieuw het IP-adres van uw computer door middel van de volgende opdrachten in de
Opdrachtprompt:
- IPCONFIG /RELEASE-adres weer vrij te geven.
- IPCONFIG /RENEW-adres te krijgen van het apparaat.
B
NEDERLANDS
8
Als u het probleem met het IP-adres niet kunt oplossen met de bovenstaande stappen, kunt u de
standaard fabrieksinstellingen herstellen met behulp van de reset-knop aan de achterkant van het
apparaat.
Houd de reset-knop ca. 15 seconden ingedrukt om de standaard fabrieksinstellingen te herstellen.
Wanneer het statuslampje weer brandt, herhaalt u stap B om uw IP-adres te vernieuwen.
NB: Als het probleem blijft terugkomen, controleer dan of alle kabels goed zijn aangesloten. De ADSL-
poort hoort op de ADSL-lijn te zijn aangesloten en de LAN-poort op de computer.
3
3
NEDERLANDS
9
5. Modem router configureren
In dit hoofdstuk leest u hoe u de C150APRA2 kunt configureren met de ingebouwde snelstartwizard. Nadat
u de stappen uit dit hoofdstuk heeft uitgevoerd, is uw router ingesteld op uw ADSL-verbinding en kunt u
verbinding maken met internet.
5.1 Standaard fabrieksinstellingen
Verschillende instellingen van de C150APRA2 zijn standaard al ingevuld. Hieronder vindt u de vooraf
gemaakte instellingen:
IP-adres : 192.168.0.1 (DHCP-server voor LAN/WLAN-cliënten ingeschakeld)
Gebruikersnaam : admin (selecteer deze gebruiker)
Wachtwoord : admin (kleine letters)
Netwerknaam draadloos netwerk : C150APRA2
Kanaal draadloos netwerk : Channel 6 (kanaal 6)
Beveiliging draadloos netwerk : WPA2
UPnP : uitgeschakeld (kan worden ingeschakeld nadat de
internetverbinding is geconfigureerd)
Wanneer u instellingen heeft gewijzigd in de configuratie van de C150APRA2, worden deze opgeslagen in
het geheugen van de modem router. Om de standaard fabrieksinstellingen te herstellen, houdt u de reset-
knop aan de achterkant van het apparaat ca. 15 seconden ingedrukt.
5.2 Configuratie via internetbrowser
De configuratie van de C150APRA2 is webgebaseerd: u maakt hiervoor gebruik van een internetbrowser.
NB: We raden u aan om tijdens het configureren van de router gebruik te maken van een LAN-kabel en
niet van een draadloze verbinding.
A. Start uw internetbrowser (zoals Internet Explorer, Firefox, Safari of Chrome).
B. Geef het IP-adres van het apparaat in in de adresbalk van uw internetbrowser (standaard:
http://192.168.0.1/).
C. Eerst ziet u een aanmeldvenster waarin om een gebruikersnaam en een wachtwoord wordt
admin
adminLogin
configuratie te starten.
NEDERLANDS
10
Overview
(Overzicht):
NB: Overviewgureren en onderhouden van de
C150APRA2.
NEDERLANDS
11
5.3 Installatiewizard
U kunt de internetverbinding van de C150APRA2 instellen met de ingebouwde wizard. Deze wizard helpt u
om de instellingen stap voor stap te configureren.
NB: Voordat u met de snelstart wizard begint, moet u zorgen dat u alle informatie over uw
internetinstellingen bij de hand heeft, zoals accountgegevens, verbindingstype, etc.
A. Quick Start
B. Setup Wizard
(Installatiewizard).
C. Het welkomvenster van de wizard
bevat vier stappen. Klik op Next”
(Volgende) om door te gaan.
D. De ADSL modem router detecteert
de juiste datum en tijd wanneer hij
verbinding heeft met internet. Dit
wordt alleen gebruikt voor het
logboek. U kunt de tijdzone en de
data voor de zomertijd selecteren.
Klik na afloop op Next
(Volgende).
NEDERLANDS
12
E. Selecteer uw land en uw Internet
Service Provider (ISP). De juiste
instellingen voor uw
internetverbinding worden
toegepast. Deze kunnen later
worden aangepast.
Wanneer gebruik wordt gemaakt
van een PPPOE of PPPOA
internetaansluiting, gebruikt u de
gebruikersnaam en het wachtwoord
die u van uw internetprovider heeft
ontvangen.
Klik vervolgens op Next”
(Volgende).
F. U kunt uw draadloze netwerk
aanzetten (enable) of uitzetten
(disable); het staat standaard aan.
De modem router zendt de
C150APRA2
uit, maar u kunt de SSID ook
verbergen. Het apparaat heeft een
vooraf gedefinieerde unieke WPA2-
PSK encryptiesleutel.
NB: U vindt de vooraf
gedefinieerde
encryptiesleutel aan de
onderkant van de modem
router.
U kunt de vooraf gedefinieerde
sleutel zo laten zoals aangegeven in
het menu, of hem vervangen door
een zelfbedachte sleutel.
Next
(volgende).
NEDERLANDS
13
G. Nadat u het draadloze netwerk
heeft geconfigureerd, ziet u het
Setup Summary
instellingen).
Apply
(Toepassen).
Uw apparaat is nu geconfigureerd
en uw internetverbinding is klaar
voor gebruik.
NEDERLANDS
14
6. Verbinden met draadloos netwerk
Er zijn twee verschillende manieren om draadloos verbinding te maken met het netwerk van de modem
router:
- Handmatig.
- Automatisch met behulp van de WPS-functie.
Vrijwel alle merken/types draadloze netwerkkaarten gebruiken een andere cliënt-applicatie. Zie de
gebruiksaanwijzing van uw draadloze netwerkkaart voor informatie over hoe u verbinding maakt met een
draadloos netwerk.
6.1 Handmatig verbinden in Windows 7
In het volgende voorbeeld wordt gebruik gemaakt van de standaardfunctie Verbinding met een netwerk
maken
A. Netwerk
Windows systeemvak voor een lijst met
beschikbare draadloze netwerken.
B. C150APRA2
Verbinding maken
Automatisch
verbinding maken
zorgt ervoor dat de verbinding steeds
automatisch wordt gestart wanneer uw
computer wordt aangezet. Als u dit niet
wilt, kunt u dit vakje uitschakelen
Verbinding maken
! BELANGRIJKE OPMERKING !
De draadloze router is standaard beveiligd met WPA-PSK/WPA2-PSK encryptie (Mixed Mode).
U vindt de unieke WPA "passphrase" (een soort wachtwoord) op de productsticker aan de
onderkant van uw modem router.
NEDERLANDS
15
C. Beveiligingssleutel
standaard WPA passphrase in (zoals
aangegeven op de onderkant van uw
OK
D. De cliënt maakt nu verbinding met het
draadloze netwerk.
E. Om de status van de draadloze
verbinding te controleren, kunt u op het
Netwerk
klikken. U ziet hier met welk netwerk u
momenteel verbonden bent, informatie
over de verbinding, en de sterkte van het
signaal.
NEDERLANDS
16
6.2 Handmatig verbinden in Windows Vista
Verbinding met een netwerk
maken
A. Netwerk
Er
zijn draadloze netwerken
beschikbaar
B. Selecteer het netwerk
C150APRA2
Verbinding maken
C. Geef in het veld
Beveiligingssleutel
standaard WPA passphrase in
(zoals aangegeven op de
onderkant van uw C150APRA2) en
Verbinding maken
NEDERLANDS
17
D. Nadat verbinding is gemaakt,
kunt u ervoor kiezen om dit
netwerk vast te leggen en er
voortaan automatisch verbinding
mee te maken zodra uw
computer wordt aangezet. Klik
Sluiten
verbindingwizard af te sluiten.
E. Om de status van de draadloze
verbinding te controleren, kunt u
Netwerk
het systeemvak klikken. U ziet
hier met welk netwerk u
momenteel verbonden bent,
informatie over de verbinding, en
de sterkte van het signaal.
NEDERLANDS
18
6.3 Automatisch verbinden met behulp van WPS
De modem router ondersteunt WPS (Wi-Fi Protected Setup, beveiligde instelling draadloos netwerk). WPS
is een standaard waarmee u in enkele eenvoudige stappen veilig een draadloos netwerk kunt opzetten.
NB: Om op de modem router gebruik te kunnen maken van WPS, moeten uw draadloze cliënten (zoals
pc's) zelf ook WPS ondersteunen. Als u een of meer draadloze cliëntcomputers heeft die geen WPS
ondersteunen, raden we u aan handmatig verbinding te maken met de modem router en de WPA-
 te gebruiken die aan de onderkant van het apparaat staat aangegeven. Zie paragraaf
6.1 of 6.2 voor handmatige aansluiting op het draadloze netwerk.
NB: Ga voor meer (technische) informatie over WPS naar de volgende website:
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
Via WPS kunt u een draadloze cliënt met de modem router verbinden door op beide apparaten op een
knop te drukken.
Voor deze methode moet uw draadloze cliënt over een (virtuele) knop beschikken om verbinding te
kunnen maken met de modem router.
Sommige draadloze cliënten hebben een echte knop waarmee WPS wordt gestart; andere draadloze
cliënten hebben software met een virtuele WPS-knop.
Volg de onderstaande stappen om via een WPS-knop verbinding te maken met de router:
A. Druk aan de achterkant van de modem router op de WPS-knop; het WPS-lampje gaat knipperen om
aan te geven dat de WPS-authenticatie is gestart.
B. Druk op de WPS-knop van uw draadloze cliënt. Dit kan een hardware-knop zijn of een virtuele knop
in de software van de draadloze cliënt.
NB: De modem router houdt de WPS-authenticatie 120 seconden lang actief. Tijdens dit proces knippert
het WPS-lampje. Als er tijdens deze 120 seconden geen verbinding tot stand komt, gaat het lampje
uit en wordt de WPS-authenticatie afgebroken.
Wanneer de WPS-verbinding is gelukt, brandt het WPS-lampje continu.
De draadloze cliënt heeft nu verbinding met het beveiligde draadloze netwerk van de modem router.
U kunt meer draadloze WPS-cliënten toevoegen zonder dat de bestaande verbinding met eerder
aangesloten cliënten verloren gaat. Als u meer draadloze WPS-cliënten wilt toevoegen, herhaalt u de
stappen A en B.
NEDERLANDS
19
7. Draadloos netwerk handmatig beveiligen
In dit hoofdstuk leest u hoe u het draadloze netwerk van de C150APRA2 handmatig kunt beveiligen. Om
ongeoorloofde toegang tot uw netwerk te voorkomen, is het noodzakelijk uw netwerk te beveiligen.
Volg de onderstaande stappen om het draadloze netwerk handmatig te beveiligen.
A. Meld u aan bij de C150APRA2 zoals beschreven in paragraaf 5.2.
B. WirelessWireless Security
netwerk) in het linkermenu.
NEDERLANDS
20
C. Security Mode
NB: We raden u aan om uw netweAuto (WPA of WPA2)
van het hoogste beveiligingsniveau (WPA2), dat bovendien neerwaarts compatibel is met cliënten
die alleen over WPA beschikken.
D. WPA Encryption
NB: We raden u aan oTKIP+AES
encryptieniveau (AES), dat bovendien neerwaarts compatibel is met cliënten die alleen over TKIP
beschikken.
E. Pre-shared Keyraf gedeelde sleutel).
F. Apply
NB: Onthoud de door u ingegeven beveiligingsinformatie goed, of noteer deze ergens. U heeft deze
informatie nodig wanneer u een computer of andere cliënt draadloos wilt verbinden met de
C150APRA2.
U kunt nu gebruikmaken van de zojuist gemaakte instellingen om uw draadloze cliënt(en) met de
C150APRA2 te verbinden zoals beschreven in paragraaf 6.1 en paragraaf 6.2.
NEDERLANDS
21
8. Doorschakelregels voor poorten instellen
De Conceptronic C150APRA2 heeft een ingebouwde firewall om internetaanvallen op uw netwerk af te
weren. Deze firewall blokkeert automatisch al het inkomende verkeer op ongebruikte poorten. Wanneer u
een geblokkeerde poort nodig heeft voor een toepassing (zoals een FTP-server of webserver) kunt u op de
configuratiepagina's een poortdoorschakelregel aanmaken om het verkeer aan de server te kunnen
doorgeven.
NB: De Conceptronic C150APRA2 ondersteunt Universal Plug & Play (UPnP), zodat UPnP-compatibele
applicaties en apparaten, zoals game consoles, automatisch de poorten die ze nodig hebben kunnen
openen zonder dat daarvoor handmatig moet worden geconfigureerd. Daar staat tegenover dat
UPnP uw netwerkomgeving kwetsbaarder maakt voor aanvallen. Als u toepassingen heeft die
gebruik maken van UPnP, kunt u de UPnP optie inschakelen in de configuratie van de C150APRA2
Advanced Network Tools UPnP
Hieronder vindt u een lijstje met veel gebruikte poortnummers en de bijbehorende applicaties:
Poort Applicatie Poort Applicatie
20 FTP-data (FTP-server)
21 FTP (FTP-server)
22 SSH (secure shell)
23 Telnet
25 SMTP (mailserver uitgaand)
80 HTTP (webserver)
110 POP3 (mailserver inkomend)
2000 Remotely Anywhere
5800 VNC
5900 VNC
Zie voor meer poorten en bijbehorende applicaties: http://portforward.com/cports.htm
NB: Als u gebruik maakt van poortdoorschakelingsregels, raden we u aan om de computer(s) een vast
(statisch) IP-adres te geven in plaats van een dynamisch IP-adres.
NB: Zie voor een gedetailleerde beschrijving van de opties voor poortdoorschakelingen en DMZ de
uitgebreide gebruiksaanwijzing (Extended User's Manual, uitsluitend in het Engels) op de product-
View User Manual-menu.
A. Meld u aan bij de C150APRA2 zoals beschreven in paragraaf 5.2.
B. Advanced
C. Port Forwarding in het linkermenu.
De Port Forwarding configuratie wordt op uw scherm weergegeven.
NEDERLANDS
22
NB: In de bovenstaande afbeelding ziet u een voorbeeld van een poortdoorschakelingsconfiguratie.
NEDERLANDS
23
D. Addregel toe te voegen.
E. Select a Service
een service), of geef een nieuwe servicenaam in voor uw poortdoorschakelregel in het veld
Custom Server
F. Geef het IP-Server IP
Address
G. External Port
StartExternal Port Endterne poort).
H. ProtocolTCPUDP
Both
NB: Both
deze optie wordt zowel TCP- als UDP-verkeer doorgegeven aan het hier voor uw computer/server
ingestelde IP-adres.
I. Geeft de poorten die op Internal Port
StartInternal Port End
J. KlApply
De zojuist toegevoegde regel staat nu in de lijst met poortdoorschakelingen.
Als u meer poortdoorschakelregels wilt maken, herhaalt u de stappen D t/m J.
NEDERLANDS
24
9. Opnieuw opstarten
Wanneer u instellingen verandert in de configuratie van de modem router, worden de nieuwe instellingen
direct toegepast en geactiveerd. Wanneer u grote of belangrijke wijzigingen in de configuratie aanbrengt,
raden we u aan om de C150APRA2 bovendien opnieuw op te starten om ervoor te zorgen dat alle
wijzigingen correct worden toegepast.
A. Meld u aan bij de C150APRA2 zoals beschreven in paragraaf 5.2.
B. Magement
C. System Management
D. Reboot
Tijdens het opstarten ziet u een voortgangsbalk op uw scherm.
Wacht tot de vooruitgangsbalk aan het eind is voordat u zich opnieuw aanmeldt.
Uw C150APRA2 is nu klaar voor gebruik!
NB: Zie voor een gedetailleerde beschrijving van de mogelijkheden en instellingen van de C150APRA2
de uitgebreide gebruiksaanwijzing (Extended User Manual, uitsluitend in het Engels) op de product-
View Extended User Manual
Autorun-menu.
NEDERLANDS
25
Conceptronic C150APRA2
User Manual
Congratulations on the purchase of your
Conceptronic wireless ADSL modem router.
This user manual gives you a step-by-step explanation of how to install and use the Conceptronic wireless
ADSL modem router.
When you need more information or support for your product, we advise you to visit our Service &
Support website at www.conceptronic.net/support and select one of the following options:
FAQ : Frequently Asked Questions database
Downloads : Manuals, Drivers, Firmware and more downloads
Contact : Contact Conceptronic Support
For general information about Conceptronic products visit the Conceptronic website at
www.conceptronic.net.
The information in this quick installation guide is based on Windows 7 and Vista, but can differ from your
computer when you are using a different operating system.
Note: This user manual only explains the basic steps to get the wireless ADSL modem router up and
running. For more info about the various functions of the wireless ADSL modem router, please
refer to the extended user manual (English only) on the product CD-ROM.
Table of contents
1. Package contents
2. The wireless ADSL modem router explained
2.1. Front panel
2.2. Back panel
3. Hardware Installation
3.1. DSL (Telephone) port
3.2. LAN port(s)
4. Configuring the computer
4.1. Configure your IP address
4.2. Checking your connection
5. Modem router configuration
5.1. Factory default settings
5.2. Web-based configuration
5.3. Setup wizard
6. Connecting to the wireless network
6.1. Connecting manually in Windows 7
6.2. Connecting manually in Windows Vista
6.3. Connecting automatically using WPS
7. Manually configure wireless security
8. Setting up port forwarding rules
9. Rebooting
ENGLISH
26
1. Package contents
The following items are present in the package of the Conceptronic wireless ADSL modem router:
Conceptronic wireless ADSL modem router (C150APRA2)
Antenna for wireless connections
Power supply 12V DC, 800mA
Network (LAN) cable
RJ-11 phone cable
Product CD-ROM
This multi language user manual
Warranty card & CE declaration booklet
2. The wireless ADSL modem router explained
2.1 Front panel
Nr Description Status Status Explanation
A Power LED OFF Power is OFF
ON - GREEN Power is on and the initialization is normal
ON - RED Device is initiating
ON - FLASHING Firmware is upgrading
B ADSL LED OFF Initial self test failed
ON FLASHING Device is detecting DSL signal
ON - STEADY DSL signal detected, self test succeeded
C Internet LED ON - Red No DSL connection
ON - Green Internet connection available
D LAN LEDs OFF LAN port is not connected
(1, 2, 3, 4) ON - STEADY A device is connected to the LAN port
ON - FLASHING Data is being transmitted
E WLAN LEDs OFF Wireless LAN is turned off
ON - STEADY Wireless LAN is active and normal
ON - FLASHING Wireless LAN activity (sending or receiving data)
F WPS LED OFF WPS (Wi-Fi Protected setup) not active
ON - FLASHING WPS active, new WLAN clients can be added
ON STEADY WPS client successfully added
ENGLISH
27
2.2 Back panel
Nr Description Explanation
A Antenna connection Connect the included antenna to the modem router.
B DSL port Connect your ADSL line to the modem router.
C LAN ports (1 4) Connect your computer(s)/network device(s) to the modem router.
D Power connector Connect the power supply to the modem router.
E Reset Perform a factory reset (hold).
F WLAN / WPS button Short press (1 sec) : Turn WiFi on or off.
Long press (> 3 sec) : Start WPS Push Button configuration.
G Power button Turn the modem router on or off.
ENGLISH
28
3. Hardware Installation
Connect the included antenna to the antenna connection [A] on the back of the modem router.
Connect the power supply to the power connection [D] on the back of the modem router and to an
available wall socket.
Press the power [G] button on the back of the modem router.
The power LED on the front of the modem router will light up and the modem router will perform a
system startup.
3.1 DSL (Telephone) port
Most ADSL providers require a splitter between your phone line and the ADSL modem that prevents the
ADSL line from interfering with regular telephone services. Not using such a splitter could lead to
connection problems or bad performance.
Note: The C150APRA2 is not delivered with a splitter for the ADSL connection. Please contact your
telephone or internet provider for the correct ADSL splitter.
The connection ports of an ADSL splitter are typically labelled as following:
Line : This port connects to the wall jack
ADSL : This port connects to the router
Phone : This port connects to a telephone or other telephone device
Make sure the lines are properly connected. If you are unable to hear a dial tone with the telephone,
check the connections to make sure the cables are securely attached and connected to the correct port.
Use a telephone cable to connect the Conceptronic wireless ADSL modem router (B) to your local analog
telephone line (or splitter). The ADSL led will light up when an ADSL signal has been detected.
Note: If the ADSL LED on the front does not lit up, make sure that:
- The wireless ADSL modem router is powered on (the power LED should burn).
- There is an ADSL signal on the line.
- The Internet LED will only be green when correct DSL and user account settings are applied
into the Web Interface of the ADSL modem router.
3.2 LAN port(s)
Connect the network (LAN) cable to 1 of the 4 LAN ports on the back panel of the wireless ADSL modem
routerand to the network card of your computer.
The LAN LED of the used LAN port will lit up, indicating that the computer is connected. (Your computer
must be switched on and the LAN connection must be enabled).
ENGLISH
29
4. Configuring the computer
4.1 Configure your IP address
The C150APRA2 is equipped with a built-in DHCP server. The DHCP server will automatically assign an IP
address to each connected computer if Obtain an IP address
automatically
By default most computers are configured to automatically obtain an IP address. When this is not the
case, you will need to configure your computer to obtain an IP address automatically by following the
instructions below. These instructions are based on Windows Vista with Service Pack 1. If your computer
has a different version or operaring system, the steps required might be different.
A. Start Run
B. NCPA.CPL
OK
Network Connections
C. Local Area Connection
or wireless, depending on the connection you
Properties
B
B
C
ENGLISH
30
The Properties window of the Local Area Connection will appear.
D. Internet Protocol Version 4
(TCP/IPv4)Properties
The Properties window of the Internet Protocol Version 4 (TCP/IPv4) will appear.
E. Obtain an IP
address automaticallyOK
to save the settings.
F. OK
the Local Area Connection to save the
settings.
D
D
E
E
ENGLISH
31
4.2 Checking your connection
With the Command Prompt of Windows you can verify if you have received a correct IP address on your
(wired or wireless) Local Area Connection. This example is based on Windows Vista with Service Pack 1.
Windows Vista needs administrative rights to perform the steps below. There is an explanation on how to
gain administrative rights.
A. Start All programs AccessoriesCommand PromptRun
as administrator You might get a warning message, which you need to accept by clicking
Continue
The Command Prompt will appear. Make sure the Command Prompt title baAdministrator:
Command PromptAdministrator
rights for these steps and you will need to perform step A again.
B. IPCONFIGENTER.
You should see the following information
IPv4 Address : 192.168.0.xxx (Where xxx can vary between 100 ~ 199).
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
If the information shown above matches your configuration you can continue the configuration of the
device in Chapter 5.
If the information shown above does not match your configuration (i.e. your IP address is 169.254.xxx.xxx)
please check the options below:
1. Power off and power on the device.
2. Reconnect the LAN cable to the device and to your computer.
3. Renew the IP address of your computer with the following commands:
- IPCONFIG /RELEASE
- IPCONFIG /RENEW
B
ENGLISH
32
If above steps do not solve the IP address problem, you can reset the device to the factory default settings
with the Reset button on the back of the device.
Press and hold the Reset button for +/- 15 seconds to load the factory default settings. When the Status
LED is active again, repeat step B to renew your IP address.
Note: If the problem remains, check if all cables are connected correctly. The ADSL port should be
connected to the ADSL line and the LAN port to the computer.
3
3
ENGLISH
33
5. Modem router configuration
This chapter describes how to configure the C150APRA2 using the built-in Quick Start Wizard. After
completing the steps in this chapter your router has been set up for an ADSL connection and will be able
to connect to the internet.
5.1 Factory default settings
The C150APRA2 is preconfigured with several settings. The preconfigured settings can be found below:
IP Address : 192.168.0.1 (DHCP Server for LAN/WLAN clients Enabled)
Username : admin (select this user)
Password : admin (small characters)
Wireless SSID : C150APRA2
Wireless Channel : Channel 6
Wireless Security : WPA2
UPnP : disabled (can be enabled when internet connection is configured)
When you have changed settings in the configuration of the C150APRA2, they will be saved to the memory
of the router. To restore the factory default settings, press and hold the reset button on the back of the
device for +/- 15 seconds.
5.2 Web-based configuration
The configuration of the C150APRA2 is web based. You will need a web browser for the configuration of
the device.
Note: For configuration of the router it is advised to use a LAN cable connection to the device instead of a
wireless connection.
A. Start your web browser (like: Internet Explorer, FireFox, Safari or Chrome).
B. Enter the IP address of the device in the address bar of your web browser (by default:
http://192.168.0.1/).
C. You will first get a login window asking you for a Useradmin
from the dropdown list, enter the password for the administrator (default = adminlick
Login-based configuration.
ENGLISH
34
overview
overview
ENGLISH
35
5.3 Setup wizard
You can setup the internet connection of the C150APRA2 through the built-in wizard. This wizard will help
you configuring the settings step by step.
Note: Before you begin with the Quick Start Wizard, make sure you have all information about your
internet settings available. (For example: account information, connection type, etc.)
A. Quick Start
B. Setup Wizard
C. The welcome screen lists four steps
of the wizard. Click Next” to
continue.
D. The ADSL modem will detect the
correct date and time when it is
connected through the Internet.
This will only be used for logging.
You can select the timezone and
daylight time savings dates. When
completed, click Next
E. Select your country and Internet
Service Provider. The correct
settings for your internet
connection will be applied. This can
be modified afterwards.
When using PPPOE or PPPOA
internet connections, use the
username and password you have
received from your Internet Service
Provider.
When completed, click Next
ENGLISH
36
F. You can enable or disable your
Wireless Network (enabled by
default). The modem router shows
itself with the SSID C150APRA2
but you can also hide the SSSID. It is
pre-configured with a unique WPA2-
PSK security key.
Note: You can find the pre-
configured security key on
the bottom of the modem
router.
You can keep the key as found in
the User Interface or change it in a
Pre-Shared Key you like.
Next
G. After completing the Wireless LAN
configuration you will get the
Setup Summary with an overview
of the settings.
Apply
Your device will now be configured
and your internet connection will be
ready to use.
ENGLISH
37
6. Connecting to the wireless network
There are two different ways of wirelessly connecting to the network of the modem router:
- Manually.
- Automatically using the WPS function.
Almost every brand/type wireless card uses a different client application. Please refer to the manual of
your wireless network card for information on how to create a connection with a wireless network.
6.1 Connecting manually in Windows 7
Connect to a Network
A. Network
taskbar to view the list of available
wireless network connections.
B. C150APRA2
Connect
Connect
automatically
sure the connection is automatically
started each time your computer is
turned on. If you do not want this, you
can unselect this option before clicking
Connect
! IMPORTANT NOTE !
The wireless router is secured with WPA-PSK/WPA2-PSK (mixed mode) encryption by default.
The unique WPA passphrase can be found on the product sticker of your modem router.
ENGLISH
38
C. Enter the default WPA passphrase (which
is mentioned on the bottom of the
Security key
field and cOK
D. The client will now start connecting to
the wireless network.
E. To check the status of the wireless
connection, you can click on the
Network
see which network you are currently
connected to, the access you have and
the signal strength of the connection.
ENGLISH
39
6.2 Connecting manually in Windows Vista
Connect to a Network
Pack 1 is used.
A. Network
the system tray and click on
Wireless networks are
available
B. Select the network
C150APRA2
Connect
C. Enter the default WPA passphrase
(which is mentioned on the
bottom of the C150APRA2) in the
Security key or passphrase
Connect
ENGLISH
40
D. When the connection has been
established, you can choose to
save the network and have it
start automatically each time
your computer is turned on. Click
Close
wizard.
E. To check the status of the
wireless connection, you can
Network
the system tray. You will see
which network you are currently
connected to, the access you
have and the signal strength of
the connection.
ENGLISH
41
6.3 Connecting automatically using WPS
The modem router supports WPS (Wi-Fi Protected Setup). WPS is a standard for easy and secure
establishment of a wireless network. With WPS you can setup and protect your wireless network in just a
few easy steps.
Note: To use WPS with the modem router, you need to have a wireless client that supports WPS. If you
have one or more wireless clients without WPS support, it is advised to manually connect to the
modem router using the preconfigured WPA key as mentioned on the bottom. Refer to chapter 6.1
or 6.2 on how to manually connect to the wireless network.
Note: For more (technical) information about WPS, refer to the following website:
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
With the WPS Push button technology, you can connect a wireless client to the modem router by pressing
a button on each device.
The WPS Push Button technology requires a (virtual) button on the wireless client to establish a
connection between the modem router and the wireless client.
Some wireless clients use an actual button for activating the WPS Push Button technology; other wireless
clients use a virtual button in their software.
Follow the steps below to activate and establish a WPS connection with the Push Button technology:
C. Press the WPS button on the back of the modem router, the WPS LED will start to flash indicating
that WPS authentication has started.
D. Press the WPS button on the wireless client. This can be either a hardware button or a virtual
button in the software of the wireless client.
Note: The modem router will keep the WPS authentication active for 120 seconds. During this process,
the WPS LED will flash. If there is no WPS connection established within 120 seconds, the LED will
turn off and WPS authentication will be stopped.
If the WPS authentication is successful, the WPS LED will bun steady to indicate a successful connection.
The wireless client is now connected to the secured wireless network of the modem router.
You can add more wireless clients without losing the connection to previously connected wireless clients.
If you want to add more wireless clients, you will need to repeat step A and B.
ENGLISH
42
7. Manually configure wireless security
This chapter describes how to manually secure the wireless connection of the C150APRA2. To prevent
unauthorized access to your network, securing your network is necessary.
Follow the steps below to manually configure the wireless security.
A. Login to the C150APRA2 as described in Chapter 5.2.
B. Wireless Wireless Securityleft menu.
ENGLISH
43
C. Security Mode
Note: IAuto (WPA or WPA2)
security level (WPA2), while maintaining backwards compatibility with clients that only support
WPA.
D. Select a WPA Encryption from the drop down list.
Note: ITKIP+AES
while maintaining backwards compatibility with clients that only support TKIP.
E. Enter a security key in the Pre-Shared Key
F. Click on Apply
Note: Remember or write down the security information you enter. You will need it when you want to
connect a wireless client to the C150APRA2.
You can now use the settings you have just set to connect your wireless client to the C150APRA2 as
described in Chapter 6.1 and Chapter 6.2.
ENGLISH
44
8. Setting up port forwarding rules
The Conceptronic C150APRA2 is equipped with a built-in firewall to prevent attacks from the Internet on
your network. This firewall automatically blocks all incoming traffic on unused ports. When a blocked port
is needed for a service or application (for example: a FTP or WEB server) you can create a port forwarding
rule in the configuration pages to forward the traffic.
Note: The Conceptronic C150APRA2 supports Universal Plug & Play (UPnP), which makes it possible for
UPnP compatible applications and devices such as game consoles to automatically open the ports
they need so no manual configuration is needed. However, UPnP also makes your network
environment more vulnerable for attacks. If you use applications which are using UPnP, you can
enable the UPnP option in the confAdvanced Network
Tools UPnP
Below you will find a list of some common used ports and their corresponding application:
Port Application Port Application
20 FTP data (FTP server)
21 FTP (FTP server)
22 SSH (Secure Shell)
23 Telnet
25 SMTP (Mail server outgoing)
80 HTTP (Web server)
110 POP3 (Mail server incoming)
2000 Remotely Anywhere
5800 VNC
5900 VNC
For more ports and their corresponding applications, see: http://portforward.com/cports.htm
Note: When using port forwarding rules, it is advised to configure the computer(s) with a fixed IP
address instead of a dynamic IP address.
Note: For detailed information about the port forwarding and DMZ options, see the Extended User
Manual (English only) on the Product CD-View Extended User Manual
the autorun menu.
A. Login to the C150APRA2 as described in Chapter 5.2.
B. Advanced
C. Port Forwardingft menu.
The Port forwarding configuration will be shown on your screen.
ENGLISH
45
Note: In the picture above you will see an example of a port forwarding configuration.
ENGLISH
46
D. Add
E. Select a preset service from Select a Service
Custom Server
F. Server IP Address
field.
G. Enter the ports which need External Port Start
External Port End
H. Select a prototol or your port forwarding rule froProtocolTCPUDP
Both
Note: If you do not know which protocol you need for your port forwardingBoth
will pass both TCP and UDP traffic to the configured IP address of your computer/server.
I. Internal
Port StartInternal Port End
J. Apply
The added rule is now visible in the port forwarding list.
To create more port forwarding rules, repeat steps D to J.
ENGLISH
47
9. Rebooting
When you change settings in the configuration of the modem router, the settings are directly applied and
active. However, it is advised to reboot the C150APRA2 after you made big and important changes in the
configuration to make sure that all settings are correctly applied.
A. Login to the C150APRA2 as described in Chapter 5.2.
B. Magement
C. System Management
D. Reboot
During the reboot, a progress bar will be shown on your screen.
Wait until the progress bar is completed before logging in again.
Your C150APRA2 is now ready to use!
Note: For detailed explanation of the features and settings available for the C150APRA2, please refer to
the Extended User Manual (English only) on the Product CD-View Extended User
Manual
ESPAÑOL
48
C150APRA2 de Conceptronic
Manual de usuario
Felicidades por la compra de su
módem-router ADSL inalámbrico de Conceptronic.
Este manual de usuario le ofrece una descripción paso a paso acerca de cómo instalar y utilizar el módem-
router ADSL inalámbrico de Conceptronic.
Si necesita más información o soporte técnico acerca de su producto, le recomendamos que visite nuestra
página web de Servicio y Soporte www.conceptronic.net/support y seleccione una de las siguientes
opciones:
FAQ : Base de datos con las preguntas más frecuentes (FAQ)
Descargas : Manuales, drivers, firmware y otras descargas
Contactar : Contactar con el servicio técnico de Conceptronic
Para información general sobre los productos de Conceptronic, visite la página web de Conceptronic
www.conceptronic.net.
La información de este manual está basada en Windows 7 y Vista, y las indicaciones podrían no coincidir
exactamente con su caso si utiliza un sistema operativo diferente.
Nota: Este manual de usuario describe únicamente los pasos básicos para el funcionamiento del módem-
router ADSL inalámbrico. Para más información acerca de las diferentes funciones del producto,
consulte el Manual de Usuario Ampliado (sólo en inglés) que encontrará en el CD-ROM del
producto.
Contenidos
1. Contenido del paquete
2. Descripción del módem-router ADSL
inalámbrico
2.1. Panel frontal
2.2. Panel posterior
3. Instalación del hardware
3.1. Puerto DSL (telefónico)
3.2. Puertos LAN
4. Configuración del ordenador
4.1. Configurar la dirección IP
4.2. Comprobar la conexión
5. Configuración del módem-router
5.1. Configuración de fábrica
5.2. Configuración vía web
5.3. Asistente de configuración
6. Conexión a la red inalámbrica
6.1. Conexión manual con Windows 7
6.2. Conexión manual con Windows Vista
6.3. Conexión automática utilizando WPS
7. Configuración manual de la protección
inalámbrica
8. Configuración de las reglas de redirección de
puertos
9. Reinicio
ESPAÑOL
49
1. Contenido del paquete
El paquete del módem-router ADSL inalámbrico de Conceptronic incluye los siguientes componentes:
Módem-router ADSL inalámbrico de Conceptronic (C150APRA2).
Antena para la conexión inalámbrica.
Fuente de alimentación (12 V CC, 800 mA)
Cable de red (LAN).
Cable telefónico RJ-11.
CD-ROM del producto.
Este manual de usuario en varios idiomas.
Tarjeta de garantía y folleto de declaración de conformidad de la CE.
2. Descripción del módem-router ADSL inalámbrico
2.1 Panel frontal
Descripción Estado Descripción del estado de los LED
A LED de encendido OFF Módem-router apagado.
ON - VERDE Encendido e inicializado de forma normal.
ON - ROJO El módem-router se está inicializando.
ON - PARPADEO Se está actualizando el firmware.
B LED de ADSL OFF Ha fallado la autocomprobación inicial.
ON PARPADEO El dispositivo está detectando señal DSL.
ON - FIJO Señal DSL detectada, autocomprobación inicial correcta.
C LED de Internet ON - ROJO No hay conexión DSL.
ON - VERDE Conexión a Internet disponible.
D LEDs de LAN OFF El puerto LAN no está conectado.
(1, 2, 3, 4) ON - FIJO Hay un dispositivo conectado al puerto LAN.
ON - PARPADEO Se están transfiriendo datos.
E LEDs de WLAN OFF LAN inalámbrica apagada.
ON - FIJO LAN inalámbrica activa y normal.
ON - PARPADEO Actividad en la red LAN inalámbrica (enviando o
recibiendo datos)
F LED de WPS OFF WPS (protección Wi-Fi) no activada.
ON - PARPADEO WPS activa, pueden añadirse nuevos clientes WLAN.
ON - FIJO Cliente WPS añadido correctamente.
ESPAÑOL
50
2.2 Panel posterior
Descripción Explicación
A Conexión de antena Para conectar la antena incluida al módem-router.
B Puerto DSL Para conectar la línea ADSL al módem-router.
C Puertos LAN (1-4) Para conectar el o los ordenadores o dispositivos de red al módem-
router.
D Conector de alimentación Para enchufar la fuente de alimentación al módem-router.
E Reset Reestablecer la configuración de fábrica (mantener pulsado).
F Botón WLAN / WPS Pulsación corta (1 segundo): Activar o desactivar el modo WiFi.
Pulsación larga (> 

