431477

Conceptronic adsl2 router modem Manual

28
Zoom out
Zoom in
Previous page
1/176
Next page
ENGLISH
28
3. Hardware Installation
Connect the included antenna to the antenna connection [A] on the back of the modem router.
Connect the power supply to the power connection [D] on the back of the modem router and to an
available wall socket.
Press the power [G] button on the back of the modem router.
The power LED on the front of the modem router will light up and the modem router will perform a
system startup.
3.1 DSL (Telephone) port
Most ADSL providers require a splitter between your phone line and the ADSL modem that prevents the
ADSL line from interfering with regular telephone services. Not using such a splitter could lead to
connection problems or bad performance.
Note: The C150APRA2 is not delivered with a splitter for the ADSL connection. Please contact your
telephone or internet provider for the correct ADSL splitter.
The connection ports of an ADSL splitter are typically labelled as following:
Line : This port connects to the wall jack
ADSL : This port connects to the router
Phone : This port connects to a telephone or other telephone device
Make sure the lines are properly connected. If you are unable to hear a dial tone with the telephone,
check the connections to make sure the cables are securely attached and connected to the correct port.
Use a telephone cable to connect the Conceptronic wireless ADSL modem router (B) to your local analog
telephone line (or splitter). The ADSL led will light up when an ADSL signal has been detected.
Note: If the ADSL LED on the front does not lit up, make sure that:
- The wireless ADSL modem router is powered on (the power LED should burn).
- There is an ADSL signal on the line.
- The Internet LED will only be green when correct DSL and user account settings are applied
into the Web Interface of the ADSL modem router.
3.2 LAN port(s)
Connect the network (LAN) cable to 1 of the 4 LAN ports on the back panel of the wireless ADSL modem
routerand to the network card of your computer.
The LAN LED of the used LAN port will lit up, indicating that the computer is connected. (Your computer
must be switched on and the LAN connection must be enabled).
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conceptronic adsl2 router modem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conceptronic adsl2 router modem in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info