586406

Comtel CT-2400 Manual

35
Zoom out
Zoom in
Previous page
1/40
Next page
35
PAIRING
This process is to match the PU with BU so that they can communicate with
each other while no other devices (even baby monitor of identical model) can
interfere withyou or receiving your signal.
The PU and BU are already paired when they are shipped from factory.
However, in case you still encounter interference, perform pairing again to
achieve better privacy
1. Press and hold the down button 2 of PU.
2. Switch on the unit by long press of button 1. The power indicator 3 should
start flashing green. Release both buttons.
3. Press and hold the down button 8 of BU.
4. Switch on the unit by long press of button 7. The power indicator 9 should
start flashing green. Release both buttons.
5. Now press again down button 8 of BU, if pairing is successful, two beep
sound will be heard in PU. The power indicator 3 and 9 of both BU and PU
should show steady green.
6. The baby monitor is now ready for operation and probably a feedback noise
will be heard in speaker 5 of PU.
7. In case the PU and BU cannot communicate with each other, repeat pairing
process again.
OPERATION
Baby unit (BU)
1. Place the BU about 1 m from the crib with the microphone 12 facing towards
the baby. Switch on the unit by long press of button 7, the power indicator
9 will show steady green. If this indicator starts flashing green, the battery
level becomes low. Either replace with new battery or change using the
supplied AC adapter as power supply.
2. Adjust the microphone sensitivity using the button 8 such that the unit will be
set to transmit whenever the microphone 12 picks up a sound at your
desirable loudness level. The transmit indicator 10 will blink every time these
buttons are pressed, more number of blinks means the microphone is more
sensitive to sound (maximum is 5 blinks and minimum is 1 blink). Press to
increase and to reduce microphone sensitivity.
CT-2400_Manual_04.pdf 35 28/4/14 6:03 pm
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comtel CT-2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comtel CT-2400 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info