G. Botón de encendido Para encender o apagar el módem-router.
ESPAÑOL
51
3. Instalación del hardware
Conecte la antena incluida al conector de antena [A] de la parte posterior del módem-router.
Conecte la fuente de alimentación al conector [D] de la parte posterior del módem-router
inalámbrico y a un enchufe de pared disponible.
Pulse el botón de encendido [G] de la parte posterior del módem-router.
El LED de encendido de la parte frontal del módem-router se encenderá y el dispositivo realizará su
inicialización.
3.1 Puerto DSL (telefónico)
Con la mayoría de proveedores de ADSL hay que colocar un separador (splitter) entre la línea de teléfono
y el módem ADSL para impedir que la línea ADSL interfiera con el servicio telefónico normal. La no
utilización del separador podría causar problemas de conexión o un mal rendimiento.
Nota: Con el C150APRA2 no se suministra ningún separador (splitter) para la conexión ADSL. Contacte
con su proveedor telefónico o de Internet para saber qué tipo de separador ADSL debe utilizar.
Normalmente, los puertos de conexión de un separador ADSL vienen indicados de la siguiente manera:
Line : Conectar este puerto al zócalo de pared.
ADSL : Conectar este puerto al módem-router.
Phone : Conectar este puerto al teléfono u otro dispositivo telefónico.
Asegúrese de que las líneas estén correctamente conectadas. Si no oye el tono de marcado con el
teléfono, compruebe las conexiones para asegurarse de que los cables estén correctamente fijados y
conectados a los puertos correctos.
Utilice un cable telefónico para conectar el módem-router de Conceptronic (B) al zócalo de línea
telefónica o al separador (splitter). El LED de ADSL se encenderá cuando se haya detectado señal ADSL.
Nota: Si el LED de ADSL de la parte frontal no se enciende, asegúrese de que:
- El módem-router inalámbrico está enchufado (el LED de encendido debería estar encendido).
- Existe señal ADSL en la línea telefónica.
- El LED de Internet sólo se encenderá en verde cuando se hayan introducido y se apliquen
correctamente los valores DSL y los datos de usuario correctos en la interfaz de configuración
vía web del módem-router.
3.2 Puertos LAN
Conecte el cable de red (LAN) a uno de los cuatro puertos LAN del panel posterior del módem-router
inalámbrico y a la tarjeta de red de su ordenador.
El LED LAN del puerto LAN utilizado se encenderá, indicando que el ordenador está conectado. (Su
ordenador tiene que estar encendido y la conexión LAN habilitada).
ESPAÑOL
52
4. Configuración del ordenador
4.1 Configurar la dirección IP
El C150APRA2 está equipado con un servidor DHCP incorporado. El servidor DHCP asignará
automáticamente una dirección IP a cada ordenador conectado que es configurado en el modo "Obtener
dirección IP automáticamente".
La mayoría de ordenadores están configurados de forma predeterminada para que obtengan la dirección IP
automáticamente. Si éste no fuera su caso, necesitará configurar su ordenador para que obtenga la
dirección IP automáticamente; para ello, siga las instrucciones siguientes. Estas instrucciones están
basadas en Windows Vista con Service Pack 1. Si su ordenador tiene un sistema operativo o una versión
diferente, los pasos a seguir podrían variar.
A. Inicio Ejecutar
B. NCPA.CPL
OK
Aparecerá la ventana de conexiones de red.
C. Conexión
de área local
dependiendo del tipo de conexión que utilice) y
Propiedades
B
C
B
ESPAÑOL
53
Aparecerá la ventana de propiedades de la conexión de área local.
D. Versión 4 del protocolo de
Internet (TCP/IPv4)
Propiedades
Aparecerá la ventana de propiedades de la Versión 4 del protocolo de Internet (TCP/IPv4).
E. Obtener la
dirección de IP automáticamente
OK
configuración.
F. OK
de la conexión de área local para
guardar la configuración.
D
D
E
E
ESPAÑOL
54
4.2 Comprobar la conexión
Haciendo uso de la línea de comandos de Windows puede verificar si ha recibido una dirección de IP
correcta en su conexión de área local inalámbrica o por cable. Este ejemplo está basado en Windows Vista
con Service Pack 1. Con Vista se necesitan derechos de administrador para poder realizar los pasos
explicados más abajo. Los derechos de administrador se pueden conseguir de la siguiente manera:
A. Inicio Todos los programas Accesorios
Línea de comandosUtilizar como administrador
Continuar
A continuación aparecerá la línea de comandos. Asegúrese de que en la barra de título ponga
Administrador: línea de comandosAdministrador
derechos de administrador y no podrá seguir con los pasos siguientes, y deberá realizar el paso A de
nuevo.
B. Introduzca el IPCONFIGENTER
Debería ver la información siguiente:
Dirección IPv4 : 192.168.0.xxx (donde xxx puede ser un número entre 100 y 199).
Máscara de subred : 255.255.255.0
Puerta de enlace predeterminada : 192.168.0.1
Si la información mostrada arriba concuerda con su configuración, puede continuar con la configuración
del dispositivo en el apartado 5.
Si la información mostrada arriba no concuerda con su configuración (por ejemplo, si su dirección IP es
169.254.xxx.xxx), pruebe las opciones siguientes:
1. Desconecte la corriente del dispositivo y vuelva a conectarla.
2. Vuelva a conectar el cable LAN al dispositivo y al ordenador.
3. Renueve la dirección IP de su ordenador con los comandos siguientes:
- IPCONFIG /RELEASEe la dirección IP incorrecta.
- IPCONFIG /RENEW
B
ESPAÑOL
55

