805555

Concept VS5031 Manual

19
Zoom out
Zoom in
Previous page
1/49
Next page
36 37
VS5031 VS5031
ENEN
ASSEMBLY
ATTENTION!
Pull the power cord out of the socket before assembling or disassembling the unit. The fan may only be used with the
front and rear protective mesh attached (1), (5).
1. Attach the telescopic rod (8) to the base (9).
2. Place the appliance body on the base rod and tighten with a screw.
3. Position the rear protective mesh (5) onto the drive unit so that the pins on the unit correspond with the holes in
the mesh. Use the attachment nut (4) to secure the assembly.
4. Slide the fan (3) onto the motor shaft by positioning the grooves in the fan hub against the shaft tongues.
5. Turn the nut (2) counter-clockwise to fasten the fan.
6. Position the front wire mesh so that the mesh edges fit into the grooves on the inside of the ring.
7. Tighten the fastening ring with the screw.
OPERATING INSTRUCTIONS
Prior to using the unit verify the power cord is intact.
1. Place the appliance on the floor to prevent it from tipping over.
2. Unfold the power cord completely.
3. Set the desired fan angle. You will hear individual stage clicks when setting.
4. Set the desired fan height by loosening the base nut and extending the telescopic rod.
5. Connect the appliance plug to the mains.
6. Switch (C) switches the appliance on.
7. Use the power switch (A) to select the desired fan power (1 = lowest power - 12 = highest power).
8. Press the oscillation button (B) to turn the oscillation on/off.
9. Use the timer button (D) to set the desired ventilation time. From 0.5 to 10 hours at intervals of 0.5 h. From
10 to 12 hours at intervals of 1 h. When the timer function is on, the icon (E) appears on the display to indicate the
active timer.
10. Switch (C) switches the appliance off.
11. After use, unplug the appliance from the mains.
CLEANING AND MAINTENANCE
ATTENTION!
Always disconnect the power cord from the socket before cleaning the unit!
The surface of the unit may only be cleaned with a wet cloth. Do not use any detergents or hard objects as they may
damage the surface of the unit!
The front and rear wire mesh should be cleaned frequently to ensure proper operation of the unit.
Never clean the unit under running water; do not rinse or immerse it in water!
The fan disassembly procedure follows the reverse order of the assembly.
SERVICING
Any extensive maintenance or repair requiring access to the inner parts of the product must be performed by an
expert service centre.
ENVIRONMENTAL PROTECTION
• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household
waste. It must be taken to the collection point of an electric and electronic equipment recycling
facility. By making sure this product is disposed of properly, you will help prevent the negative effects
on the environment and human health that would otherwise result from inappropriate disposal of
this product. You can learn more about recycling this product from your local authorities, a household
waste disposal service or in the shop where you bought this product.
This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to
make these changes.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VS5031 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VS5031 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info