1. Plug the dehumidier into an electrical outlet.
2. Press the ON/OFF button.
3. Use the mode button to select the desired mode (automatic, continuous operation, laundry drying, fan).
Automatic mode:
Set the desired humidity to 30-80% and adjust the fan speed level.
Continuous operation:
Automatically sets humidity and fan speed to 1st power level.
Laundry drying:
Automatically sets humidity and fan speed to 2nd power level.
Fan:
Only the fan is on, no dehumidication.
Timer:
Timer can be set for these modes (0-24 h).
HOW TO STOP OPERATION
Press the on/o button to interrupt the power supply, this will stop the operation and all LEDs will go out. (Warning: Do not disconnect the appliance from
the mains during operation. Be sure to turn o the appliance rst and then unplug the power cord. Otherwise it may damage the electrical components and
shorten the life of the appliance.)
CLEANING AND MAINTENANCE
• To prevent electric shock, never connect or disconnect the plug with wet hands.
• Prior to cleaning or maintenance, rst switch the appliance o and disconnect it from the mains.
• To prevent device malfunctions or excessive noises, keep the unit in the upright position.
• Wipe the body of the appliance with a soft, dry cloth.
• Use a soft, damp (well wrung) cloth to remove larger dirt deposits. Never use a damp cloth to clean the control panel.
• To avoid any deformation or cracking, do not use gasoline, thinner or other liquid detergents.
• Chemicals can cause colour changes of the surface of the appliance.
If you are not going to use the appliance for a prolonged period of time:
1. Unplug the unit.
2. Empty the water tank, wipe it with a cloth and return it to the unit.
3. Clean the air lter.
4. Store the unit in upright position in a dark place, do not place it on the side and avoid direct sunlight.
How to empty the water tank
1. Turn o the device.
2. Remove the tank from the unit.
3. Grasp the tank by the handle and move it gently.
4. Tilt the tank and carefully drain water out.
5. Put the tank back in the unit.
Note: Water is collected in the tank during the operation. A full water tank indicator will start ashing indicating that the water tank is full and the dehumidier
automatically stops operating.
Cleaning the lters (Fig. 1-2)
1. Remove the grille with lters on the air inlet.
2. Remove the coarse lter and then the carbon lter from the cover.
3. Rinse the coarse lter under water, dry thoroughly and carefully vacuum the carbon lter.
4. Reinstall the lters in the cover and insert the cover into the appliance.
Warning:
1. The operating temperature of the dehumidier is 5-32 °C. Use the appliance within this temperature range. If you use the device outside the specied
temperature range, the safety fuses will stop the operation. This is normal.
2. If the room temperature is below 5 °C, the humidity is relatively low and the dehumidier cannot be used.
3. The built-in compressor produces heat and it slightly increases the room temperature during operation. This is normal.
4. The dehumidier stops operating as soon as the water tank is full.
5. The dehumidier cannot start or stop the operation itself, in this case check the following steps:
1. Make sure that there is no problem with the plug and the socket.
2. If it seems there is no problem, wait 10 minutes.
3. If the appliance still does not work, contact your dealer.
6. Keep a minimum distance of 15 cm between the openings of the appliance and near objects.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Concept OV2216 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Concept OV2216 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.
The manual is 2.94 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