dispositivo vuelva a la configuracReset
dispositivo.
Reset
Cuando el LED de estado esté activo de nuevo, repita el paso B para renovar la dirección IP.
Nota: Si el problema continúa, compruebe que todos los cables estén correctamente conectados. El
puerto ADSL debe estar conectado a la línea ADSL y al puerto LAN del ordenador.
3
3
ESPAÑOL
56
5. Configuración del módem-router
Este apartado describe cómo configurar el C150APRA2 mediante el asistente de configuración rápida
incorporado. Una vez completados los pasos de este apartado, su módem-router ya estará configurado
para una conexión ADSL y listo para conectarse a Internet.
5.1 Configuración de fábrica
El C150APRA2 está preconfigurado con varios parámetros. A continuación se detallan los parámetros
preconfigurados:
Dirección IP : 192.168.0.1 (Servidor DHCP para clientes LAN/WLAN habilitado)
Nombre de usuario : admin (seleccione este usuario)
Contraseña : admin (en minúsculas)
SSID inalámbrica : C150APRA2
Canal inalámbrico : Canal 6
Protección inalámbrica : WPA2
UPnP : desactivado (puede activarse cuando se haya configurado la conexión a
Internet)
Cuando cambie la configuración del C150APRA2, la nueva configuración quedará guardada en la memoria
del módem-

5.2 Configuración vía web
La configuración del C150APRA2 se realiza vía web. Necesitará utilizar un navegador de Internet para
realizar la configuración del dispositivo.
Nota: Para la configuración del módem-router se recomienda utilizar una conexión con cable LAN en vez
de una conexión inalámbrica.
A. Inicie su navegador de Internet (como Internet Explorer, Firefox, Safari o Chrome).
B. Introduzca la dirección IP del dispositivo en la barra de direcciones de su navegador de Internet
(predeterminado: http://192.168.0.1/).
C. En primer lugar aparecerá la ventana de acceso, en la que se le pedirá que introduzca un nombre
admin
la contraseña de administrador adminLogin
configuración vía web.
ESPAÑOL
57
Si el nombre de usuario y la contraseña son correctos, el módem-Overview
(Resumen):
Overview la configuración y el mantenimiento del C150APRA2.
ESPAÑOL
58
5.3 Asistente de configuración
Puede configurar la conexión a Internet del C150APRA2 utilizando el asistente incorporado. Este asistente
le ayudará a realizar la configuración paso a paso.
Nota: Antes de iniciar la configuración con el asistente, asegúrese de que tiene a mano toda la
información acerca de su configuración de Internet. (Por ejemplo: información de su cuenta, tipo
de conexión, etc.)
A. Quick StartInicio rápido) del menú superior de la página de configuración
vía web.
B. Setup
WizardAsistente de
configuración).
C. La pantalla de bienvenida muestra
cuatro pasos del asistente. Haga clic
Next (Siguiente) para
continuar.
D. El módem-router detectará la fecha
y la hora correctas cuando se
conecte a Internet. Ello sólo se
utilizará para el inicio de sesión de
configuración. Seleccione la zona
horaria y las fechas de inicio y
finalización del horario de verano.
Next
(Siguiente).
ESPAÑOL
59
E. Seleccione su país y su proveedor de
servicios de Internet. Se aplicarán
los parámetros introducidos para la
conexión a Internet. Podrá
modificarlos posteriormente.
Si utiliza una conexión a Internet
PPPOE o PPPOA, utilice el nombre
de usuario y la contraseña que le
haya proporcionado su proveedor de
servicios de Internet.
Next
(Siguiente).
F. Puede activar o desactivar la
conexión inalámbrica (activada por
defecto). El módem-router se
mostrará con la SSID C150APRA2
pero puede ocultarla. Está
configurado con una clave de
seguridad WPA2-PSK única.
Nota: En la parte inferior del
módem-router encontrará la
clave de seguridad
predeterminada.
Puede conservar la clave que
aparece en la interfaz del usuario o
cambiarla a una clave
precompartida de su elección.
Next
(Siguiente).
ESPAÑOL
60
G. Cuando haya completado la
configuración de red LAN
Setup
SummaryResumen de
configuración) con los parámetros
configurados.
Cuando todo esté correcto, haga
ApplyAplicar).
Su dispositivo se encuentra ya
configurado y la conexión a Internet
lista para ser utilizada.
ESPAÑOL
61
6. Conexión a la red inalámbrica
Puede conectarse de dos formas distintas sin cables a la red inalámbrica del módem-router inalámbrico:
- Manualmente.
- Automáticamente utilizando la función WPS.
Casi todas las marcas o tipos de tarjetas inalámbricas utilizan aplicaciones de cliente distintas. Consulte la
información del manual de su tarjeta de red inalámbrica acerca de cómo crear una conexión con una red
inalámbrica.
6.1 Conexión manual con Windows 7
Conectarse a una red
A. Red
de tareas para ver la lista de conexiones
a redes inalámbricas disponibles.
B. C150APRA2
Conectar
De forma predeterminada estará
seleccionada la opción "Conectarse
automáticamente". Esto hace que la
conexión se realice automáticamente
cada vez que encienda el ordenador. Si
no desea que esto ocurra, desactive esta
opción antes de hacer clic en
Conectar
¡NOTA IMPORTANTE!
El router inalámbrico está protegido con cifrado WPA-PSK/WPA2-PSK (modo mixto) de forma
predeterminada. La frase secreta WPA única puede encontrarse en la etiqueta situada en la base
del módem-router.
ESPAÑOL
62
C. Introduzca la frase secreta WPA
predeterminada (que encontrará en la
parte inferior del módem-router
Clave de
seguridadOK
D. El cliente iniciará ahora su conexión a la
red inalámbrica.
E. Para comprobar el estado de la conexión
inalámbrica, puede hacer clic en el icono
Redá ver a
qué red está actualmente conectado, el
tipo de acceso y el nivel de la señal de
conexión.
ESPAÑOL
63
6.2 Conexión manual con Windows Vista
Conectarse a una red
Service Pack 1.
A. Haga clic en el icono de red de la
bandeja del sistema y haga clic
en “Hay disponibles redes
inalámbricas”.
B. C150APRA2
de la lisa y haga clic en
Conectar
C. Introduzca la frase secreta WPA
predeterminada (que encontrará
en la parte inferior del
Clave
o frase de seguridad
Conectar
ESPAÑOL
64
D. Una vez se ha establecido la
conexión, puede guardar la red y
hacer que se inicie
automáticamente cada vez que
encienda el ordenador. Haga clic
Cerrar
asistente de conexión.
E. Para comprobar el estado de la
conexión inalámbrica, puede
hacer clic en el icono de red de
la bandeja del sistema. Podrá ver
a qué red está actualmente
conectado, el tipo de acceso y el
nivel de la señal de conexión.
ESPAÑOL
65
6.3 Conexión automática utilizando WPS
El módem-router es compatible con la función WPS (configuración Wi-Fi protegida). La función WPS es un
procedimiento para establecer una red inalámbrica de forma fácil y segura. Con esta función podrá
configurar y proteger su red inalámbrica siguiendo tan sólo unos pasos muy sencillos.
Nota: Para utilizar la función WPS con el módem-router, deberá tener un cliente inalámbrico
compatible con dicha función. Si tiene uno o más clientes inalámbricos que no son compatibles
con la función WPS, se recomienda que se conecte al módem-router manualmente utilizando la
clave WPA preconfigurada que aparece en la base del módem-router. Consulte el apartado 6.1 ó
6.2 para más información sobre cómo conectarse manualmente a la red inalámbrica.
Nota: Si desea más información (general o técnica) sobre la función WPS, puede visitar el sitio web
siguiente:
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
-router
con sólo pulsar un botón en cada dispositivo.

