802929

Concept VP8091 Manual

25
Zoom out
Zoom in
Previous page
1/59
Next page
ENEN
4948 VP8090 | VP8091VP8090 | VP8091
CHECKING THE FULLNESS OF DUST BAG
If the dust bag full indicator is red during operation, replace the dust bag immediately.
Warning: if the suction power is low even after the dust container is emptied, there may be several reasons:
- some of the air passages (hose, telescopic tube, suction opening, brush attachment or other attachments) are
blocked,
- the motor filter is dirty,
- the air outlet filter is dirty.
Check each of these options and fix the problem before using the appliance again. If you are unable to identify the cause
of the problem, take the appliance to your nearest service centre. Never use the appliance if the dust bag full indicator is
completely red during operation, you could irreparably damage the motor.
MAINTENANCE
Accessories and vacuum cleaner can be cleaned with a damp cloth. Never immerse the appliance in water! Do not use
aggressive substances such as solvents or abrasives for cleaning!
REPLACING THE DUST BAG
1. Unplug the appliance, pull the hose out of the suction opening and open the
vacuum cleaner cover.
2. Press the bag holder flap and remove the dust bag (Fig. 3). Discard the paper or
SMS bag. Be careful not to tear it during handling. Only empty and close tightly the
textile bag - it can be reused.
3. Insert a new or emptied bag by sliding its board into the bag holder and lock it in
position with the flap. The bag opening must be aligned with the opening for the
vacuum cleaner hose.
4. Always operate the appliance only if using a dust bag! If you forget to insert the
dust bag or you insert it incorrectly, the appliance motor may be damaged.
5. Close the cover and press it until it clicks.
REPLACING THE FILTERS
• The filters should be cleaned or replaced with visible soiling or when the suction
power of the vacuum cleaner drops. Check them after each use of the vacuum
cleaner.
• To avoid damaging the vacuum cleaner, do not use it without properly fitted filters.
• Unplug the vacuum cleaner before replacing the filters.
• You can purchase suitable filter types from your dealer or order from the manufacturer.
CLEANING AND REPLACEMENT OF THE MOTOR FILTER
1. After disconnecting the flexible hose, open the vacuum cleaner cover.
2. Pull the dust bag out of the holder for better access to the motor filter.
3. Remove the motor filter (Fig. 4). The filter can be cleaned by tapping. If heavily soiled, it can be washed in lukewarm
water and left to dry properly.
4. Insert a clean or new motor filter into the vacuum cleaner and close the vacuum cleaner cover.
Fig. 3
Fig. 4
CLEANING AND REPLACEMENT OF THE AIR OUTLET FILTER
1. Open the air outlet grille at the back of the vacuum cleaner (Fig. 5).
2. Remove the air outlet filter. This filter can be cleaned by mechanical tapping and
cleaning with a soft brush. A much soiled filter can be washed after this step and
cleaned with a soft brush in lukewarm water without detergents. It is important to
let the wet parts dry thoroughly. A wet filter would be depleted by vacuuming! Do
not use a hair dryer for drying!
Note: Wet cleaning can cause more wear on the filter and thereby shortening its
life.
3. Insert a clean or new air outlet filter into the vacuum cleaner and close the air
outlet grille.
TROUBLESHOOTING
Problem Cause Remedy
The motor is not working The plug inserted incorrectly or
insufficiently in the wall outlet.
Check connection of the plug.
The wall outlet is not energized. Check the presence of voltage, e.g.
with another appliance.
The motor stopped
working
Poor or too low airflow, thermal motor
protection has tripped.
Unplug the power cord. Check
and clear the intake and exhaust
air passage, filter cleanliness, and if
necessary, replace the dust bag. Allow
the vacuum cleaner to cool down.
The front cover cannot be
closed.
Dust bag incorrectly inserted. Check the dust bag insertion
Reduction of suction
power
Filled or clogged dust bag. Replace the dust bag.
Filter is clogged. Clean or replace the filter.
Clogged nozzle, tubes or hose. Check and clear the intake and exhaust
air passage.
The vacuum cleaner is
warming up
Warming up of the vacuum cleaner during operation is normal, it is not
amalfunction.
Fig. 5
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept VP8091 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept VP8091 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info