805559

Concept KS3020 Manual

24
Zoom out
Zoom in
Previous page
1/61
Next page
46 47
KS3020 / KS3030 KS3020 / KS3030
ENEN
ASSEMBLY
The appliance must not be operated without properly installed feet.
Place the feet on the convector body and fasten them with the screws provided.
USER'S MANUAL  KS3020
• Place the appliance on a stable surface or floor to prevent it from tipping over.
• Unfold the power cord completely.
• Connect the appliance plug to the mains.
• Use the switch (6) to select the desired power 1 – 800 W, 2 – 1200 W or 3 – 2000 W (you
will hear a click when you turn the thermostat on/off).
• With the thermostat button (4) you can set the desired room temperature. When the
heating function is set to 800, 1200 or 2000 W, the appliance will switch on and off
alternately to maintain the selected temperature.
Note: For more accurate temperature settings, follow these steps:
Set the thermostat to maximum temperature. When you reach the desired room
temperature, turn the thermostat button slowly to the left to lower the temperature until
the appliance stops heating (you will hear a click indicating that the thermostat is off).
• Switch the appliance off and disconnect it from the mains after use.
USER'S MANUAL  KS3030
• Place the appliance on a stable surface or floor to prevent it from tipping over.
• Unfold the power cord completely.
• Connect the appliance plug to the mains.
• Use the switch (6) to select the desired power 1 – 1200 W, 2 – 2000 W or 3-turbo – 2000W
(you will hear a click when you turn the thermostat on/off). To achieve the desired room
temperature faster, select the 3-turbo mode – 2000 W, at which the front air outlet grid
(3) is activated.
• With the thermostat button (4) you can set the desired room temperature. When the
heating function is set to 1200, 2000 or 2000 W (turbo), the appliance will switch on and
off alternately to maintain the selected temperature.
Note: For more accurate temperature settings, follow these steps:
Set the thermostat to maximum temperature. When you reach the desired room
temperature, turn the thermostat button slowly to the left to lower the temperature until
the appliance stops heating (you will hear a click indicating that the thermostat is off).
• Switch the appliance off and disconnect it from the mains after use.
PRODUCT DESCRIPTION  KS3020
1. Air outlet grid
2. Air inlet grid
3. –
4. Thermostat controller
5. Thermostat switch indicator
6. Power switch
7. Carrying handle
8. Appliance feet
9. Power cord
PRODUCT DESCRIPTION  KS3030
1. Air outlet grid
2. Air inlet grid
3. Front air outlet grid
4. Thermostat controller
5. Thermostat switch indicator
6. Power switch
7. Carrying handle
8. Appliance feet
9. Power cord
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept KS3020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept KS3020 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info