establecer una conexión entre el módem-router y el cliente inalámbrico.
Algunos clientes inalámbricos utilizan un botón real para activar la tecnología Push Button para WPS,
mientras que otros emplean un botón virtual basado en software.
Siga los pasos s
A. Pulse el botón WPS en la parte posterior del módem-router; el LED WPS empezará a parpadear, lo
que indicará que se ha iniciado la autenticación WPS.
B. Pulse el botón WPS del cliente inalámbrico. Puede tratarse de un botón real o de un botón virtual
en el software del cliente inalámbrico.
Nota: El módem-router mantendrá activa la autenticación WPS durante 120 segundos. Durante este
proceso, el LED WPS parpadeará. Si no hay conexión WPS durante estos 120 segundos, el LED se
apagará y la autenticación WPS se detendrá.
Si la autenticación WPS se realiza de forma satisfactoria, el LED WPS se encenderá y se quedará
encendido, indicando que se ha establecido la conexión.
El cliente inalámbrico se encuentra ahora conectado a la red inalámbrica protegida del módem-router.
Puede añadir más clientes inalámbricos sin perder la conexión con los clientes inalámbricos anteriores. Si
desea añadir más clientes inalámbricos, deberá repetir los pasos A y B.
ESPAÑOL
66
7. Configurar la protección inalámbrica manualmente
Este apartado describe cómo proteger la conexión inalámbrica al C150APRA2 de forma manual. Para
impedir accesos no autorizados a su red, es necesario protegerla.
Siga los pasos siguientes para configurar manualmente la protección inalámbrica.
A. Entre en la página de configuración del C150APRA2 tal como se describe en el apartado 5.2.
B. WirelessInalámbricoWireless SecurityProtección inalámbrica) en
el menú de la izquierda.
ESPAÑOL
67
C. Security Mode(Tipo de protección), escoja un tipo de protección de la lista desplegable.
Nota: Auto (WPA or WPA2)
nivel más alto de seguridad (WPA2), al mismo tiempo que guarda compatibilidad con clientes que
sólo son compatibles con WPA.
D. WPA Encryption(Cifrado WPA), escoja un tipo de cifrado WPA de la lista desplegable.
Nota: TKIP+AES nivel más alto de cifrado (AES), al
mismo tiempo que guarda compatibilidad con clientes que sólo son compatibles con TKIP.
E. Pre-Shared KeyClave precompartida).
F. ApplyAplicar) para guardar los cambios en la configuración.
Nota: Recuerde o anote la información de seguridad inalámbrica que introduzca. La necesitará cuando
desee conectar un cliente inalámbrico al C150APRA2.
Ahora puede utilizar los parámetros que acaba de configurar para conectar su cliente inalámbrico al
C150APRA2 tal como se describe en el apartado 6.1 ó 6.2.
ESPAÑOL
68
8. Configuración de las reglas de redirección de puertos
El C150APRA2 de Conceptronic está equipado con un cortafuegos para impedir ataques a su red desde
Internet. Este cortafuegos bloqueará automáticamente todo tráfico entrante por puertos no utilizados.
Cuando un puerto bloqueado se necesite para algún servicio o aplicación (por ejemplo: un servidor FTP o
un servidor web), puede crear una regla de redirección de puertos en la página de configuración para
redirigir el tráfico.
Nota: El C150APRA2 de Conceptronic es compatible con Plug & Play Universal (UPnP), lo que permite
que las aplicaciones y dispositivos (como por ejemplo videoconsolas) compatibles con UPnP abran
automáticamente los puertos que necesitan, de forma que no sea necesaria ninguna configuración
manual. No obstante, el sistema UPnP hace que su entorno de red sea más vulnerable a los
posibles ataques. Si utiliza aplicaciones que utilicen UPnP, puede habilitar la opción UPnP en la
AdvancedAvanzado) Network ToolsHerramientas de
red) UPnP
A continuación encontrará una lista de los puertos más utilizados y sus correspondientes aplicaciones:
Puerto Aplicación Puerto Aplicación
20 Datos FTP (servidor FTP)
21 FTP (servidor FTP)
22 SSH (Secure Shell)
23 Telnet
25 SMTP (Servidor de correo saliente)
80 HTTP (servidor web)
110 POP3 (Servidor de correo entrante)
2000 Remotely Anywhere
5800 VNC
5900 VNC
Para información sobre otros puertos y sus correspondientes aplicaciones, visite:
http://portforward.com/cports.htm.
Nota: Cuando utilice reglas de redirección de puertos, se recomienda configurar el ordenador u
ordenadores para que obtengan una IP fija en vez de una IP dinámica.
Nota: Para información más detallada acerca de la redirección de puertos y las opciones de DMZ,
consulte el Manual de Usuario Ampliado (sólo en inglés) que encontrará en el CR-ROM del
prodVer el Manual de Usuario Ampliado
A. Entre en la página de configuración del C150APRA2 tal como se describe en el apartado 5.2.
B. AdvancedAvanzado) en el menú superior.
C. Port ForwardingRedirección de puertos) en el menú de la izquierda.
Aparecerá la pantalla de configuración de la redirección de puertos.
ESPAÑOL
69
Nota: En la imagen anterior, verá un ejemplo de configuración de redirección de puertos.
ESPAÑOL
70
D. Addadir) para añadir una nueva regla de redirección de puertos.
E. Select a ServiceSeleccionar un servicio), seleccione un servicio predeterminado de la lista
desplegable, o introduzca un nuevo nombre de servicio para la regla de redirección en el campo
Custom ServerServidor personalizado).
F. Introduzca la dirección IP del ordenador que utilizará la regla de redirección de puertos en el
Server IP AddressDirección IP del servidor).
G. Introduzca los puertos que desee hacer accesibles desde Internet External Port
StartPuerto externo inicialExternal Port EndPuerto externo final).
H. ProtocolTCP
UDPBothAmbos).
Nota: Si no sabe qué prBothAmbos). Esta
opción redireccionará tanto el trafico TCP como el UDP hacia la dirección IP configurada de su
ordenador o servidor.
I. Introduzca los puertos de su ordenador que deban estar accesibles para la red local en los campos
Internal Port StartPuerto interno inicialInternal Port EndPuerto interno final).
J. ApplyAplicar) para guardar la regla de redirección de puertos.
La regla añadida puede verse ahora en la lista de redirección de puertos.
Para crear más reglas de redirección de puertos, repita los pasos de D a J.
ESPAÑOL
71
9. Reinicio
Cuando usted cambia cualquier parámetro de configuración del módem-router, la nueva configuración se
aplica y queda activada directamente. No obstante, es recomendable reiniciar el C150APRA2 después de
haber hecho algún cambio importante en la configuración para asegurarse de que la nueva configuración
se aplique correctamente.
A. Entre en la página de configuración del C150APRA2 tal como se describe en el apartado 5.2.
B. MagementGestión) en el menú superior.
C. System ManagementGestión del sistema) en el menú de la izquierda.
D. RebootReiniciar) para reiniciar el C150APRA2.
Durante el reinicio, en la pantalla aparecerá una barra de progresión.
Espere hasta que la barra de progresión haya llegado al final antes de iniciar sesión de nuevo.
¡Su C150APRA2 ya está listo para ser utilizado!
Nota: Para información más detallada acerca de las funciones y configuraciones disponibles del
C150APRA2, consulte el Manual de Usuario Ampliado (sólo en inglés) que encontrará en el CR-ROM
View Extended User ManualVer el Manual de Usuario Ampliado) en
el menú autoejecutable.
DEUTSCH
72
Conceptronic C150APRA2
Benutzerhandbuch
Wir gratulieren Ihnen zum Kauf Ihres
Conceptronic Wireless ADSL Modem-Routers.
In dieser Bedienungsanleitung wird Ihnen Schritt für Schritt gezeigt, wie der Wireless ADSL Modem-Router
von Conceptronic installiert und verwendet wird.
Wenn Sie weitere Informationen oder Support für Ihr Produkt benötigen, besuchen Sie unsere Service &
Support-Webseite www.conceptronic.net/support und wählen Sie eine der folgenden Optionen:
FAQ : Datenbank mit den häufig gestellten Fragen
Downloads : Handbücher, Treiber, Firmware und weitere Downloads
Kontakt : Kontakt für den Conceptronic-Support
Allgemeine Informationen über Conceptronic-Produkte finden Sie auf der Conceptronic-Webseite unter
www.conceptronic.net.
Die Informationen in dieser Schnellinstallationsanleitung basieren auf Windows 7 und Vista und treffen
möglicherweise nicht vollständig zu, wenn Sie ein anderes Betriebssystem auf Ihrem Computer verwenden.
Hinweis: In diesem Benutzerhandbuch sind lediglich die Grundschritte für die erste Inbetriebnahme des
Wireless ADSL Modem-Routers beschrieben. Weitere Informationen über die verschiedenen
Funktionen des ADSL Wireless Modem-Routers finden Sie im erweiterten Benutzerhandbuch auf
der im Lieferumfang enthaltenen CD-ROM (nur Englisch).
Inhaltsverzeichnis
1. Packungsinhalt
2. Erläuterungen zum Wireless ADSL Modem-
Router
2.1. Vorderseite
2.2. Rückseite
3. Hardwareinstallation
3.1. DSL (Telefon)-Port
3.2. LAN-Port(s)
4. Konfiguration des Computers
4.1. Konfiguration der IP-Adresse
4.2. Überprüfen der Verbindung
5. Modem-Router-Konfiguration
5.1. Werkseinstellungen
5.2. Webbasierte Konfiguration
5.3. Einrichtungsassistent
6. Verbindung mit dem Drahtlosnetzwerk
6.1. Manuelle Verbindung unter Windows 7
6.2. Manuelle Verbindung unter Windows Vista
6.3. Automatische Verbindung mit WPS
7. Manuelle Konfiguration der Wireless-Sicherheit
8. Einrichten von Portweiterleitungsregeln
9. Neustart
DEUTSCH
73
1. Packungsinhalt
In der Verpackung des Wireless ADSL Modem-Routers von Conceptronic ist Folgendes enthalten:
Conceptronic Wireless ADSL Modem-Router (C150APRA2)
Antenne für Wireless-Verbindungen
Netzteil 12V Gleichstrom 800mA
Netzwerk (LAN)-Kabel
RJ11-Telefonkabel
Produkt-CD-ROM
Dieses mehrsprachige Benutzerhandbuch
Garantiekarte und Broschüre mit CE-Erklärung
2. Erläuterungen zum Wireless ADSL Modem-Router
2.1 Vorderseite
Nr. Beschreibung Status Status-Erklärung
A Power-LED AUS Stromversorgung ausgeschaltet
EIN - GRÜN Stromversorgung eingeschaltet; normale Initialisierung
EIN - ROT Gerät am Initialisieren
EIN - BLINKEND Firmware-Upgrade im Gange
B ADSL-LED AUS Initialer Selbsttest fehlgeschlagen
EIN - BLINKEND Gerät erkennt DSL-Signal
EIN - DAUERLICHT DSL-Signal erkannt, Selbsttest erfolgreich
C Internet-LED EIN - Rot Keine DSL-Verbindung
EIN - Grün Internetverbindung vorhanden
D LAN-LEDs AUS LAN-Port ist nicht angeschlossen
(1, 2, 3, 4) EIN - DAUERLICHT Ein Gerät ist am LAN-Port angeschlossen
EIN - BLINKEND Daten werden übertragen
E WLAN-LEDs AUS Wireless LAN ist ausgeschaltet
EIN - DAUERLICHT Wireless LAN ist aktiv und normal
EIN - BLINKEND Wireless LAN-Aktivität (Daten werden gesendet oder
empfangen)
F WPS-LED AUS WPS (Wi-Fi Protected Setup) nicht aktiv
EIN - BLINKEND WPS aktiv, neue WLAN-Clients können hinzugefügt werden
EIN - DAUERLICHT WPS-Client erfolgreich hinzugefügt
DEUTSCH
74
2.2 Rückseite
Nr. Beschreibung Erklärung
A Antennenanschluss Für den Anschluss der im Lieferumfang enthaltenen Antenne an das Gerät
B DSL-Port Für den Anschluss der ADSL-Leitung an das Gerät
C LAN-Ports (1 4) Für den Anschluss von Computernetzwerkgeräten an das Gerät
D Stromanschluss Anschluss für die Stromversorgung des Geräts
E Reset Für das Zurücksetzen auf die Werkseinstellungen (gedrückt halten)
F WLAN -/WPS-Taste Kurz drücken (1 Sekunde) : Zum Ein-/Ausschalten von WiFi
Lang drücken (> 3 Sekunde) : Startet die WPS-Knopfdruck-Konfiguration
G Power-Taste Zum Ein-/Ausschalten des Geräts
DEUTSCH
75
3. Hardwareinstallation
Schließen Sie die im Lieferumfang enthaltene Antenne am Antennenanschluss [A] auf der Rückseite des
Geräts an.
Schließen Sie das Netzteil am Stromanschluss [D] auf der Rückseite des Geräts und an die
Stromversorgung an.
Drücken Sie die Power-Taste [G] auf der Rückseite des Geräts.
Daraufhin leuchtet die Power-LED-Anzeige auf der Vorderseite des Geräts und das Gerät fährt das System
hoch.
3.1 DSL (Telefon)-Port
Bei den meisten ADSL-Anbietern ist ein Splitter zwischen der Telefonleitung und dem ADSL-Modem
erforderlich, der die ADSL-Leitung von der normalen Telefonleitung trennt. Wenn kein solcher Splitter
verwendet wird, könnte dies zu Verbindungsproblemen oder Störungen führen.
Hinweis: Der Splitter für die ADSL-Verbindung ist nicht im Lieferumfang des C150APRA2 enthalten. Den
korrekten ADSL-Splitter erhalten Sie über Ihren Telefon- oder Internetdienstanbieter.
Die Anschlüsse für einen ADSL-Splitter sind üblicherweise wie folgt gekennzeichnet:
Line [Leitung] : Anschluss an die Wandbuchse
ADSL : Anschluss an den Router
Telefon : Anschluss an das Telefon oder andere Telefongeräte
Stellen Sie sicher, dass die Leitungen korrekt angeschlossen sind. Wenn Sie den Wählton des Telefons nicht
hören, überprüfen Sie die Verbindungen um sicherzustellen, dass die Kabel richtig befestigt und am
korrekten Port angeschlossen sind.
Schließen Sie den Conceptronic Wireless ADSL Modem-Router (B) mit einem Telefonkabel an die analoge
Telefonleitung (bzw. den Splitter) an. Die ADSL-LED-Anzeige leuchtet, wenn ein ADSL-Signal erkannt wird.
Hinweis: Wenn die ADSL-LED-Anzeige auf der Vorderseite nicht leuchtet, vergewissern Sie sich, dass:
- der Wireless ADSL Modem/Router eingeschaltet ist (die Power-LED-Anzeige sollte leuchten),
- ein ADSL-Signal auf der Leitung vorhanden ist.
- Die Internet-LED-Anzeige leuchtet erst dann grün, wenn die korrekten DSL- und
Benutzerkonteneinstellungen auf der Webbenutzeroberfläche des ADSL-Modem/Routers
vorgenommen wurden.
3.2 LAN-Port(s)
Schließen Sie das Netzwerk (LAN)-Kabel an einen der vier LAN-Ports auf der Rückseite des Wireless ADSL
Modem-Routers und an die Netzwerkkarte Ihres Computers an.
Die LAN-LED-Anzeige des verwendeten LAN-Ports schaltet ein und zeigt damit an, dass der Computer
angeschlossen ist. (Ihr Computer muss eingeschaltet und die LAN-Verbindung muss aktiviert sein.)
DEUTSCH
76
4. Konfiguration des Computers
4.1 Konfiguration der IP-Adresse
Der C150APRA2 ist mit einem eingebauten DHCP-Server ausgerüstet. Der DHCP-Server weist automatisch
jedem angeschlossenen Computer eine IP-Adresse zu, wenn dieser auf „IP-Adresse automatisch
beziehen“ eingestellt ist.
Die meisten Computer sind so konfiguriert, dass sie automatisch eine IP-Adresse beziehen. Sollte dies bei
Ihnen nicht der Fall sein, müssen Sie Ihren Computer so konfigurieren, dass er automatisch eine IP-Adresse
bezieht. Befolgen Sie dazu untenstehende Anweisungen. Diese Anweisungen basieren auf Windows Vista
mit Service Pack 1. Wenn Ihr Computer eine andere Version oder ein anderes Betriebssystem hat, können
die auszuführenden Schritte von den im Folgenden beschriebenen abweichen.
A. Start Ausführen
B. NCPA.CPL
OK
Netzwerkverbindungen“.
C. LAN-Verbindung
(verkabelt oder kabellos, je nach verwendeter
Eigenschaften
B
C
B
DEUTSCH
77
Eigenschaften von LAN-Verbindung“.
D. Wählen Sie das „Internetprotokoll
Version 4 (TCP/IPv4)“ und klicken Sie
auf „Eigenschaften“.
Eigenschaften von Internetprotokoll Version 4 (TCP/IPv4)
E. Aktivieren Sie das Feld „IP-Adresse
automatisch beziehen“ und klicken Sie
auf „OK“, um die Einstellungen zu
speichern.
F. Eigenschaften
von LAN-Verbindung“ auf „OK“, um die
Einstellungen zu speichern.
D
D
E
E
DEUTSCH
78
4.2 Überprüfen der Verbindung
Über die Eingabeaufforderung von Windows können Sie überprüfen, ob Sie für Ihre (verkabelte oder
kabellose) LAN-Verbindung eine korrekte IP-Adresse erhalten haben. Dieses Beispiel basiert auf Windows
Vista mit Service Pack 1. Sie müssen über Administratorrechte verfügen, um die folgenden Schritte
durchführen zu können. Diese Administratorrechte können Sie wie folgt erlangen.
A. Klicken Sie auf „Start „Alle Programme” „Zubehör”, rechtsklicken Sie auf
EingabeaufforderungAls Administrator ausführen
WarnmeldWeiter
Es erscheint die Eingabeaufforderung. Stellen Sie sicher, dass die Titelleiste der Eingabeaufforderung den
 erwähnt ist, haben Sie
die erforderlichen Administratorrechte nicht und müssen erneut den Schritt A durchführen.
B. IPCONFIGENTER-Taste.
Es sollten die folgenden Informationen angezeigt werden:
IPv4-Adresse : 192.168.0.xxx (wobei xxx eine Zahl zwischen 100 ~ 199 sein kann).
Subnetzmaske : 255.255.255.0
Standardgateway : 192.168.0.1
Wenn Ihre Konfiguration mit obigen Informationen übereinstimmt, können Sie weitergehen zu Kapitel 5,
um mit der Konfiguration des Geräts fortzufahren.
Wenn Ihre Konfiguration nicht mit obigen Informationen übereinstimmt (z.B. wenn Ihre IP-Adresse
169.254.xxx.xxx lautet), gehen Sie bitte folgendermaßen vor:
1. Schalten Sie das Gerät aus und wieder ein.
2. Trennen Sie das LAN-Kabel vom Gerät und von Ihrem Computer und schließen Sie es erneut an.
3. Erneuern Sie die IP-Adresse Ihres Computers mit den folgenden Befehlen:
- IPCONFIG /RELEASE-Adresse zu löschen.
- IPCONFIG /RENEW-Adresse vom Gerät zu erhalten.
B
DEUTSCH
79
Wenn diese Maßnahmen das Problem mit der IP-Adresse nicht lösen, können Sie durch Betätigen der Reset-
Taste auf der Rückseite des Geräts das Gerät auf die Werkseinstellungen zurücksetzen.
Drücken Sie die Reset-Taste und halten Sie diese während + / - 15 Sekunden gedrückt, um die
Werkseinstellungen zu laden. Sobald die Status-LED-Anzeige wieder aktiv ist, wiederholen Sie den Schritt
B, um die IP-Adresse zu erneuern.
Hinweis: Wenn das Problem weiterhin besteht, überprüfen Sie, ob alle Kabel korrekt angeschlossen sind.
Der ADSL-Port sollte mit der ADSL-Leitung und der LAN-Port mit dem Computer verbunden sein.
3
3
DEUTSCH
80
5. Modem-Router-Konfiguration
In diesem Kapitel wird die Konfiguration des C150APRA2 mit dem integrierten Schnellstartassistenten
beschrieben. Nachdem alle Schritte in diesem Kapitel durchgeführt wurden, ist Ihr Router für eine ADSL-
Verbindung konfiguriert und kann eine Verbindung zum Internet herstellen.
5.1 Werkseinstellungen
Der C150APRA2 ist mit einigen Einstellungen vorkonfiguriert. Dies sind:
IP-Adresse : 192.168.0.1 (DHCP-Server für LAN/WLAN Clients aktiviert)
Benutzername : admin (diesen Benutzer auswählen)
Passwort : admin (Kleinbuchstaben)
Wireless SSID : C150APRA2
Wireless-Kanal : Kanal 6
Wireless-Sicherheit : WPA2
UPnP : deaktiviert (kann aktiviert werden, sobald die Internetverbindung
konfiguriert ist)
Wenn Sie Einstellungen in der Konfiguration des C150APRA2 geändert haben, werden diese im Router
gespeichert. Um die Werkseinstellungen wiederherzustellen, drücken Sie die Reset-Taste auf der
Rückseite des Geräts und halten Sie diese während + / - 15 Sekunden gedrückt.
5.2 Webbasierte Konfiguration
Die Konfiguration des C150APRA2 ist webbasierend. Für die Konfiguration des Geräts benötigen Sie einen
Webbrowser.
Hinweis: Wir empfehlen, für die Konfiguration des Routers eine LAN-Kabelverbindung statt einer
drahtlosen Verbindung zum Gerät zu verwenden.
A. Starten Sie Ihren Webbrowser (z.B. Internet Explorer, FireFox, Safari oder Chrome).
B. Geben Sie die IP-Adresse des Geräts in das Adressfeld Ihres Webbrowsers ein (standardmäßig:
http://192.168.0.1/).
C. Es erscheint ein Anmeldefenster, das Sie zur Eingabe eines Benutzernamens und Passworts
admin Dropdown-Liste, geben Sie das Passwort für
admin’Login
Konfiguration einzugeben.
DEUTSCH
81
Überblicks- an:
Überblicks-Seite enthält ein Schnellmenü für die Konfiguration und den Unterhalt des C150APRA2.
DEUTSCH
82
5.3 Einrichtungsassistent
Sie können die Internetverbindung des C150APRA2 über den integrierten Assistenten einrichten. Dieser
Assistent zeigt Ihnen Schritt für Schritt, wie die Einstellungen konfiguriert werden müssen.
Hinweis: Bevor Sie die Konfiguration mithilfe des Schnellstartassistenten beginnen, stellen Sie sicher,
dass Sie alle Informationen über Ihre Interneteinstellungen zur Hand haben. (Zum Beispiel:
Kontoinformationen, Verbindungsart usw.)
A. Quickstart [Schnellstart]-
Konfiguration.
B. Klicken Sie auf die Schaltfläche
Setup Wizard

C. Im Willkommensfenster werden die
vier Schritte des Assistenten
Next
[Weiter].
D. Das ADSL-Modem übernimmt
automatisch das korrekte Datum
und die korrekte Uhrzeit, wenn es
mit dem Internet verbunden ist.
Diese werden lediglich zu
Protokollierungszwecken
verwendet. Sie können die Zeitzone
und Sommerzeitdaten auswählen.
Next
[Weiter]".
DEUTSCH
83
E. Wählen Sie das Land und den
Internetdienstanbieter aus. Die
korrekten Einstellungen für Ihre
Internetverbindung werden
übernommen. Diese können später
geändert werden.
Verwenden Sie bei PPPOE- oder
PPPOA-Internetverbindungen den
Benutzernamen und das Passwort,
die Sie von Ihrem
Internetdienstanbieter erhalten
haben.
Next
[Weiter]".
F. Sie können Ihr Drahtlosnetzwerk
aktivieren oder deaktivieren
(standardmäßig ist es aktiviert). Der
C150APRA2 wird mit der SSID
C150APRA2
können die SSID ausblenden. Der
C150APRA2 ist mit einem
geräteeigenen WPA2-PSK-
Sicherheitsschlüssel vorkonfiguriert.
Hinweis: Den vorkonfigurierten
Sicherheitsschlüssel
finden Sie auf der
Unterseite des Modem-
Routers.
Sie können den Schlüssel auf der
Benutzeroberfläche beibehalten
oder zu einem Pre-Shared-Schlüssel
abändern, wenn Sie möchten.
Next
[Weiter]".
DEUTSCH
84
G. Nach dem Fertigstellen der
Wireless-LAN-Konfiguration wird das
Setup Summary
Überblick über die Einstellungen
angezeigt.
Wenn Sie die Einstellungen
übernehmen möchten, klicken Sie
Apply [Übernehmen]".
Damit ist Ihr Gerät konfiguriert und
die Internetverbindung
betriebsbereit.
DEUTSCH
85
6. Verbindung mit dem Drahtlosnetzwerk
Es gibt zwei Möglichkeiten der Drahtlosverbindung mit dem Wireless-Router-Netzwerk:
- Manuell.
- Automatisch mithilfe der WPS-Funktion.
Für die verschiedenen Marken/Arten von Wireless-Karten werden unterschiedliche Client-Anwendungen
verwendet. Informationen über das Erstellen einer Verbindung mit einem Drahtlosnetzwerk finden Sie im
Handbuch Ihrer Wireless-Netzwerkkarte.
6.1 Manuelle Verbindung unter Windows 7
Connect to a Network [Verbindung mit einem

A. Netzwerk’-Symbol in
der Kontrollleiste. Daraufhin wird die
Liste der verfügbaren drahtlosen
Netzwerkverbindungen angezeigt.
B. C150APRA2
aus der Liste aus und klicken Sie auf
Connect 
Connect
automatically 
ausgewählt. Damit ist sichergestellt, dass
die Verbindung immer, wenn Sie Ihren
Computer einschalten, gestartet wird.
Wenn Sie dies nicht möchten, können Sie
diese Option deaktivieren, bevor Sie auf
Connect 
! WICHTIGER HINWEIS !
Der Wireless-Router ist standardmäßig mit WPA-PSK/WPA2-PSK (gemischter Modus)-
Verschlüsselung geschützt.
Die geräteeigene WPA-Passphrase findet sich auf dem Aufkleber auf Ihrem Modem-Router.
DEUTSCH
86
C. Geben Sie die Standard-WPA-Passphrase
(diese findet sich auf der Unterseite des
Wireless-Security key

OK
D. Daraufhin beginnt der Client, die
Verbindung mit dem Drahtlosnetzwerk
herzustellen.
E. Zur Überprüfung des Status der
drahtlosen Verbindung können Sie auf
Netzwerk’-Symbol in der
Kontrollleiste klicken. Daraufhin wird
angezeigt, mit welchem Netzwerk
gegenwärtig eine Verbindung besteht,
welchen Zugriff Sie haben und welche
Signalstärke die Verbindung hat.
DEUTSCH
87
6.2 Manuelle Verbindung unter Windows Vista
Connect to a Network [Verbindung mit einem

A. Netzwerk’-
Symbol in der Kontrollleiste und
Wireless networks are
available [Verfügbare
Drahtlosnetzwerke]
B. Wählen Sie das Netzwerk
C150APRA2
Connect

C. Geben Sie die Standard-WPA-
Passphrase (diese findet sich auf
der Unterseite des C150APRA2)
Security key or
Passphrase [Sicherheitsschlüssel

Connect 
DEUTSCH
88
D. Sobald die Verbindung hergestellt
wurde, können Sie die Optionen
Save this network [Dieses
Netzwerk speichern]
Start this connection
automatically [Diese Verbindung
automatisch starten]
aktivieren. Klicken Sie auf „Close

