8641

Conceptronic ADSL Router Manual

17
Zoom out
Zoom in
Previous page
1/49
Next page
ENGLISH
- 17 -
If you check this selection, Disable, remember to specify a static IP address, subnet Mask, and DNS setting for each of your
local computers. Be careful not to assign the same IP address to different computers.
¤ Enable: Check to enable the ADSL Router to distribute IP Addresses, subnet mask and DNS setting to computers. Hence,
the following fields will be activated.
Starting IP Address: Enter the starting address of this local IP network address pool. The pool is a piece of continuous IP
address segment. The default value is 192.168.1.100.
Number of DHCP users: Enter the maximum number of computers that you want the DHCP server to assign IP addresses
to. The default value is 100.
With this case, the DHCP pool is from 192.168.1.100 to 192.168.1.199. Therefore, the local computer will get an IP address
located at this range randomly.
If there is already a DHCP server on your LAN, you should disable the router’s DHCP server function in
order to avoid possible conflicts.
3.4.2 WAN
The screens below contain settings for the WAN interface toward Internet.
ISP
There are five ways - PPPoE, PPPoA, RFC1483 routed, IPoA, PPTP-to-PPPoA Relaying - for the device to have a public
IP address and then to access Internet. You have to check with your ISP about which way is adopted.
VPI/VCI: Consult the telephone company to get the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers.
The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535. The default value VPI is 0 and VCI is 32.
NAT: The NAT feature allows multiple-user Internet access for the cost of a single IP account. If you need to have a public
server or a public network, NAT has to be disabled.
Encapsulation Method: Be sure to use the encapsulation method (LLC/SNAP or VC MUX) required by your ISP.
If you disable the ADSL Router’s NAT option, the Virtual Server and VPN functions will be disabled.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conceptronic ADSL Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conceptronic ADSL Router in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info