670189
11
Zoom out
Zoom in
Previous page
1/16
Next page
11
MAINTENANCE
WARNING: The safety level of the machine can be maintained only if it is examined regularly for damage
and wear. Replace defective components immediately to ensure safety and performance or keep machine out of
use until repair.
2. Inspect drive cord for wear. The drive cord is a single
cord that is connected to the handle on one end
and the foot carriage on the other end. Inspect the
entire length of the drive cord for wear, including the
section that is inside the shuttle channel, by pulling
the handle all the way out.
Every 50 Hours of Use
Weekly for Institutional Users:
1. Lubricate the chain with a teaspoon of purified mineral
oil, 3-IN-ONE® oil, or 20W motor oil. Apply oil to a paper
towel, and rub the paper towel along entire length of chain.
Wipe off the excess. Repeat if needed. Do not clean the
chain with any kind of cleaner or solvent, e.g. WD-40®.
Daily
Wipe seat and rail assembly
clean with a cloth or non-
abrasive scouring pad after
use. Do not use mineral acids,
bleach or coarse abrasives.
IMPORTANT: To ensure the
quality feel of the foot carriage
rollers on the rail assembly, it
is vital that this area be cleaned
on both sides of monorail
after every use. If this area is
not cleaned regularly, the foot
stretcher movement will feel
bumpy and rough.
New cord.
Acceptable wear.
Still usable.
Excessive wear.
Replace cord.
DYNAMIC
patent pending | concept2.com
pull handle out
RECOMMENDED MAINTENANCE SCHEDULE
1
2
On a Regular Basis
Firmware is the internal software that runs your Performance Monitor. Your PM comes pre-installed with the latest
firmware, however, new and improved versions are offered regularly. We offer free software called the Concept2
Utility that makes it easy to update your PM with the latest firmware version at any time.
Visit concept2.com/pm5firmware for more information.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept2 Dynamic Indoor Rower at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept2 Dynamic Indoor Rower in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Concept2 Dynamic Indoor Rower

Concept2 Dynamic Indoor Rower Installation Guide - English - 3 pages

Concept2 Dynamic Indoor Rower Installation Guide - English - 12 pages

Concept2 Dynamic Indoor Rower User Manual - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info