Verbindungsassistenten zu
schließen.
E. Zur Überprüfung des Status der
drahtlosen Verbindung können Sie
Netzwerk’-Symbol in der
Kontrollleiste klicken. Daraufhin
wird angezeigt, mit welchem
Netzwerk gegenwärtig eine
Verbindung besteht, welchen
Zugriff Sie haben und welche
Signalstärke die Verbindung hat.
DEUTSCH
89
6.3 Automatische Verbindung mit WPS
Der C150APRA2 unterstützt WPS (Wi-Fi Protected Setup). WPS ist ein Standard für die einfache und sichere
Einrichtung eines Drahtlosnetzwerks. Mit WPS können Sie mit ein paar wenigen, einfachen Schritten Ihr
Drahtlosnetzwerk einrichten und schützen.
Hinweis: Sie können WPS mit dem Modem-Router nur verwenden, wenn Sie einen Wireless-Client haben
,der WPS unterstützt. Wenn Sie einen oder mehrere Wireless-Clients ohne WPS-Unterstützung
haben, empfehlen wir Ihnen, die Verbindung mit dem Modem-Router manuell mithilfe des
vorkonfigurierten WPA-Schlüssels, der auf der Unterseite des Geräts zu finden ist, herzustellen.
Im Kapitel 6.1 oder 6.2 können Sie nachlesen, wie eine manuelle Verbindung mit dem
Drahtlosnetzwerk hergestellt wird.
Hinweis: Weitere (technische) Informationen über WPS finden Sie auf folgender Website:
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
Mit der WPS-Knopfdruck-Methode können Sie den C150APRA2 mit einem Wireless-Client verbinden, indem
Sie an beiden Geräten einen Knopf drücken.
Für die WPS-Knopfdruck-Methode ist ein (virtueller) Knopf am Wireless Client erforderlich, um eine
Verbindung zwischen dem C150APRA2 und dem Wireless Client herzustellen.
Einige Wireless-Clients haben einen richtigen Knopf für die Aktivierung der WPS-Knopfdruck-Methode; bei
anderen wiederum ist dies ein virtueller Knopf in deren Software.
Führen Sie die folgenden Schritte für die Aktivierung und Einrichtung einer WPS-Verbindung mit der
Knopfdruck-Methode aus:
A. Drücken Sie den WPS-Knopf auf der Hinterseite des C150APRA2; daraufhin beginnt die WPS-LED-
Anzeige zu blinken, was bedeutet, dass die WPS-Authentifizierung gestartet wurde.
B. Drücken Sie den WPS-Knopf am Wireless Client. Dies kann ein Hardware-Knopf oder ein virtueller
Knopf in der Software des Wireless Clients sein.
Hinweis: Der C150APRA2 behält die WPS-Authentifizierung während 120 Sekunden aktiv. Während
diesem Prozess blinkt die WPS-LED-Anzeige. Wenn in diesen 120 Sekunden keine WPS-
Verbindung zustande kommt, schaltet die LED-Anzeige aus und die WPS-Authentifizierung wird
abgebrochen.
Wenn die Authentifizierung erfolgreich war, leuchtet die WPS-LED dauerhaft, um anzuzeigen, dass eine
Verbindung hergestellt wurde.
Damit ist der Wireless-Client mit dem gesicherten Drahtlosnetzwerk des C150APRA2 verbunden.
Sie können weitere Wireless-Clients hinzufügen, wobei die Verbindung der zuvor verbundenen Wireless-
Clients bestehen bleibt. Wenn Sie weitere Wireless-Clients hinzufügen möchten, wiederholen Sie die
Schritte A und B.
DEUTSCH
90
7. Manuelle Konfiguration der Wireless-Sicherheit
In diesem Kapitel wird beschrieben, wie die Drahtlosverbindung des C150APRA2 manuell gesichert werden
kann. Ihr Netzwerk muss gesichert werden, um den unbefugten Zugriff darauf zu verhindern.
Führen Sie für die manuelle Konfiguration der Wireless-Sicherheit die folgenden Schritte aus.
A. Melden Sie sich auf dem C150APRA2 gemäß den Anweisungen in Kapitel 5.2 an.
B. Wireless Wireless Security
[Dr
DEUTSCH
91
C. Security Mode -Liste aus.
Hinweis: Auto (WPA oder WPA2)
Sie den höchsten Sicherheitsstandard (WPA2) und die Rückwärtskompatibilität mit Clients, die
nur WPA unterstützen, bleibt erhalten.
D. WPA Encryption [WPA--Liste aus.
Hinweis: Wir empfehlen, die „TKIP+AES”-Verschlüsselung auszuwählen. Damit erreichen Sie die höchste
Verschlüsselungsebene (AES) und die Rückwärtskompatibilität mit Clients, die nur TKIP
unterstützen, bleibt erhalten.
E. Pre-Shared Key [Pre-Shared-
F. Klicken Sie auf „Apply [Übernehmen], um die geänderten Sicherheitseinstellungen zu speichern.
Hinweis: Notieren Sie sich die Sicherheitsinformationen, die Sie eingeben. Sie werden diese benötigen,
wenn Sie einen drahtlosen Client mit dem C150APRA2 verbinden möchten.
Sie können jetzt mit den zuvor vorgenommenen Einstellungen gemäß den Anweisungen in Kapitel 6.1 eine
Verbindung des Wireless-Clients mit dem C150APRA2 herstellen.
DEUTSCH
92
8. Einrichten von Portweiterleitungsregeln
Der Conceptronic C150APRA2 ist mit einer eingebauten Firewall ausgerüstet, um Angriffe aus dem Internet
auf Ihr Netzwerk zu verhindern. Diese Firewall blockiert automatisch den gesamten eingehenden Verkehr
auf nicht benutzten Ports. Wenn für einen Dienst oder eine Anwendung ein blockierter Port benötigt wird
(zum Beispiel für einen FTP-oder WEB-Server), können Sie auf den Konfigurationsseiten eine
Portweiterleitungsregel erstellen, um den Verkehr weiterzuleiten.
Hinweis: Der Conceptronic C150APRA2 unterstützt Universal Plug & Play (UPnP); dies ermöglicht es
UPnP-kompatiblen Anwendungen und Geräten wie Spielkonsolen, die von ihnen benötigten
Ports automatisch zu öffnen, ohne dass dazu eine manuelle Konfiguration erforderlich ist.
Durch UPnP wird jedoch Ihre Netzwerkumgebung anfälliger auf Angriffe. Wenn Sie
Anwendungen haben, die UPnP verwenden, können Sie in der Konfiguration des C150APRA2
  -Option
aktivieren.
Folgendes ist eine Liste einiger häufig verwendeter Ports und deren jeweiligen Anwendungen:
Port Anwendung Port Anwendung
20 FTP Daten (FTP Server)
21 FTP (FTP Server)
22 SSH (Secure Shell)
23 Telnet
25 SMTP (Mail Server Ausgang)
80 HTTP (Webserver)
110 POP3 (Mail Server Eingang)
2000 Remotely Anywhere
5800 VNC
5900 VNC
Weitere Ports und deren jeweilige Anwendung finden Sie unter: http://portforward.com/cports.htm
Hinweis: Wir empfehlen, bei der Verwendung von Portweiterleitungsregeln den/die Computer mit einer
festen IP-Adresse statt mit einer dynamischen IP-Adresse zu konfigurieren.
Hinweis: Detaillierte Erklärungen zu den Portweiterleitungs- und DMZ-Optionen finden Sie im
erweiterten Benutzerhandbuch auf der Produkt-CD-ROM (nur Englisch). Wählen Sie dazu bitte
View Extended User Manual -Menü.
A. Melden Sie sich auf dem C150APRA2 gemäß den Anweisungen in Kapitel 5.2 an.
B. Advanced 
C. Port Forwarding [Portweiter
Daraufhin wird die Portweiterleitungskonfiguration auf Ihrem Bildschirm angezeigt.
DEUTSCH
93
Hinweis: Obige Abbildung zeigt ein Beispiel einer Portweiterleitungskonfiguration.
DEUTSCH
94
D. Add ortweiterleitungsregel
hinzuzufügen.
E. Wählen Sie aus der Dropdown-Select a Service 
Custom Server
Portweiterleitungsregel ein.
F. Geben Sie iServer IP Address [Server-IP--Adresse des Computers ein, der
die Portweiterleitungsregel verwendet.
G. External Port Start External Port End
f die aus dem Internet zugegriffen werden muss.
H. Wählen Sie für Ihre Portweiterleitungsregel aus der Dropdown-Protocol [Protokoll] ein
TCPUDPBoth [Beide]
Hinweis: Wenn Sie nicht wissen, welches Protokoll Sie für Ihre Portweiterleitungsregel benötigen,
Both - als auch der UDP-
Verkehr auf die konfigurierte IP-Adresse Ihres Computers/Servers geleitet.
I. Internal Port Start [Interne PorInternal Port End
[
J. Apply 
Jetzt wird die hinzufügte Regel in der Portweiterleitungsliste angezeigt.
Um weitere Portweiterleitungsregeln zu erstellen, wiederholen Sie die Schritte D bis J.
DEUTSCH
95
9. Neustart
Wenn Sie Einstellungen in der Konfiguration des Modem-Routers ändern, werden diese Einstellungen direkt
übernommen und aktiv. Es ist jedoch empfehlenswert, den C150APRA2 neu zu starten, nachdem Sie große
und wichtige Änderungen in der Konfiguration vorgenommen haben, um sicherzustellen, dass alle
Einstellungen korrekt übernommen werden.
A. Melden Sie sich auf dem C150APRA2 gemäß den Anweisungen in Kapitel 5.2 an.
B. Management 
C. System Management 
D. Reboot .
Während dem Neustart wird auf Ihrem Bildschirm ein Fortschrittsbalken angezeigt.
Warten Sie, bis dieser beendet ist, bevor Sie sich wieder anmelden.
Damit ist ihr C150APRA2 betriebsbereit!
Hinweis: Detaillierte Erklärungen zu den für den C150APRA2 verfügbaren Funktionen und Einstellungen
finden Sie im erweiterten Benutzerhandbuch auf der Produkt-CD-ROM (nur Englisch). Wählen
View Extenden User Manual [Erweitertes Benutzerhandbuch öffnen]-
Menü.
FRANÇAIS
96
C150APRA2 de Conceptronic
Manuel d’Utilisateur
Nous vous félicitons d'avoir acheté votre
modem routeur sans fil ADSL de Conceptronic.
Vous trouverez dans ce Manuel d'Utilisateur une explication détaillée de l'installation du modem routeur
sans fil ADSL de Conceptronic.
Pour plus d'informations ou pour obtenir de l'aide concernant votre produit, nous vous conseillons de
visiter notre site web de Service & Support sur www.conceptronic.net/supportet de sélectionner l'une
des options suivantes :
Foire aux Questions : Base de Données de Questions les plus Fréquemment Posées
Téléchargements : Manuels, Drivers, Microprogramme et plus de téléchargements
Contact : Pour contacter le Service support de Conceptronic
Pour plus d'informations générales concernant les produits Conceptronic, visitez le site web de
Conceptronic sur www.conceptronic.net.
Les informations contenues dans ce guide d'installation rapide sont basées sur Windows 7 et Vista, et donc

Note : 
routeur sans fil ADSL et le faire fonctionner. P
du modem routeur sans fil ADSL veuillez consulter 
anglais uniquement) contenu dans le Cd-Rom de Produit.
Table des matières
1. Contenu du Coffret
2. Explication du modem routeur sans fil ADSL de
Conceptronic
2.1. Façade avant
2.2. Façade arrière
3. Installation du hardware
3.1. Port (téléphonique) DSL
3.2. Port(s) LAN
4. Configuration de l'ordinateur
4.1. Configuration de votre adresse IP.
4.2. Vérification de votre connexion
5. Configuration du modem routeur
5,1. Réglages d'usine par défaut
5.2. Configuration basée sur Internet
5.3. Assistant de Configuration
6. Connexion à un réseau sans fil
6,1. Connexion manuelle sur Windows 7
6.2. Connexion manuelle sur Windows Vista
6.3. Connexion automatique avec WPS
7. Configurez manuellement votre sécurité sans fil
8. Paramétrage des règles de redirection de port
9. Redémarrage
FRANÇAIS
97
1. Contenu du Coffret
Les éléments suivants sont fournis dans le paquet avec le modem routeur sans fil ADSL de Conceptronic :
Modem routeur sans fil ADSL de Conceptronic (C150APRA2)
Antenne pour connexions sans fil
Alimentation électrique 12V CC, 800mA
Câble de réseau (LAN)
Câble de téléphone RJ-11
CD-ROM du produit

Carte de garantie et brochure de déclaration CE
2. Explication du modem routeur sans fil ADSL de Conceptronic
2.1 Façade avant
Description État Explication d'état
A LED Alimentation OFF L'appareil est éteint
ON - VERT L'appareil est allumé et l'initialisation est normale
ON - ROUGE L'appareil est en cours d'initialisation
ON - CLIGNOTANT Mise à jour du microprogramme en cours
B ADSL LED OFF Échec du test automatique initial
ON - CLIGNOTANT Appareil détecte signal DSL
ON - FIXE Signal DSL détecté, test automatique réussi
C LED Internet ON - Rouge Pas de connexion DSL
ON- Vert Connexion Internet disponible
D LED LAN OFF Le port LAN n'est pas connecté
(1, 2, 3, 4) ON- FIXE Un dispositif est connecté au port LAN
ON - CLIGNOTANT Transmission des données en cours
E LED WLAN OFF LAN sans fil est éteint
ON - FIXE LAN sans fil est actif et normal
ON - CLIGNOTANT Activité port LAN (Envoi ou réception de données)
F LED WPS OFF WPS (Wi-Fi Configuration protégée) non actif
ON - CLIGNOTANT WPS actif, nouveaux clients WLAN peuvent être ajoutés
ON - FIXE Client WPS ajouté avec succès
FRANÇAIS
98
2.2 Façade arrière
Description Explication
A Connexion antenne Pour brancher l'antenne fournie sur le modem routeur
B Port DSL Pour brancher votre ligne ADSL sur le modem routeur.
C Ports LAN (1 4) Pour connecter votre(vos) ordinateur(s) / dispositif(s) de réseau sur le
modem routeur.
D Connecteur électrique Pour brancher l'alimentation électrique sur le modem routeur
E Reset Pour restaurer aux paramètres d'usine (tenez la touche enfoncée).
F Touche WLAN / WPS Bref appui (1 sec) : Pour allumer ou éteindre le WiFi.
Appui prolongé (> 3 sec) : Pour lancer la configuration du Bouton Poussoir
WPS
G Touche marche/arrêt Pour éteindre ou allumer le modem routeur
FRANÇAIS
99
3. Installation du hardware
Branchez l'antenne fournie sur la connexion d'antenne [A] à l'arrière du modem routeur.
Connectez l'alimentation électrique sur la prise d'alimentation électrique [D] à l'arrière du modem
routeur et sur une prise électrique murale disponible.
Appuyez sur la touche marche/arrêt à l'arrière du modem routeur.
La LED d'alimentation sur la partie avant du modem routeur s'allume et le système du modem routeur
démarre.
3.1 Port (téléphonique) DSL
La plupart des fournisseurs ADSL nécessitent un filtre entre votre ligne téléphonique et le modem ADSL qui
empêche la ligne ADSL de produire des interférences avec les services téléphoniques traditionnels.
L'absence de ce filtre pourrait provoquer des problèmes de connexion ou une mauvaise performance de
l'appareil.
Note : 
votre compagnie de téléphone ou votre fournisseur internet pour obtenir le filtre ADSL correct.
Les ports de connexion d'un filtre ADSL sont normalement étiquetés comme suit :
Ligne : Ce port se connecte à la prise murale.
ADSL : Ce port se connecte au router
Téléphone : Ce port se connecte à un téléphone ou à un autre appareil téléphonique.

les connexions pour vous assurer que les câbles sont bien fixés et connectés au port correspondant.
Utilisez un câble téléphonique pour connecter le modem routeur sans fil ADSL de Conceptronic (B) sur
votre ligne téléphonique analogique locale (ou filtre). La LED ADSL s'allume dès qu'un signal ADSL est
détecté
Note : Si la LED ADSL sur la façade avant ne s'allume pas, vérifiez que :
- Le modem routeur sans fil ADSL est bien allumé (la led d'alimentation doit être allumée).
- Il y a un signal ADSL sur la ligne.
- La LED Internet ne s'allume en vert que lorsque d'un DSL et des paramètres de compte
d'utilisateur corrects sont appliqués sur l'Interface Web du modem routeur ADSL.
3.2 Port(s) LAN

fil ADSL et sur la carte de réseau de votre ordinateur.

doit être allumé et la Connexion LAN doit être activée).
FRANÇAIS
100
4. Configuration de l'ordinateur
4.1 Configuration de votre adresse IP.
Le C150APRA2 e
«Obtenir
automatiquement une adresse IP».
La plupart des ordinateurs sont configurés par défaut pour obtenir automatiquement une adresse IP. Si ce
n'est pas le cas, vous devez configurer votre ordinateur pour obtenir une adresse IP automatiquement en
suivant les instructions données ci-après : Cet exemple est basé sur Windows Vista avec Service Pack 1. Si
l'ordinateur fonctionne avec un système d'exploitation autre ou une version différente, les actions
nécessaires peuvent être un peu différentes.
A. Cliquez sur "Commencer" "Exécuter".
B. Entrez la commande "NCPA.CPL" et
appuyez sur "OK".
La fenêtre de "Connexions de Réseau
C. Cliquez avec le bouton de droite sur votre
"Connexion Locale" (avec ou sans fil, en fonction
de la connexion que vous utilisez) et sélectionnez
"Propriétés".
B
B
C
FRANÇAIS
101
La Fenêtre propriétés de 
D. Sélectionnez "Protocole Internet
Version 4 (TCP/IPv4)" et cliquez sur
"Properties".
La fenêtre Propriétés du Protocole Internet Version 4(TCP/IPv4) s'affiche.
E. Réglez les propriétés sur "Obtenir
automatiquement une adresse IP" et
appuyez sur "OK" pour enregistrer les
paramètres.
F. Appuyez sur "OK" dans la fenêtre de
propriétés de la Connexion de Réseau
Local pour enregistrer les paramètres.
D
D
E
E
FRANÇAIS
102
4.2 Vérification de votre connexion
Avec le Message de Commande de Windows, vous pouvez vérifier si vous avez reçu une adresse IP correcte
(avec fil ou sans fil) sur votre Connexion de Réseau Local. Cet exemple est basé sur Windows Vista avec
Service Pack 1. Vous devez disposer des droits d'administrateur sur Windows Vista pour réaliser les
opérations ci-après. Voici comment avoir les droits d'administrateur.
A. Cliquez sur "Démarrer" -> "Tous les programmes" > "Accessoires", cliquez avec la touche de droite
sur "Invite de Commande" et sélectionnez "Exécuter en tant qu'administrateur". Le système
affiche un message d'avertissement que vous devez accepter en cliquant sur "Continuer".
Vérifiez que le titre de l'Invite mentionne bien "Administrateur : Invite de
Commande". Si "Administrateur" n'est pas indiqué, cela signifie que vous n'avez pas les droits
d'administration nécessaires pour réaliser ces opérations ; vous devez alors recommencer à partir de
l'étape A.
B. Entrez la commande "IPCONFIG" et appuyez sur ENTER.
Vous verrez 
Adresse IPv4 : 192.168.0.xxx (où xxx peut être compris entre 100 ~ 199).
Masque de sous-réseau : 255.255.255.0
Passerelle par Défaut : 192.168.0.1
Si les informations présentées ci-dessus correspondent à votre configuration, vous pouvez poursuivre la
configuration de votre appareil au Chapitre 5.
Si les informations présentées ci-dessus ne correspondent pas à votre configuration (par ex. votre adresse
IP est 169.254.xxx.xxx), procédez comme indiqué ci-après :
1. Ét
2. 
3.  :
- "IPCONFIG/RELEASE
- "IPCONFIG/RENEW" pour recevoir une nouvelle adresse IP du dispositif.
B
FRANÇAIS
103
Si les actions ci-
ppareil.
Appuyez sur le Bouton Reset pendant +/- 15 secondes pour charger les paramètres par défaut. Lorsque la

Note : Si le problème persiste, vérifiez que tous les câbles sont bien connectés. Le port ADSL doit être
connecté à la ligne ADSL et au port LAN à l'ordinateur.
3
3
FRANÇAIS
104
5. Configuration du modem routeur
Ce chapitre décrit comment configurer le C150APRA2 à l'aide de l'Assistant de Démarrage Rapide. Lorsque
vous avez réalisé toutes les actions indiquées dans ce chapitre, votre routeur est paramétré pour une
connexion ADSL et peut se connecteur à Internet.
5.1 Réglages d'usine par défaut
Le C150APRA2 est préconfiguré en usine avec plusieurs paramètres. Les paramètres préconfigurés sont
indiqués ci-après :
Adresse IP : 192.168.0.1 (Serveur DHCP pour clients LAN/W-LAN Activé)
Nom d'utilisateur : admin (sélectionnez cet utilisateur)
Mot de Passe : admin (minuscules)
SSID sans fil : C150APRA2
Canal sans fil : Channel 6
Sécurité sans fil : WPA2
UPnP : désactivé (peut être activé lorsque la connexion Internet est configurée)
Si vous avez modifié des paramètres dans la configuration du C150APRA2, ils seront enregistrés dans la
mémoire du routeur. Pour réinitialiser 
- 15 secondes.
5.2 Configuration basée sur Internet

Internet pour configurer le dispositif.
Note : 

A. Lancez votre navigateur Internet (par ex. : Internet Explorer, Firefox, Safari ou Chrome).
B.  :
http://192.168.0.1/).
C. Vous obtenez d'abord une fenêtre de connexion où le système vous demande d'indiquer un Nom
d'utilisateur et un Mot de passe. Sélectionnez l'utilisateur "admin" dans la liste déroulante, saisissez
le mot de passe pour l'administrateur (par défaut = "admin") et cliquez sur "Login" pour saisir la
configuration basée sur Internet.
FRANÇAIS
105

