805564

Concept VS5021 Manual

13
Zoom out
Zoom in
Previous page
1/27
Next page
• Never use the unit if the power supply cord or plug is damaged. Have any defects immediately repaired by
an authorized service center.
• Do not use the unit if it does not operate properly, or if it has been dropped, damaged or exposed to liquid.
Take the unit to an authorized service center for testing and repair.
• The unit is not designed for outdoor use.
• The unit is intended for household use only; it is not designed for commercial application.
• Do not touch the unit if your hands are wet.
• Do not immerse the power cord, plug, or unit in water or any other liquid.
• Do not attempt to repair the unit by yourself. Contact an authorized service center for repair.
• This appliance may be used by children 8 years of age and older and by persons with physical or mental
impairments or by inexperienced persons if they are properly supervised or have been informed about
how to use of the product in a safe manner and understand the potential dangers. Children must not play
with the appliance. This appliance may be cleaned by children 8 years of age and older if they are properly
supervised. Keep this appliance and the power cord out of reach of children younger than 8 years of age.
Failure to follow the manufacturer‘s instructions may lead to refusal of warranty repair.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
PRODUCT DESCRIPTION
1 Front wire mesh
2 Nut
3 Fan
4 Mesh attachment nut
5 Rear wire mesh
6 Unit body
7 Stand
8 Mode selector
9 Oscillation selector
ASSEMBLY
ATTENTION!
Pull the power cord out of the socket before assembling or disassembling the unit.
The fan may only be used with the front and rear protective mesh attached (1), (5).
1. Mount the unit body unit onto the support stand.
2. Position the rear protective mesh (5) onto the drive unit so that the pins on the unit correspond with the
holes in the mesh. Use the attachment nut (4) to secure the assembly.
3. Slide the fan (3) onto the motor shaft by positioning the grooves in the fan hub against the shaft
tongues.
4. Turn the nut (2) counter-clockwise to fasten the fan.
5. Position the front wire mesh so that the mesh edges t into the grooves on the inside of the ring.
6. Tighten the fastening ring with the screw.
OPERATING INSTRUCTIONS
Prior to using the unit verify the power cord is intact.
1. Place the unit on a stable surface or oor to avoid tipping over.
2. Uncoil the power cord.
3. Tilt the fan as required (Fig. 1). You will hear several clicks that lock the fan in individual positions.
4. Connect the power cord plug to the wall socket.
5. Use the mode selector to choose the required speed –
0 – OFF, 1 – LOW, 2 – MEDIUM, 3 – HIGH
0 – OFF, 1 – LOW, 2 – HIGH (VS 5020).
6. To turn fan oscillation o while the unit is running, pull out the oscillation selector (Fig. 2). Pushing the
selector in turns oscillation on.
7. After use, turn the mode selector to 0 and unplug the unit from the mains.
g. 1 g. 2
CLEANING AND MAINTENANCE
ATTENTION!
Always disconnect the power cord from the socket before cleaning the unit!
1 2 3 4 5
8
6
9
7
ENEN
2524 VS 5020 | 5021VS 5020 | 5021
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VS5021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VS5021 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info