804585
24
Zoom out
Zoom in
Previous page
1/59
Next page
46 47
ENEN
OV5220 OV5220
PRODUCT DESCRIPTION
1 Control panel with display
2 Air outlet
3 Dust lter
4 Water lter
5 Freeze pack
6 Water tank
7 Remote control
1
2
3
4
6
5
7
DESCRIPTION OF THE CONTROL PANEL
A Cooling mode button
B Oscillation button
C Timer button
D ON/OFF button
E Mode setting button
F Airow speed setting button
G Ionization function button
AB. C I D N E F G
J K L
H M
Note: Functions on the control buttons of the control panel correspond to the functions of the buttons on the remote
control.
H Cooling mode indicator
I Oscillation indicator
J High airow speed indicator
K Medium airow speed indicator
L Low airow speed indicator
M Sleep mode indicator
N Natural breeze mode indicator
OPERATING INSTRUCTIONS
Connect the power cord to the mains. The appliance is in standby mode.
ON/OFF button (D)
Press the ON/OFF button to switch o the appliance. After switched on, the appliance starts at low airow speed.
Airow speed setting button (F)
Press this button to change the airow speed in 3 levels (the corresponding indicator always lights up on the display).
Mode setting button (E)
Press this button to choose from 3 saved modes:
1. Basic: no indication on the display. It is necessary to set the airow level manually (this mode is set after starting
the appliance).
2. Sleep: the icon (M) is displayed.
3. Natural breeze: the icon (N) is displayed.
Timer button (C)
Use the timer button to set the required operating time from 0 to 7.5 hours in 0.5-hour intervals.
Ionization function button (G)
Press this button to switch on/o the ionization function.
Oscillation button (B)
Press this button to switch on/o the oscillation function.
Cooling mode button (A)
Press this button to switch on/o the air cooling function.
Note: Always pour water into the water tank before starting the cooling mode!
Filling the water tank with water
Always switch o the appliance and unplug it from the mains before lling or emptying the water tank.
Release the lock of the water tank on the back side of the appliance.
Remove the water tank from the appliance. (In order to completely remove it, you need to release the pump
locks inside the tank and remove the pump. Make sure that the pump is installed in its original position before
reinstalling the tank.)
Fill the water tank with water (we recommend using demineralized water to ensure maximum lifetime of the
appliance).
Make sure that the water level is between the MIN and MAX lines.
Adding ice cubes or freeze packs into the water in the water tank make the air cooling function more ecient (the
freeze packs can be re-frozen and reused).
Make sure that the water level does not fall below the MIN line (applies only in active cooling mode).
We recommend changing the water at least once a week.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept OV5220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept OV5220 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info