[Aperçu] :
La page "Overview" affiche un court menu pour configurer et maintenir le C150APRA2.
FRANÇAIS
106
5.3 Assistant de Configuration
Vous pouvez configurer la connexion Internet du C150APRA2 grâce à l'assistant intégré. Cet assistant vous
aide à configurer les paramètres pas à pas.
Note : Avant de commencer avec l'Assistant de Configuration Rapide, vérifiez que vous disposez bien de
toutes les informations disponibles sur les paramètres Internet. (Par exemple : informations sur le
compte, type de connexion, etc.)
A. Cliquez sur la touche "Quick Start" [Démarrage Rapide] dans le menu supérieur de la configuration
Internet.
B. Cliquez sur la touche "Setup
Wizard" [Assistant de
Configuration].
C. L'écran d'accueil indique les quatre
premières étapes de l'assistant.
Cliquez sur "Next" [Suivant] pour
continuer.
D. Le modem ADSL détectera la date
correcte et l'heure lorsqu'il est
connecté à Internet. Ces
paramètres ne seront utilisés que
pour la connexion. Vous pouvez
sélectionner la zone horaire et les
dates des changements d'heure.
Lorsque vous avez terminé, cliquez
sur "Next".
FRANÇAIS
107
E. Sélectionnez votre pays et votre
Fournisseur de Services Internet.
Les paramètres corrects de votre
connexion Internet seront
appliqués. Vous pourrez les modifier
par la suite.
Si vous utilisez des connexions
Internet PPPOE ou PPPOA, utilisez
le nom d'utilisateur et le mot de
passe que vous avez reçus de votre
Fournisseur de Services Internet.
Lorsque vous avez terminé, cliquez
sur "Next".
F. Vous pouvez activer ou désactiver
votre Réseau sans fil (activé par
défaut). Le modem routeur affiche
son propre nom comme SSID
"C150APRA2" mais vous pouvez
également occulter le SSID. Il est
préconfiguré avec un code de
sécurité WPA2-PSK unique.
Note : Vous trouverez le code de
sécurité défini à l'avance sur
la partie inférieure du
modem routeur.
Vous pouvez conserver le code
indiqué dans l'Interface Utilisateur
ou le remplacer par un Code Pré-
Partagé que vous souhaitez.
Lorsque vous avez terminé, cliquez
sur "Next".
FRANÇAIS
108
G. Lorsque vous avez terminé de
configurer le réseau LAN sans fil,
vous obtenez le "Setup Summary"
[Résumé de la configuration] avec
un aperçu des réglages.
Lorsque vous êtes prêt, cliquez sur
"Apply".
Votre dispositif est alors configuré
et votre connexion Internet est
prête.
FRANÇAIS
109
6. Connexion à un réseau sans fil
Il existe deux manières différentes de vous connecter sans fil au réseau de votre modem routeur :
- Manuellement.
- En utilisant automatiquement la fonction WPS.
Presque tous les types / toutes les marques de cartes sans fil utilisent une application client différente.

connexion avec un réseau sans fil.
6.1 Connexion manuelle sur Windows 7
Dans l'exemple suivant, l'option intégrée "Connexion à un réseau" dans Windows 7 est utilisée.
A. Cliquez sur l'icône "Réseau" de la barre
de tâches pour voir la liste des
connexions de réseau sans fil disponibles.
B. Sélectionnez le réseau "C150APRA2"
dans la liste et cliquez sur "Connexion".
Par défaut l'option "Lancer
automatiquement cette connexion" est
sélectionnée. De cette manière la
connexion démarrera automatiquement
chaque fois que vous allumerez votre
ordinateur. Si vous ne le souhaitez pas,
vous pouvez désactiver cette option
avant de cliquer sur "Connexion".
! NOTE IMPORTANTE !
Le routeur sans fil est protégé par le cryptage WPA-PSK/WPA2-PSK Mixed mode par défaut.
Le mot de passe exclusif de WPA est indiqué sur l'autocollant du produit de votre modem routeur.
FRANÇAIS
110
C. Entrez la phrase code WPA par défaut
(indiquée sous le routeur sans fil) dans le
champ "Clé de Sécurité" et cliquez sur
"Connexion".
D. Le client commencera alors à vous
connecter au réseau sans fil.
E. Pour vérifier l'état de la connexion sans
fil, vous pouvez cliquer sur l'Icône
"Réseau" dans la barre de tâches. Vous
pouvez y voir sur quel réseau vous êtes
actuellement connecté, l'accès dont vous
disposez et la force du signal de la
connexion.
FRANÇAIS
111
6.2 Connexion manuelle sur Windows Vista
Dans l'exemple suivant, l'option intégrée "Connexion à un Réseau" dans Windows Vista avec Service PAck
1 est utilisée.
A. Cliquez sur l'icône "Réseau" de
votre plateau système et cliquez
sur "Des réseaux sans fil sont
disponibles".
B. Sélectionnez le réseau
"C150APRA2" dans la liste et
cliquez sur "Connexion".
C. Entrez le mot de passe WPA par
défaut (indiqué sous le
C150APRA2) dans le champ "Code
de sécurité ou mot de passe" et
cliquez sur "Connexion".
FRANÇAIS
112
D. Lorsque la connexion est établie,
vous pouvez choisir d'enregistrer
le réseau et de le faire démarrer
automatiquement chaque fois
que votre ordinateur est ON.
Cliquez sur "Fermer" pour sortir
de l'assistant de configuration.
E. Pour vérifier l'état de la
connexion sans fil, vous pouvez
cliquer sur l'icône de Réseau dans
le plateau système. Vous pouvez
y voir sur quel réseau vous êtes
actuellement connecté, l'accès
dont vous disposez et la force du
signal de la connexion.
FRANÇAIS
113
6.3 Connexion automatique avec WPS
Le routeur sans fil de Conceptronic supporte WPS (Configuration de Wi-Fi Protégée). WPS est une norme
pour paramétrer facilement et sécuriser un réseau sans fil. Avec WPS vous pouvez paramétrer et protéger
votre réseau sans fil en quelques petits clics seulement.
Note : Pour utiliser WPS avec le modem routeur, vous devez disposer d'un client sans fil qui supporte
WPS. Si vous disposez d'un ou de plusieurs clients sans fil sans support WPS, nous vous conseillons
de vous connecter manuellement au modem routeur à l'aide de la clé WPA configurée à l'avance,
comme indiqué sous l'appareil. Consultez le chapitre 6.1 ou 6.2 pour savoir comment vous
connecter manuellement au réseau sans fil.
Note : Pour plus d'informations (techniques) sur WPS, vous pouvez consulter le site web suivant :
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
Avec la technologie de Bouton-poussoir WPS, vous pouvez connecter votre modem routeur à un client en
appuyant sur un bouton sur chaque appareil.
La technologie de Bouton WPS nécessite un bouton (virtuel) sur votre client sans fil pour établir une
connexion entre le modem routeur et votre client sans fil.
Certains clients sans fil travaillent avec un bouton réel pour activer la technologie de Bouton de SPW ;
certains clients sans fil utilisent un bouton virtuel dans leur software.
Procédez comme indiqué ci-après pour activer et définir une connexion WPS avec la technologie Bouton :
A. Appuyez sur le bouton WPS à l'arrière du routeur sans fil, la LED WPS commence à clignoter pour
indiquer que l'authentification WPS a commencé.
B. Appuyez sur le bouton WPS de votre client sans fil. Il peut s'agir d'un bouton de hardware ou d'un
bouton virtuel dans le software de votre client sans fil.
Note : Le modem routeur laisse l'authentification WPS active pendant 120 secondes. Pendant ce
processus, la LED WPS clignote. S'il n'y a pas de connexion pendant ces 120 secondes, la LED s'éteint
et le processus d'authentification WPS s'arrête.
Si l'authentification WPS est réussie, la LED WPS s'allumera fixement pour indiquer que la connexion est
réussie.
Le client sans fil est à présent connecté sur le réseau sans fil sécurisé du modem routeur.
Vous pouvez ajouter d'autres clients sans fil WPS sans perdre la connexion aux clients sans fil WPS
précédents. Si vous souhaitez ajouter d'autres clients sans fil, vous devez reprendre les étapes A et B.
FRANÇAIS
114
7. Configurez manuellement votre sécurité sans fil
Ce chapitre décrit comment sécuriser manuellement la connexion sans fil du C150APRA2. Pour empêcher
tout accès non autorisé dans votre réseau, il est indispensable de le sécuriser.
Procédez comme indiqué ci-après pour configurer manuellement la sécurité sans fil.
A. La connexion au C150APRA2 est décrite au chapitre 5.2.
B. Cliquez sur "Wireless" [Sans fil] puis choisissez "Wireless Security" [Sécurité sans fil] dans le menu
de gauche.
FRANÇAIS
115
C. Choisissez un "Security Mode" [Mode de Sécurité] dans la liste déroulante.
Note : Nous vous conseillons de sécuriser votre réseau à l'aide de la sécurité "Auto (WPA ou WPA2). Ceci
permet d'avoir un niveau de sécurité maximum (WPA2) tout en maintenant la compatibilité arrière
avec des clients qui ne supportent que WPA.
D. Choisissez un "WPA Encryption" [Cryptage WPA] dans la liste déroulante.
Note : Nous vous conseillons de sélectionner le cryptage "TKIP+AES". Ceci permet d'avoir un niveau de
sécurité maximum (AES) tout en maintenant la compatibilité arrière avec des clients qui ne
supportent que TKIP.
E. Entrez un code de sécurité dans le champ de "Pre-Shared Key".
F. Cliquez sur "Apply" pour enregistrer les paramètres de sécurité modifiés.
Note : Souvenez-vous des informations de sécurité que vous indiquez ou notez-les. Vous en aurez besoin
pour connecter un client sans fils sur le C150APRA2.
Vous pouvez à présent utiliser les paramètres que vous venez de régler pour connecter votre client sans fil
au C150APRA2 comme indiqué au Chapitre 6.1 et au Chapitre 6.2.
FRANÇAIS
116
8. Paramétrage des règles de redirection de port
-
dans votre réseau. Ce pare-feu bloque automatiquement tout le trafic entrant de ports non utilisés. Si
vous avez besoin d'un port bloqué pour un service ou une application (par exemple : un site FTP ou un
serveur Web), vous pouvez créer une règle de redirection de port sur les pages de configuration pour
rediriger le trafic.
Note : Le C150APRA2 de Conceptronic supporte Universal Plug & Play (UpnP), qui permet aux
applications compatibles avec UPnP et aux appareils tels que les consoles de jeux d'ouvrir
automatiquement les ports sans avoir besoin de configuration manuelle. Néanmoins UPnP rend
également votre environnement de réseau plus vulnérable aux attaques. Si vous utilisez des
applicatyions qui utilisent UPnP, vous pouvez activer l'option UPnP dans la configuration du
Advanced Network Tools UPnP" ["Avancé" "Outils de Réseau" "UPnP"]
Vous trouverez ci-après une liste des ports les plus couramment utilisés et leur application
correspondante:
Port Application Port Application
20 Données FTP (Serveur FTP)
21 FTP (Serveur FTP)
22 SSH (Secure Shell)
23 Telnet
25 SMTP (Serveur de mail - sortant)
80 HTTP (Serveur Web)
110 POP3 (Serveur de mail - entrant)
2000 À distance n'importe
5800 VNC
5900 VNC
Pour connaître les détails sur d'autres ports et leurs applications correspondantes, veuillez consulter le
site suivant : http://portforward.com/cports.htm
Note : Lorsque vous utilisez des règles de redirection de port, nous vous conseillons de configurer le/s
ordinateur/s avec u
Note : 
-Rom du Produit.
Sélectionnez "View Extended User Manual" [Voir manuel d'utilisateur version longue] dans le
menu à lancement automatique.
A. La connexion au C150APRA2 est décrite au chapitre 5.2.
B. lectionnez "Advanced" dans le menu de la partie supérieure.
C. Sélectionnez "Port Forwarding" [Redirection de port] dans le menu de la partie supérieure.
La configuration "Port Forwarding" s'affiche à l'écran.
FRANÇAIS
117
Note : L'image ci-après vous présente un exemple d'une configuration de redirection de ports.
FRANÇAIS
118
D. Cliquez sur le bouton "Add" pour ajouter une nouvelle règle de redirection de port.
E. Sélectionnez un service préréglé dans la liste déroulante "Select a Service" [Sélectionner un
service] ou indiquez un nouveau nom de service pour votre règle de redirection de port dans le
champ "Custom Server" [Serveur Personnalisé]
F. Server IP
Address" [Adresse IP de Serveur].
G. Indiquez les ports que vous souhaitez accessibles par Internet dans les champs "External Port Start"
et "External Port End" [Démarrage de port externe] [Fin de port externe].
H. Choisissez un protocole pour votre règle de redirection de port dans la liste déroulante "Protocol"
TCPUDPBoth
Note : Si vous ne savez pas de quel protocole vous avez besoin pour votre redirection de port, sélectionnez
"Both". Cette option passera les deux trafics, TCP et UDP à l'adresse IP configurée sur votre
ordinateur / serveur.
I. Indiquez les ports que vous souhaitez accessibles par Internet dans les champs "Internal Port Start"
et "Internal Port End" [Démarrage de port interne] [Fin de port interne].
J. Cliquez sur "Apply" pour enregistrer les règles de redirection de port.
La règle ajoutée est à présent visible dans la liste de redirection de port.
Pour créer d'autres règles de redirection de port, répétez les étapes D à J.
FRANÇAIS
119
9. Redémarrage
Si vous modifiez les paramètres de la configuration du modem routeur, les paramètres sont directement
appliqués et actifs. Néanmoins nous vous conseillons de redémarrer le C150APRA2 après avoir fait
d'importantes modifications dans la configuration pour vous assurer que tous les paramètres sont bien
appliqués.
A. La connexion au C150APRA2 est décrite au chapitre 5.2.
B. lectionnez "Management" [Gestion] dans le menu de la partie supérieure.
C. Sélectionnez "System Management" [Gestion de système] dans le menu de gauche.
D. Cliquez sur le bouton "Reboot" [Redémarrage] pour faire redémarrer le C150APRA2.
Pendant ce redémarrage, une barre de progression s'affiche sur votre écran.
Attendez que la barre de progression arrive à la fin avant de vous connecter à nouveau.
Vous pouvez dès à présent utiliser votre C150APRA2 !
Note : res du C150APRA2, veuillez
-Rom de
Produit. Sélectionnez "View Extended User Manual" [Voir Manuel d'Utilisateur version longue]
dans le menu à lancement automatique.
ITALIANO
120
Conceptronic C150APRA2
Manuale d’uso
Complimenti per aver acquistato il modem router ADSL wireless di
Conceptronic.
Il presente manuale illustra passo dopo passo come installare e utilizzare il modem router ADSL wireless di
Conceptronic.
Per ulteriori informazioni o assistenza relativamente al prodotto, consultare il sito Service & Support
www.conceptronic.net/support, selezionando una delle seguenti opzioni:
FAQ : Archivio delle risposte alle domande più frequenti
Download : Manuali, driver, firmware e altri prodotti scaricabili
Contact : Contattare il servizio di assistenza Conceptronic
Per ricevere informazioni generali sui prodotti Conceptronic, visitare il sito Web di Conceptronic
www.conceptronic.net.
Le informazioni contenute in questo manuale si riferiscono a Windows 7 e Vista, e possono variare in
maniera significativa in computer in cui sia installato un sistema operativo differente.
Nota: 
router ADSL wireless. Per maggiori informazioni sulle varie funzioni del modem router ADSL
wireless, si rinvia alla consultazione del ma-ROM
allegato al prodotto.
Indice
1. Contenuto della confezione
2. Descrizione del modem router ADSL wireless
2.1. Pannello frontale
2.2. Pannello posteriore
3. Installazione dell’hardware
3.1. Porta DSL (Telefono)
3.2. Porta (e) LAN
4. Configurazione del computer
4.1. 
4.2. Verifica della connessione
5. Configurazione del modem router
5.1. Impostazioni predefinite
5.2. Configurazione tramite Web
5.3. Pro
6. Connessione a una rete wireless
6.1. Connessione manuale per Windows 7
6.2. Connessione manuale per Windows Vista
6.3. Connessione automatica con WPS
7. Configurazione manuale della sicurezza
wireless
8. Configurazione delle regole d’inoltro delle
porte
9. Riavvio del sistema
ITALIANO
121
1. Contenuto della confezione
La confezione del modem router ADSL wireless di Conceptronic contiene le seguenti unità:
Modem router ADSL wireless di Conceptronic (C150APRA2)
Antenna per connessioni wireless
Alimentazione elettrica da 12V DC, 800mA
Cavo di rete (LAN)
Cavo telefonico RJ-11
CD-ROM del prodotto

Certificato di garanzia e libretto di dichiarazione di conformità CE
2. Descrizione del modem router ADSL wireless
2.1 Pannello frontale
N Descrizione Stato Illustrazione dello stato
A LED di accensione OFF 
ON - VERDE 
normale
ON - RED 
ON LAMPEGG. Aggiornamento in corso del firmware
B LED ADSL OFF Auto-test iniziale non eseguito correttamente
ON LAMPEGG. Rilevazione del segnale DSL in corso
ON - FISSO Segnale DSL rilevato, auto-test effettuato con successo
C LED Internet ON - Rosso Nessuna connessione DSL
ON - Verde Connessione Internet disponibile
D LED LAN OFF Porta LAN disconnessa
(1, 2, 3, 4) ON - FISSO Un dispositivo è connesso alla porta LAN
ON LAMPEGG. Trasmissione dati in corso
E LED WLAN OFF La funzione wireless LAN non è attiva
ON - FISSO La funzione wireless LAN è attiva e funzionante
ON - LAMPEGG. Attività wireless LAN (invio/ricezione dati)
F LED WPS OFF La funzione WPS (Wi-Fi Protected setup) non è attiva
ON - LAMPEGG. La funzione WPS è attiva, nuovi client WLAN possono
essere aggiunti
ON FISSO Client WPS aggiunto con successo
ITALIANO
122
2.2 Pannello posteriore
N Descrizione Illustrazione
A Connessione antenna 
B Porta DSL Collega la linea ADSL al modem router.
C Porte LAN (1 4) Collega uno o più computer o dispositivi di rete al modem router.
D Connettore elettrico l modem router.
E Ripristino Esegue un ripristino (se tenuto premuto).
F Pulsante WLAN / WPS Premendo brevemente (1 sec) : Accende o spegne la funzione WiFi.
Premendo a lungo (> 3 sec) : Attiva la configurazione WPS Push Button.
G Tasto alimentazione Accende o spegne il modem router.
ITALIANO
123
3. Installazione dell’hardware
A] posto sul retro del modem router.
D] posto sul retro del modem router e a
una presa a muro libera.
G] sul retro del modem router.
Il LED di accensione sulla parte frontale del modem router si illuminerà e il modem router effettuerà

3.1 Porta DSL (telefono)

ADSL per evitare che la linea ADSL interferisca con i regolari servizi telefonici. In mancanza di tale
splitter, si potrebbero verificare dei problemi di connessione o prestazioni inadeguate.
Nota: Lo splitter per la connessione ADSL non è in dotazione con il C150APRA2. Si prega di contattare il
proprio fornitore Internet o di servizi telefonici per avere informazioni sullo splitter ADSL più
adeguato.
Le porte di connessione di uno splitter ADSL riportano tipicamente le seguenti indicazioni:
Linea : Questa porta collega la presa a muro
ADSL : Questa porta collega il router
Telefono : Questa porta collega un telefono o un dispositivo telefonico
Accertarsi che le linee siano correttamente collegate. Se non è udibile il tipico rumore di digitazione del
telefono, controllare i collegamenti in modo che siano correttamente inseriti e connessi alla porta
corretta.
Utilizzare un cavo telefonico per collegare il modem router ADSL wireless Conceptronic (B) alla propria

Nota: Se il LED ADSL posto sul pannello frontale non si illumina, accertarsi che:
- 
deve essere rosso).
- Esista un segnale ADSL sulla linea.
- Il LED Internet diventerà verde solo quando saranno correttamente impostati il DSL e l

3.2 Porta(e) LAN
Collegare il cavo di rete (LAN) a una delle quattro porte LAN poste sul pannello posteriore del router
modem ADSL wireless e alla scheda di rete del computer.
Il LED LAN della porta LAN utilizzata si illuminerà indicando che il computer è connesso (Il computer deve
essere acceso e la connessione LAN attiva).
ITALIANO
124
4. Configurazione del computer
4.1 Configurazione dell’indirizzo IP
Il C150APRA2 è dotato di un server interno DHCP. Il server DHCP assegnerà automaticamente un indirizzo
“Ottieni un indirizzo IP in maniera
automatica” Obtain an IP address automatically
La maggior parte dei computer sono configurati in maniera predefinita per ottenere automaticamente un
indirizzo IP. In caso contrario, sarà necessario configurare il computer per ottenere un indirizzo IP in
maniera automatica seguendo le istruzioni sotto riportate. Tali istruzioni si riferiscono a Windows Vista
con Service Pack 1. Qualora nel computer sia installata una versione diversa o di un diverso sistema
operativo, le operazioni potrebbero differire da quelle indicate.
A. Start 
Run
B. NCPA.CPL
OK
Network Connections
C. 
Local Area Connection
o wireless, in base alla connessione utilizzata) e
Properties
B
B
C
ITALIANO
125
Verrà visualizzata la finestra delle proprietà della connessione alla rete locale.
D. 
Internet
Protocol Version 4 (TCP/IPv4)
clic sProperties
Verrà visualizzata la finestra delle proprietà del protocollo Internet versione 4 (TCP/IPv4).
E. 

