804420

Concept CP2110 Manual

24
Zoom out
Zoom in
Previous page
1/59
Next page
46 47
ENEN
CP2100 | CP2110 CP2100 | CP2110
2
1
STEAM FLOOR CLEANING
NOTE: Before using the steam cleaner, always sweep or vacuum the floor to remove any
dirt.
IMPORTANT: Do not use the steam cleaner without the textile cover attached to the floor
nozzle.
NOTE: Do not use a carpet glider to clean the floors.
1. Plug the power cord of the appliance into the socket. Press the power button and the
blue steam intensity indicator starts to flash.
2. After a few seconds, the steam intensity indicator lights up blue, which means that the steam cleaner is ready for
use and automatically starts to produce steam.
3. After the steam heats up, use the steam intensity button to select the intensity of the steam produced: LOW for low
steam intensity, MEDIUM for medium steam intensity, HIGH for high steam intensity.
4. Step on the floor nozzle and point the main part of the steam cleaner toward the ground.
5. Move the steam cleaner slowly back and forth, paying special attention to heavy foot traffic areas.
STEAM CARPET CLEANING
NOTE: Before using the steam cleaner, always sweep or vacuum the floor to remove any dirt.
IMPORTANT: Do not use the steam cleaner without the textile cover attached to the floor nozzle.
1. Attach the carpet glider to the floor nozzle.
2. Plug the power cord of the appliance into the socket. Press the power button and the blue steam intensity indicator
starts to flash.
3. After a few seconds, the steam intensity indicator lights up blue, which means that the steam cleaner is ready for
use and automatically starts to produce steam.
4. After the steam heats up, use the steam intensity button to select the intensity of the steam produced: LOW for low
steam intensity, MEDIUM for medium steam intensity, HIGH for high steam intensity.
5. Step on the floor nozzle and point the main part of the steam cleaner toward the ground.
6. Move the steam cleaner slowly back and forth, paying special attention to heavy foot traffic areas.
CAUTION! Use only distilled water to fill the water tank!
Always unplug the appliance when filling it with distilled water, emptying it or when the appliance is not in use.
REPLACING THE WATER FILTER
The water filter helps to filter out minerals contained in water which reduce the efficiency of the steam cleaner. The
filter should be changed every 80-100 hours, depending on the frequency of the use of the appliance. Pour only
distilled water into the steam mop. If you live in an area with hard water, deposits of this water may form on the
heating element, which will then reduce the performance of the cleaner. After each use, remove the water tank and
pour out all the water.
ACCESSORIES
CP2100 - The package includes 1x cleaning cloth and 1x carpet glider
CP2110 - The package includes 3x cleaning cloth and 1x carpet glider
3
PRODUCT DESCRIPTION
1 Handle
2 Steam intensity button
3 Power button
4 Appliance body
5 Carpet glider
6 Water tank
7 Cleaning cloth
OPERATING INSTRUCTIONS
ASSEMBLY
Unpack all parts of the appliance and accessories.
1. Slide the handle into the main unit of the cleaner until it clicks into place (1).
2. Insert the appliance body into the floor nozzle (2).
USE
Before first use
1. Press the water tank release buttons and remove it (3).
2. Pull the water tank cap and open it.
3. Fill the water tank with distilled water. Put the cap back to the water tank. Do not add
any cleaning agents, chemicals or perfumes to the water tank.
4. Re-attach the water tank to the main part of the cleaner and make sure that the water
filter is in place.
5. Attach the textile cover on the bottom side of the floor nozzle.
IMPORTANT: Always unplug the appliance before refilling with distilled water or changing
the textile cover.
NOTE: Before use, wash the textile cover to remove any loose fibres.
1
3
4
6
2
5
7
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept CP2110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept CP2110 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info