738056
6
Zoom out
Zoom in
Previous page
1/56
Next page
6
MISCELLANEOUS
Cleaning the PM
Use a cloth lightly dampened with water only. Do not spray with a cleaner or leave in the rain.
Formulas Used
Watts=2.80/(sec/meter)^3
Calories/Hour=Kcal/hr=(watts)x(4)x(0.8604)+300
Do not:
• Opentheplasticcase
• Dropthebatterypack
• Allowbatterypackpinstotoucheach
other or any metal object
• Useifdamagedorleaking
• Trash,incinerate,crush,etc.
Do:
• UseonlyinaPM4;ifnotusedinPM4,storecarefullysopinsarenotshorted
• Keepcleananddry
• Usebetween0˚and40˚C
• Charge(roworski,orplugPM4intoUSB)afterprolongedperiodofnon-use
• Keepbatterypackawayfromchildren
• Recycleproperly
WARNING:Ifbatteriesleak,donotusethem.Batteryuidsarecorrosiveandcandamageeyes,irritateskin,etc.
If contact occurs, wash affected area immediately and thoroughly with water.
Safety Information for PM4 Rechargeable Battery Pack
Port for the optional
Polar™ heart rate
receiver.
Bottom View of PM
Batterycover
PM3
Race system jacks
PM4
Back View of PM
Reset here
Flywheel sensor cable must be connected
here for the PM to operate.
USBportforconnectingto a computer. Beveled
cornersonUSBcableplugfacethebackofthe
monitor. DO NOT FORCE when plugging in.
Seeconcept2.com/pmfor current information.
TROUBLESHOOTING
1. If the PM malfunctions or does not “wake up,” reset PM:
• Insertapen/penciltipintotheresetholeonthebackandpresslightly.
• Removethebatteriesfor30minutesandinserttwonewalkalineD-Cell(LR20)batteries.
2. To change language: press MENU/BACK until screen stops changing. Press fifth grey button on right, then press second grey
button on right twice, and select your language. Alternately, hold down CHANGE UNITS and CHANGE DISPLAY and reset
monitor. You can then select your desired language. (Note: This procedure will reset PM to factory settings.)
3. IfyourcomputerdoesnotrecognizethatyourPM3/PM4isconnectedtoittryoneofthefollowing:
• Useanothercomputerand/orUSBcable.
• RemovebatteriesandUSBcablefor30minutesthenreinsertbatteriesandtryagain.
Refertoconcept2.com/pmformoreinformationandsoftwareupdates.
Batterycompartment:Loosenscrewandpress
thumbstrike in direction shown to open.
PM3
PM4
Notes:
1) Remove batteries or battery pack from the PM3 or PM4
if monitor will not be used for a period of four months or
more.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept2 PM4 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept2 PM4 Monitor in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info