Obtain an IP address automatically
OK
impostazioni.
F. OK
proprietà della connessione alla rete
locale per salvare le impostazioni.
D
D
E
E
ITALIANO
126
4.2 Verifica della connessione
ente di verificare se è stato ottenuto un

riportato si riferisce a Windows Vista con Service Pack 1. Per eseguire le operazioni sotto riportate, è
necessario disporre dei requisiti di amministratore. Di seguito, viene illustrato come acquisire i diritti di
amministratore.
A. Start All programsAccessories
Command Prompt
Run as administrator
Continue
Verrà visualizzat
Administrator: Command Prompt
Administratorifica che non si dispongono dei
requisiti necessari di amministratore per andare avanti. In tal caso è necessario ripetere la procedura
illustrata al punto A.
B. IPCONFIG“INVIO” ENTER”).
Il sistema dovrebbe visualizzare le seguenti informazioni:
Indirizzo IPv4 : 192.168.0.xxx (in cui xxx può assumere valori compresi tra 100 ~ 199).
Maschera di sottorete: 255.255.255.0
Gateway predefinito : 192.168.0.1
Se le informazioni sopra riportate corrispondono alla configurazione del proprio computer, è possibile
proseguire impostando il router come illustrato nella sezione 5.
B
ITALIANO
127
Qualora dette informazioni non corrispondessero alla configurazione del proprio computer (per es.
guire come di seguito illustrato:
1. 
2. Ricollegare il cavo LAN al dispositivo e al computer.
3. 
- IPCONFIG /RELEASE
- IPCONFIG /RENEW

riconfigurare il dispositivo riportandolo alle impostazioni predefinite tramite il pulsante di ripristino posto
sul retro del dispositivo.
Tenere premuto il pulsante di ripristino per circa 15 secondi per caricare le impostazioni predefinite. Non
appena il LED di stato è di nuovo attivo, è necessario ripetere le istruzioni del punto B per aggiornare

Nota: Se il problema persiste, verificare che tutti i cavi siano collegati in maniera corretta. La porta
ADSL va connessa alla porta LAN del computer.
3
3
ITALIANO
128
5. Configurazione del modem router

data. Dopo aver eseguito le operazioni riportate in questa sezione, il router sarà impostato per stabilire la
connessione ADSL e sarà in grado di connettersi a Internet.
5.1 Impostazioni predefinite
Il C150APRA2 è configurato in maniera predefinita in base a una serie di impostazioni. Le impostazioni
predefinite sono le seguenti:
Indirizzo IP : 192.168.0.1 (Server DHCP per client LAN/WLAN abilitati)
Username : admin (selezionare questo utente)
Password : admin (caratteri minuscoli)
SSID Wireless : C150APRA2
Canale Wireless : Canale 6
Wireless Security : WPA2
UPnP : disabilitato (può essere abilitato una volta configurata la connessione Internet)
Una volta modificate le impostazioni di configurazione del C150APRA2, queste ultime saranno salvate sulla
memoria del router. Per ripristinare le impostazioni predefinite, tenere premuto il pulsante di ripristino
posto sul retro del dispositivo per circa 15 secondi.
5.2 Configurazione tramite Web

browser Web per la configurazione del dispositivo.
Nota: Per la configurazione del router, si consiglia di utilizzare un cavo di connessione LAN sul dispositivo,
invece di una connessione wireless.
A. Avviare il browser Web (per es.: Internet Explorer, FireFox, Safari o Chrome).
B.  browser Web (predefinito:
http://192.168.0.1/).
C. Verrà visualizzata una finestra di login in cui è necessario inserire il nome utente e la password.
admin
adminLogin
ITALIANO
129
Se il nome utente e la password sono corretti, il router visualizzerà la pagina principale:
La pagina principale contiene un menu rapido per la configurazione e la manutenzione del C150APRA2.
ITALIANO
130
5.3 Procedura d’installazione guidata

guidata prevista. Tale procedura consentirà di configurare le impostazioni basilari, passo dopo passo.
Nota: Prima di avviare la procedura guidata, accertarsi di avere tutte le informazioni sulla connessione

A. Cliccare sul pulsante “Avvio rapido” Quick Start
B. 
Setup Wizard
C. La finestra di benvenuto elenca
quattro passi della procedura

(Next”) per proseguire.
D. Il modem ADSL rileverà la data e

Internet. Questi dati saranno
utilizzati solamente per la
registrazione. È possibile
selezionare il fuso orario e le
impostazioni di risparmio

farNext
ITALIANO
131
E. Selezionare il proprio paese e
provider Internet. Saranno applicate
le impostazioni giuste per la
connessione Internet, che potranno
essere modificate in seguito.
Con connessioni Internet PPPOE o
PPPOA, utilizzare lo username e la
password forniti dal proprio
provider Internet.

Next
F. È possibile abilitare o disabilitare la
propria rete wireless (abilitata di
default). Il modem router è
C150APRA2
ma è possibile nasconderlo. È altresì
predefinito con una chiave di
sicurezza unica WPA2-PSK.
Nota: La chiave di sicurezza
predefinita è posta sul retro
del modem router.
È possibile mantenere la stessa

utente o cambiarla in una chiave
precondivisa a proprio piacimento.

Next
ITALIANO
132
G. Una volta ultimata la configurazione
LAN wireless, il sistema visualizzerà

Setup Summary
delle impostazioni.
Una volta pronti, cliccare su
Apply
Il dispositivo è ora configurato e la
connessione Internet pronta per
essere utilizzata.
ITALIANO
133
6. Connessione alla rete wireless
Esistono due diversi modi per collegarsi senza fili alla rete del modem router:
- Manualmente.
- Automaticamente, utilizzando la funzione WPS.
Quasi tutte le schede wireless, a prescindere dal marchio e dal modello, utilizzano una diversa
applicazione client. Si rinvia al manuale della scheda di rete wireless per informazioni su come creare una
connessione a una rete senza fili.
6.1 Connessione manuale per Windows 7
Connect to a Network
per Windows 7.
A. Network
sulla barra delle applicazioni per

rete senza fili disponibili.
B. C150APRA2

Connect
In maniera predefinita, viene selezionata

Connect automatically
che la connessione sia lanciata

computer. Per evitare che ciò avvenga, è

Connetti”.
! IMPORTANTE !
Il router wireless è reso sicuro in maniera predefinita dal sistema di criptaggio WPA-PSK/WPA2-PSK
(modalità mista). L’unica password WPA si trova sull’etichetta del prodotto apposta sul router.
.
ITALIANO
134
C. Inserire la password WPA predefinita
(presente sul retro del router wireless)

Security keyOK
D. Il client inizierà a connettersi alla rete
wireless.
E. Per verificare lo stato della connessione
senza fili, è pos
Rete
Sarà possibile vedere a quale rete ci si
sta connettendo, il tipo di accesso di cui
si dispone, e la forza del segnale della
connessione.
ITALIANO
135
6.2 Connessione manuale per Windows Vista
NeConnect to a
Network
A. rete
barra delle applicazioni e su
“Elenco reti senza fili
disponibili” Wireless networks
are available
B. C150APRA2

Connetti”.
C. Inserire la password WPA
predefinita (presente sul retro
del C150APRA2) nel campo
“Password o chiave di
sicurezza” Security key or
passphrasefare clic su
“Connetti”.
ITALIANO
136
D. Una volta stabilita la
connessione, è possibile salvare
la rete come predefinita e
consentire che si avvii
automaticamente all'accensione
del computer. Cliccare su
Chiudi
procedura guidata.
E. Per verificare lo stato della
connessione senza fili, è possibile
Rete
barra delle applicazioni. Sarà
possibile vedere a quale rete ci si
sta connettendo, il tipo di
accesso di cui si dispone, e la
forza del segnale della
connessione.
ITALIANO
137
6.3 Connessione automatica con WPS
-Fi Protected Setup). Il sistema WPS è
installare e
proteggere con poche semplici operazioni la rete wireless.
Nota: Per utilizzare il sistema WPS con il modem router, è necessario disporre di un client wireless che
supporti il WPS. Se si dispone di uno o più client wireless sprovvisti di WPS, è consigliabile
collegarsi manualmente al modem router utilizzando la chiave WPA predefinita indicata sul retro.
Si rinvia alla sezione 6.1 o 6.2 per collegare manualmente la rete wireless.
Nota: Per maggiori informazioni (tecniche) sul WPS, visitare il seguente sito Web:
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
Con la tecnologia Push Button WPS, è possibile collegare il modem router a un client premendo un
pulsante sul dispositivo.
La tecnologia Push Button WPS richiede un tasto (virtuale) sul client wireless per stabilire una connessione
tra il router wireless e il client wireless.
Alcuni client wireless utilizzano un tasto reale per attivare la tecnologia Push Button WPS; altri client
wireless utilizzano un tasto virtuale nel loro software.
Seguire le istruzioni sotto riportate per attivare e stabilire una connessione WPS con la tecnologia Push
Button:
A. Premendo il tasto WPS sul retro del router wireless, il LED WPS comincerà a lampeggiare indicando

B. Premere il tasto WPS sul client wireless. Può trattarsi sia di un tasto hardware sia di un tasto virtuale
presente nel software del client wireless.
Nota: nticazione WPS attiva per 120 secondi. Durante questo processo, il
LED WPS comincerà a lampeggiare. Se la connessione WPS non viene stabilita entro 120 secondi, il

successo, il LED WPS si accenderà in maniera fissa per indicare
che la connessione è stata correttamente stabilita.
Il client wireless è ora connesso alla rete wireless protetta del modem router.
É possibile aggiungere altri client wireless, senza perdere la connessione in precedenza creata per altri
client. Per aggiungere ulteriori client wireless, ripetere le istruzioni della sezione A e B.
ITALIANO
138
7. Configurazione manuale della sicurezza wireless
Questa sezione illustra come rendere sicura manualmente la connessione del C150APRA2. Per evitare
accessi non autorizzati alla rete, è necessario rendere sicura la rete stessa.
Seguire le istruzioni sotto riportate per configurare manualmente la sicurezza wireless.
A. Entrare nel C150APRA2 seguendo le modalità descritte nella sezione 5.2.
B. WirelessWireless Security
sinistra.
ITALIANO
139
C. Security Mode
Nota: Si consiglia di mettere in sicurezza la rete Auto (WPA or WPA2)
sistema consente di impostare il livello di sicurezza più alto (WPA2), mantenendo la compatibilità
con versioni precedenti di client che supportano unicamente il sistema WPA.
D. Criptaggio WPA
Nota: TKIP+AES
sicurezza più elevati (AES), mantenendo la compatibilità con versioni precedenti di client che
supportano unicamente il TKIP.
E. Pre-Shared Key
F. Applica
Nota: Si consiglia di ricordare o di appuntare le informazioni di sicurezza che si inseriscono. Potrebbero
essere necessarie allorché si desidera collegare un client wireless al C150APRA2.
È ora possibile usare le impostazioni così modificate per collegare un client wireless al C150APRA2, come
descritto nella sezione 6.1 e nella sezione 6.2.
ITALIANO
140
8. Configurazione delle regole d’inoltro delle porte
Il C150APRA2 di Conceptronic è dotato di un firewall integrato per prevenire attacchi da Internet verso la
rete. Detto firewall blocca automaticamente tutto il traffico in entrata sulle porte non utilizzate. Quando


Nota: Il C150APRA2 di Conceptronic supporta il sistema universale Plug & Play (UPnP), che consente ad
applicazioni e dispositivi UPnP compatibili, quali console di videogiochi, di aprire
automaticamente le porte di cui hanno bisogno senza doverle configurare manualmente.


Advanced Network
Tools UPnP
Di seguito è riportata una lista delle porte più comunemente utilizzate e delle relative applicazioni:
Porta Applicazione Porta Applicazione
20 Dati FTP (Server FTP) 80 HTTP (Web server)
21 Dati FTP (Server FTP) 110 POP3 (Server e-mail in entrata)
22 SSH (Shell sicura) 2000 Remotely Anywhere
23 Telnet 5800 VNC
25 SMTP (Server e-Mail in uscita) 5900 VNC
Per informazioni su altre porte e relative applicazioni, consultare http://portforward.com/cports.htm-
Nota: 
indirizzo IP fisso invece di un indirizzo IP dinamico.
Nota: Per informazioni più dettagliate riguar
-
View User Manual
A. Loggarsi al C150APRA2 come descritto nella sezione 5.2.
B. Advanced
C. Port Forwarding
La pagina di configurazione di inoltro delle porte verrà visualizzata a schermo.
ITALIANO
141
Nota: mmagine è riportato un esempio di configurazione di inoltro delle porte.
ITALIANO
142
D. Add
E. Select a Service

Custom Server
F. 
IP serverServer IP Address
G. 
External Port StartExternal Port End
H. 
ProtocolTCPUDPBoth
Nota: Both
opzione consentirà di passare sia il traffico TCP che UDP all
computer/server.
I. Inserire le porte che si desidera rendere accessibili dal proprio computer nella rete locale nei campi
Internal Port StartInternal Port End
J. Applyporte.

Per creare altre regole di inoltro delle porte, ripetere le operazioni dal punto D al J.
ITALIANO
143
9. Riavvio del sistema
Quando si modificano le impostazioni di configurazione de
immediatamente applicate e attive. Si consiglia, tuttavia, di riavviare il C150APRA2 dopo aver eseguito
modifiche significative e importanti di configurazione per accertarsi che tutte le impostazioni vengano
correttamente applicate.
A. Loggarsi al C150APRA2 come illustrato nella sezione 5.2.
B. Management
C. System Management
D. Rebootare il C150APRA2.
Durante il riavvio, una barra di progressione verrà visualizzata sullo schermo.
Attendere fino al completamento della barra di progressione prima di loggarsi di nuovo.
Il C150APRA2 è pronto per essere utilizzato!
Nota: Per maggiori informazioni sulle caratteristiche e impostazioni disponibili per il C150APRA2, si
-ROM del prodotto. Selezionare
View Extended User Manual
PORTUGUÊS
144
Conceptronic C150APRA2
Manual do utilizador
Parabéns pela compra do seu
modem router ADSL sem fios da Conceptronic.
Este manual de utilizador fornece-lhe uma explicação passo-a-passo sobre como instalar e usar o modem
router ADSL sem fios da Conceptronic.
Se precisar de mais informação ou suporte para o seu produto, aconselhamo-lo a visitar a nossa página
Web Service & Support em www.conceptronic.net/support e a seleccionar uma das seguintes opções:
FAQ : Base de dados das Perguntas Mais Frequentes
Downloads : Manuais, controladores, firmware e mais transferências
Contact : Contacte o suporte da Conceptronic
Para informações gerais sobre os produtos da Conceptronic visite a página Web da Conceptronic em
www.conceptronic.net.
A informação contida neste manual de instalação rápida baseia-se no Windows 7 e no Windows Vista, mas
pode ser diferente do seu computador se estiver a usar um sistema operativo diferente.
Nota: Este manual de utilizador só explica os passos básicos para colocar o modem router ADSL sem fios
a funcionar. Para mais informações sobre as várias funções do modem router ADSL sem fios,
consulte o manual do utilizador alargado (só em inglês) no CD-ROM do produto.
Índice
1. Conteúdo da embalagem
2. O modem router ADSL sem fios
2.1. Painel frontal
2.2. Painel traseiro
3. Instalação do hardware
3.1. Porta DSL (telefone)
3.2. Porta(s) LAN
4. Configuração do computador
4.1. Configuração do seu endereço IP
4.2. Verificar a sua ligação
5. Configuração do modem router
5.1. Predefinições de fábrica
5.2. Configuração com base na web
5.3. Assistente de configuração
6. Ligação à rede sem fios
6.1. Ligar manualmente no Windows 7
6.2. Ligar manualmente no Windows Vista
6.3. Ligar automaticamente com WPS
7. Configuração manual da segurança sem fios
8. Configurar regras de reencaminhamento de
portas
9. Reiniciar o sistema
PORTUGUÊS
145
1. Conteúdo da embalagem
Existem os seguintes elementos na embalagem do modem router ADSL sem fios da Conceptronic:
Modem router ADSL sem fios da Conceptronic (C150APRA2)
Antena para ligações sem fio
Fonte de alimentação 12 V CC, 800 mA
Cabo de rede (LAN)
Cabo de telefone RJ 11
CD-ROM do produto
Este manual de utilizador multilingue
Garantia e Declaração de conformidade CE
2. O modem router ADSL sem fios
2.1 Painel frontal
Descrição Estado Explicação do estado
A Luz de alimentação DESLIGADA A alimentação está DESLIGADA
LIGADA - VERDE A alimentação está ligada e a inicialização é normal
LIGADA - VERMELHA O dispositivo está a arrancar
LIGADA A PISCAR A decorrer actualização de firmware
B Luz ADSL DESLIGADA Falha no teste automático inicial
LIGADA A PISCAR O dispositivo está a detectar o sinal DSL
LIGADA CONTÍNUA Sinal DSL detectado, teste automático bem
sucedido
C Luz de Internet LIGADA - Vermelha Sem ligação DSL
LIGADA - Verde Ligação à Internet disponível
D Luzes LAN DESLIGADAS A Porta LAN não está ligada
(1, 2, 3, 4) LIGADAS CONTÍNUAS Há um dispositivo ligado à porta LAN
LIGADAS A PISCAR Estão a ser transmitidos dados
E Luzes WLAN DESLIGADAS A LAN sem fios está desligada
LIGADAS CONTÍNUAS A LAN sem fios está activa e normal
LIGADAS A PISCAR Actividade de LAN sem fios (a enviar ou a receber
dados)
F Luz WPS DESLIGADA WPS (Wi-Fi Protected Setup) inactivo
LIGADA A PISCAR WPS activo, podem ser adicionados novos clientes
WLAN
LIGADA CONTÍNUA Cliente WPS adicionado com sucesso
PORTUGUÊS
146
2.2 Painel traseiro
Descrição Explicação
A Ligação da antena Ligar a antena incluída ao modem router.
B Porta DSL Ligar a sua linha ADSL ao modem router.
C Portas LAN (1 a 4) Ligar os/s seu/s computador/es ou dispositivo/s de rede ao modem router.
D Ficha de alimentação Ligar a fonte de alimentação ao modem router.
E Reset Fazer uma reposição de fábrica (segurar).
F Botão WLAN / WPS Pressão breve (1 segundo) : Ligar ou desligar o WiFi.
Pressão longa (> 3 segundos) : Iniciar a configuração da tecnologia por
Botão WPS.
G Botão de alimentação Ligar e desligar o modem router.
PORTUGUÊS
147
3. Instalação do hardware
Ligue a antena incluída à respectiva ficha [A] na parte de trás do modem router.
Ligue a fonte de alimentação à ficha de alimentação [D] na parte de trás do modem router e a uma
tomada de parede disponível.
Prima o botão de alimentação [G] na parte de trás do modem router.
A luz de alimentação na parte da frente do modem router acende e o modem router faz um arranque do
sistema.
3.1 Porta DSL (telefone)
A maioria dos fornecedores de ADSL precisa de um divisor entre a sua linha telefónica e o modem ADSL
para impedir que a linha ADSL interfira com serviços telefónicos normais. A não utilização desse divisor
pode levar a problemas de ligação ou de mau desempenho.
Nota: O C150APRA2 não é entregue com um divisor para a ligação ADSL. Por favor, contacte o seu
fornecedor de internet ou telefone para obter o divisor ADSL correcto.
As portas de ligação de um divisor ADSL estão habitualmente etiquetadas da seguinte forma:
Line : Esta porta liga-se à tomada de parede
ADSL : Esta porta liga-se ao router
Phone : Esta porta liga-se a um telefone ou a outro equipamento telefónico
Assegure-se de que os cabos estão bem ligados. Se não conseguir o sinal de marcação no telefone,
verifique as ligações para se certificar que os cabos estão bem metidos e ligados à porta correcta.
Use um cabo de telefone para ligar o modem router ADSL sem fios da Conceptronic (B) à sua linha de
telefone analógica local (ou divisor). A luz ADSL acende quando se detectar um sinal ADSL.
Nota: Se a luz ADSL na parte da frente não acender, assegure-se de que:
- O modem router ADSL sem fios está ligado (a luz de alimentação deve estar acesa).
- Existe sinal ADSL na linha.
- A luz de Internet só fica verde quando se introduzirem dados DSL e de conta de utilizador
correctos na Interface Web do modem router ADSL.
3.2 Porta(s) LAN
Ligue o cabo de rede (LAN) a uma das quatro portas LAN no painel traseiro do modem router ADSL sem fios
e à placa de rede do seu computador.
A luz LAN da porta LAN utilizada acende, indicando que o computador está ligado. (O seu computador
deve estar ligado e a ligação LAN deve estar activada.)
PORTUGUÊS
148
4. Configuração do computador
4.1 Configuração do seu endereço IP
O C150APRA2 está equipado com um servidor DHCP incorporado. O servidor DHCP atribui automaticamente
Obtain an IP
address automatically
Por defeito, a maioria dos computadores está configurada para obter um endereço IP automaticamente.
Quando não for esse o caso, tem de configurar o seu computador para obter um endereço IP
automaticamente seguindo as instruções seguintes. Estas instruções baseiam-se no Windows Vista com o
Service Pack 1. Se o seu computador tiver uma versão ou sistema operativo diferente, os passos podem ser
diferentes.
A. Start Run”
(Executar).
B. NCPA.CPL
OK
Network Connections
C. Local
Area Connection
ou sem fios, dependendo da ligação que usar) e
Properties
B
C
B
PORTUGUÊS
149
A janela das Propriedades da Ligação de Área Local aparece.
D. Internet Protocol Version 4
(TCP/IPv4)
versão 4 (TCP/IPv4)) e clique em
Properties” (Propriedades).
A janela de Propriedades do Protocolo de Internet Versão 4 (TCP/IPv4) aparece.
E. Obtain
an IP address automatically
endereço IP automaticamente) e clique
OK
F. OK
de Ligação de Área Local para guardar as
configurações.
D
D
E
E
PORTUGUÊS
150
4.2 Verificar a sua ligação
Com a Linha de Comandos do Windows pode verificar se recebeu um endereço IP correcto na sua ligação
de área local (com ou sem fios). Este exemplo baseia-se no Windows Vista com o Service Pack 1. No
Windows Vista precisa de ter direitos de administrador para realizar os passos seguintes. Há uma
explicação sobre como conseguir direitos de administrador.
A. Start All Programs Accessories
clique com o botãCommand PromptRun
as administrator
Continue” (Continuar).
A Linha de Comandos aparece. Certifique-se de que no título da Linha de comandos está escrito
Administrator: Command Prompt”. Quando não aparecer a palavra “Administrator” (Administrador),
significa que você não tem os direitos de administrador necessários para realizar estes passos e deve
voltar a realizar o passo A.
B. IPCONFIGENTER.
Deverá ver a seguinte informação:
Endereço IPv4 : 192.168.0.xxx (em que xxx pode variar entre 100 ~ 199).
Máscara Subnet : 255.255.255.0
Porta de ligação predefinida : 192.168.0.1
Se a informação mostrada antes coincidir com a sua configuração, pode prosseguir com a configuração do
aparelho no Capítulo 5.
Se a informação apresentada não coincidir com a sua configuração (i.e., o seu endereço IP for o
169.254.xxx.xxx), por favor verifique as opções seguintes:
1. Desligue e volte a ligar o aparelho.
2. Volte a ligar o cabo LAN ao aparelho e ao seu computador.
3. Renove o endereço IP do seu computador com os seguintes comandos:
- IPCONFIG /RELEASErecto.
- IPCONFIG /RENEW
B
PORTUGUÊS
151
Se os passos anteriores não resolverem o problema do endereço IP, pode repor as configurações
predefinidas de fábrica no aparelho com o botão Reset na parte de trás do aparelho.
Pressione e segure o botão Reset durante +/- 15 segundos para repor as configurações predefinidas de
fábrica. Quando a luz de Estado estiver novamente activa, repita o passo B para renovar o seu endereço
IP.
Nota: Se o problema persistir, verifique se todos os cabos estão correctamente ligados. A porta ADSL
deveria estar ligada à linha ADSL e a porta LAN ao computador.
3
3
PORTUGUÊS
152
5. Configuração do modem router
Este capítulo descreve a configuração do C150APRA2 através do Assistente de Iniciação Rápida incluído.
Depois de completar os passos descritos neste capítulo, o seu router fica configurado para uma ligação
ADSL e poderá ligar-se à internet.
5.1 Predefinições de fábrica
O C150APRA2 vem pré-configurado com várias definições. As definições pré-configuradas encontram-se nos
pontos seguintes:
Endereço IP : 192.168.0.1 (Servidor DHCP para clientes LAN/WLAN activados)
Nome de utilizador : admin (seleccione este utilizador)
Palavra-passe : admin (minúsculas)
SSID sem fios : C150APRA2
Canal sem fios : Canal 6
Segurança sem fios : WPA2
UPnP : desactivada (pode ser activada quando a ligação à Internet estiver configurada)
Quando alterar definições na configuração do C150APRA2, estas são guardadas na memória do router. Para
repor as configurações predefinidas de fábrica, carregue e segure o botão reset na parte de trás do
aparelho durante +/- 15 segundos.
5.2 Configuração com base na web
A configuração do seu C150APRA2 é com base na web. Vai precisar de um navegador para configurar o
aparelho.
Nota: Para configurar o router é aconselhável usar uma ligação por cabo LAN para o aparelho em vez de
uma ligação sem fios.
A. Abra o seu navegador (como por exemplo: Internet Explorer, FireFox, Safari ou Chrome).
B. Introduza o endereço IP do aparelho na barra de endereços do seu navegador (por defeito:
http://192.168.0.1/).
C. Primeiro, aparece uma janela de início de sessão que lhe pede um nome de utilizador e uma
admin a palavra-passe para
adminLogin
configuração com base na web.
PORTUGUÊS
153
Quando o Nome de Utilizador e a Palavra-passe estiverem correctos, o router apresenta a página
overviewmo):
overview
C150APRA2.
PORTUGUÊS
154
5.3 Assistente de configuração
Pode configurar a ligação à Internet do C150APRA2 através do assistente incorporado. Este assistente vai
ajudá-lo a configurar as definições passo a passo.
Nota: Antes de iniciar o Assistente de Iniciação Rápida, assegure-se de que tem todas as informações
disponíveis sobre a sua configuração de Internet. (Por exemplo: informação de conta, tipo de
ligação, etc.)
A. CQuick Start
Web.
B. Setup Wizard
(Assistente de Configuração).
C. O ecrã de boas-vindas apresenta
uma lista dos quatro passos do
assistente. Clique em “Next”
(Seguinte) para continuar.
D. O modem ADSL vai detectar a data
e hora correctas quando estiver
ligado à Internet. Isto só vai ser
usado para o início de sessão. Pode
escolher o fuso horário e as datas da
hora de Verão. Quando terminar,
prima Nexte).
PORTUGUÊS
155
E. Seleccione o seu país e o
Fornecedor de Serviços de Internet.
As configurações correctas para a
sua ligação à Internet vão ser
aplicadas. Isto pode ser modificado
mais tarde.
Quando usar ligações à Internet
PPPOE ou PPPOA, use o nome de
utilizador e a palavra-passe que
recebeu do seu Fornecedor de
Serviços de Internet.
Quando terminar, prima Next
(Seguinte).
F. Pode activar ou desactivar a sua
Rede Sem Fios (por defeito está
activada). O modem router mostra-
C150APRA2
também pode esconder o SSSID.
Vem pré-configurado com uma
chave de segurança WPA2-PSK
única.
Nota: Pode encontrar a chave de
segurança pré-configurada na
parte de baixo do modem
router.
Pode manter a chave tal como está
na Interface de Utilizador ou alterá-
la para a Chave Pré-partilhada que
preferir.
Quando terminar, prima Next
(Seguinte).
PORTUGUÊS
156
G. Depois de concluir a configuração
da LAN Sem Fios vai poder ver o
Setup Summary
das configurações.
Quando estiver pronto prima
Applyicar).
O seu dispositivo vai agora ser
configurado e a sua ligação à
Internet vai ficar pronta a usar.
PORTUGUÊS
157
6. Ligação à rede sem fios
Existem duas formas diferentes de se ligar sem fios à rede do modem router:
- Manualmente.
- Automaticamente através da função WPS.
Quase todas as marcas ou tipos de placas sem fios usam uma aplicação de cliente diferente. Consulte o
manual da sua placa de rede sem fios para obter informações sobre como criar uma ligação com uma rede
sem fios.
6.1 Ligar manualmente no Windows 7
No exemplo seguinte, usa-Connect to a Network
A. Network
barra de tarefas para ver a lista de
ligações de rede sem fios disponíveis.
B. C150APRA2
Connect
Connect
automatically
já está seleccionada. Isto assegura que a
ligação é estabelecida automaticamente
sempre que ligar o seu computador. Se
não quiser que isso aconteça, pode
desseleccionar esta opção antes de clicar
Connect
NOTA IMPORTANTE!
Por defeito, o router sem fios está protegido com encriptação WPA-PSK/WPA2-PSK (modo misto).
Pode encontrar a frase chave WPA única no autocolante do seu modem router.
PORTUGUÊS
158
C. Introduza a frase-chave WPA predefinida
(que pode encontrar na base do router
Security key
Ok
D. O cliente vai agora iniciar a ligação à
rede sem fios.
E. Para verificar o estado da ligação sem
Network
(Rede) na bandeja de sistema. Aí vai ver
a que rede está ligado nesse momento, o
acesso que tem e a força do sinal da
ligação.
PORTUGUÊS
159
6.2 Ligar manualmente no Windows Vista
No exemplo seguinte, usa-Connect to a Network
Vista com o Service Pack 1.
A. Network
na bandeja de sistema e clique
Wireless networks are
available” (Estão disponíveis
redes sem fios).
B. C150APRA2
Connect
(Ligar).
C. Introduza a frase chave WPA
predefinida (que pode encontrar
na base do C150APRA2) no campo
Security key or passphrase
(Chave de segurança ou frase
Connect
(Ligar).
PORTUGUÊS
160
D. Depois de a ligação ser
estabelecida, pode escolher
guardar a rede e iniciá-la
automaticamente sempre que
ligar o computador. Clique em
Close
assistente de ligação.
E. Para verificar o estado da ligação
sem fios, pode clicar no ícone
Network
sistema. Aí vai ver a que rede
está ligado nesse momento, o
acesso que tem e a força do sinal
da ligação.
PORTUGUÊS
161
6.3 Ligar automaticamente com WPS
O modem router suporta a especificação WPS (Wi-Fi Protected Setup). O WPS é um standard para montar
uma rede sem fios de forma fácil e segura. Com o WPS pode configurar e proteger a sua rede sem fios em
apenas alguns passos.
Nota: Para usar WPS com o modem router, precisa de ter um cliente sem fios que suporte WPS. Se tiver
um ou mais clientes sem fios que não suportem WPS, é aconselhável fazer a ligação de forma
manual ao modem router usando a chave WPA pré-configurada tal como se vê na base. Consulte
os capítulos 6.1 ou 6.2 sobre como ligar à rede sem fios de forma manual.
Nota: Para mais informação (técnica) acerca do WPS, visite a seguinte página web:
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
Com a tecnologia WPS por Botão, pode ligar um cliente sem fios ao modem router carregando num botão
em cada dispositivo.
A tecnologia WPS por Botão requer um botão (virtual) no seu cliente sem fios para estabelecer uma
ligação entre o modem router e o cliente sem fios.
Alguns clientes sem fios usam um botão real para activar a tecnologia WPS por Botão; outros clientes sem
fios usam um botão virtual no respectivo software.
Siga os passos seguintes para activar e estabelecer uma ligação WPS com a tecnologia por Botão:
A. Prima o botão WPS na parte detrás do modem router, e a luz WPS começa a piscar indicando que a
autenticação WPS começou.
B. Carregue no botão WPS no cliente sem fios. Este botão pode ser real no hardware ou pode ser um
botão virtual no software do cliente sem fios.
Nota: O modem router vai manter a autenticação WPS activa durante 120 segundos. Durante este
processo, a luz WPS vai piscar. Se não se estabelecer uma ligação WPS dentro de 120 segundos, a
luz apaga-se e a autenticação WPS é interrompida.
Se a autenticação WPS for bem sucedida, a luz WPS fica acesa para indicar uma ligação bem sucedida.
O cliente sem fios está agora ligado à rede sem fios protegida do modem router.
Pode adicionar mais clientes sem fios sem perder a ligação aos clientes sem fios ligados anteriormente. Se
quiser adicionar mais clientes sem fios, tem de repetir os passos A e B.
PORTUGUÊS
162
7. Configuração manual da segurança sem fios
Este capítulo descreve como proteger manualmente a ligação sem fios do C150APRA2. Para evitar o acesso
não autorizado à sua rede, é necessário protegê-la.
Siga os passos seguintes para configurar manualmente a segurança sem fios.
A. Entre no sistema do C150APRA2 conforme se descreve no Capítulo 5.2.
B. WirelessWireless Security
lado esquerdo.
PORTUGUÊS
163
C. Security Mode
Nota: Auto (WPA ou WPA2)
alto nível de segurança (WPA2), mantendo retrocompatibilidade com clientes que apenas suportam
WPA.
D. WPA Encryption
Nota: TKIP+AESe encriptação
(AES), mantendo retrocompatibilidade com clientes que apenas suportam TKIP.
E. Pre-shared Key-partilhada).
F. Apply
Nota: Fixe ou aponte a informação de segurança introduzida. Vai precisar dela quando quiser ligar um
cliente sem fios ao C150APRA2.
Pode agora utilizar as configurações que definiu para ligar o seu cliente sem fios ao C150APRA2, conforme
se descreve no Capítulo 6.1 e Capítulo 6.2.
PORTUGUÊS
164
8. Configurar regras de reencaminhamento de portas
O C150APRA2 da Conceptronic está equipado com um firewall incorporado para impedir ataques da
Internet à sua rede. Este firewall bloqueia automaticamente todo o tráfego de entrada nas portas não
usadas. Quando uma porta bloqueada é necessária para um serviço ou aplicação (por exemplo: um
servidor FTP ou um servidor WEB), pode criar uma regra de reencaminhamento nas páginas de
configuração para reencaminhar o tráfego.
Nota: O C150APRA2 da Conceptronic suporta Universal Plug & Play (UPnP), o que possibilita que
aplicações e dispositivos compatíveis com UPnP, como consolas de jogos, abram automaticamente
as portas necessárias sem que seja necessária qualquer configuração manual. Contudo, o UPnP
também torna o seu ambiente de rede mais vulnerável a ataques. Se usar aplicações que estejam
Advanced
(Avançadas) Network Tools UPnP
Abaixo encontra uma lista de algumas portas utilizadas regularmente e as aplicações que lhes
correspondem.
Porta Aplicação Porta Aplicação
20 FTP data (Servidor FTP)
21 FTP (Servidor FTP)
22 SSH (Secure Shell)
23 Telnet
25 SMTP (Servidor de correio Saída)
80 HTTP (Servidor Web)
110 POP3 (Servidor de correio Entrada)
2000 Remotely Anywhere
5800 VNC
5900 VNC
Para mais portas e as suas correspondes aplicações, consulte: http://portforward.com/cports.htm
Nota: Quando usar regras de reencaminhamento de portas, é aconselhável configurar o(s)
computador(es) com um endereço IP fixo em vez de um endereço IP dinâmico.
Nota: Para informação detalhada sobre o reencaminhamento de portas e as opções DMZ, consulte o
Manual do Utilizador Alargado (só em inglês) no CD-View Extended
User Manual
A. Entre no sistema do C150APRA2 conforme se descreve no Capítulo 5.2.
B. Clique Advanced
C. Port Forwarding
A configuração de reencaminhamento de portas vai aparecer no seu ecrã.
PORTUGUÊS
165
Nota: Na imagem anterior, pode ver um exemplo de configuração de reencaminhamento de portas.
D. Add
PORTUGUÊS
166
E. Select a Service
ou introduza um novo nome de serviço para a sua regra de reencaminhamento de portas no campo
Custom Server
F. Introduza o endereço IP do computador que está a usar a regra de reencaminhamento de portas no
Server IP Addressvidor).
G. External Port Start
External Port Endfinal).
H. Seleccione um protocolo ou a sua regra de reencaminhamento de portas na lista desdobrável
ProtocolTCPUDPBoth
Nota: Both
(Ambos). Esta opção vai passar tanto o tráfego TCP como o tráfico UDP para o endereço IP
configurado do seu computador ou servidor.
I. Introduza as portas que têm de estar acessíveis no seu computador na rede local nos campos
Internal Port StartInternal Port End
J. Applyardar a regra de reencaminhamento de portas.
A regra adicionada fica agora visível na lista de reencaminhamento de portas.
Para criar mais regras de reencaminhamento de portas, repita os passos D a J.
PORTUGUÊS
167
9. Reiniciar o sistema
Quando alterar as definições da configuração do modem router, estas são directamente aplicadas e
activadas. No entanto, é aconselhável reiniciar o C150APRA2 depois de fazer alterações grandes e
importantes na configuração de modo a assegurar-se de que todas as configurações são correctamente
aplicadas.
A. Entre no sistema do C150APRA2 conforme se descreve no Capítulo 5.2.
B. Management
C. System Management
D. Rebootr) para reiniciar o C150APRA2.
Durante o reinício, aparece uma barra de progresso no seu ecrã.
Espere até a barra de progresso estar concluída antes de voltar a iniciar a sessão.
O seu C150APRA2 já está pronto a usar!
Nota: Para uma explicação detalhada sobre as características e configurações disponíveis no
C150APRA2, consulte o Manual do Utilizador Alargado (só em inglês) no CD-ROM do produto.
View Extended User Manual
execução automática.
APPENDIX
168
License Agreement
This Conceptronic product C150APRA2 includes copyrighted third-party software licensed under the terms of the GNU
General Public License. Please see The GNU General Public License for the exact terms and conditions of this license.
Availability of source code
Conceptronic. has eposed the full source code of the GPL licensed software, including any scripts to control compilation and
installation of the object code. All future firmware updates will also be accompanied with their respective source code. For
more information on how you can obtain our open source code, please visit our web site.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software--to make sure the software
is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any
other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU
Library General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you
receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs;
and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty
for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what
they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of
a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have
made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
APPENDIX
169
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may
be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work,
and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a
work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as
"you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The
act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a
work based on the Program (independent of having been made by running the Program). Whether that is true depends on
what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of
the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for
such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright
notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute
the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an announcement, your work based on the Program is not required to
print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms,
do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as
part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License,
whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code,
to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
APPENDIX
170
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source
code distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights, from you under this License will not have
their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or
works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may
not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for
enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this
section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this
section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by
public license practices. Many people have made generous contributions to the wide range of software distributed through
that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
APPENDIX
171
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve
this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where
the full notice is found.
, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is
what you want to do, use the GNU Library General Public License instead of this License.
APPENDIX
172
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries-
-of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think
carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular
case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that
you receive source code or can get it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library
or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights
that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the
library, you must provide complete object files to the recipients, so that they can relink them with the library after making
changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives
you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the recipients should know that what they have is not the original
version, so that the original author's reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of
use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU
Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General
Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax
criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-
free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
APPENDIX
173
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so
that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain
by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version
of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference
between a "work based on the library" and a "work that uses the library". The former contains code derived from the
library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License
(also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work
based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing
the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another
language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of
this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any
change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
APPENDIX
174
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that
uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort
to ensure that, in the event an application does not supply such function or
table, the facility still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms,
do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as
part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License,
whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of
the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General
Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in
these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used
for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access
to copy the source code from the same place satisfies the requirement to distribute the source code, even though third
parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the
Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered
by this License.Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not. Whether this is true is especially
significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is
not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small
inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally
a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the
Library itself.
APPENDIX
175
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to
produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the
terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use
are covered by this License. You must supply a copy of this License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the
copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an
executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code
and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing
the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not
necessarily be able to recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run
time a copy of the library already present on the user's computer system, rather than copying library functions into the
executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the
modified version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy
the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other
library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution
of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these
two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will
automatically terminate your rights under this License. However, parties who have received copies, or rights, from you
under this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or
works based on it.
APPENDIX
176
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions.
You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity
of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system
which is implemented by public license practices. Many people have made generous contributions to the wide range of
software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies
to it and "any later version", you have the option of following the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Library does not specify a license version number, you may
choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conceptronic adsl2 router modem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conceptronic adsl2 router modem in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info