Manual Comtel CT 1900 (page 6 of 26) (English, German, Dutch, French, Italian, Polish, Spanish)

586411

Zoom out

Zoom in

1/26

-10-

-11-

3. Further requirements

• 864 MHz frequency range for optimal trans-

mission quality

• continuous transmitter sensitivity adjustment

• continuous receiver volume control

• 2 different channels adjustable

• 16 different digital codes adjustable as addi-

tional protection from radio interference

• battery monitoring

• acoustic and visual receiver range alarm

Fig. 1

Transmitter

Aerial

Operation/warning display

Mains socket

Sensitivity regulator

On/Off channel switch selector

Microphone

Fig. 2

Receiver

Aerial

Operation/warning display/

Range alarm display

Loudspeaker

Volume control

On/Off channel switch selector

Charging contacts

LED chain

Fig. 3

Rear view

Rechargeable battery compartment

Digital code changeover switch (DIP-switch)

Fig. 4

Charging station

Mains socket

4. Before start-up

4.1. Setting the digital code

Please check whether both devices are set to

the same channel and to the same digital code

before using the transmitter and receiver. Open

both battery compartment lids to set the digital

code. Pull the battery compartment lid belt clips

downwards until they are audibly released from

the ﬁ xtures and tilt them upwards by approx. 30°

until they can be adjusted. The battery compart-

ment lids are now pushed in the direction of the

arrow and removed from the housing.

You can now change the position of the DIP-

switch (2) (see “

12.

Digital code

combination

table”

) using a ballpoint-pen.

The switch position must be identical in both de-

vices to accomplish a connection.

4.2. Inserting the rechargeable batteries

Position the device with the rear side towards

you, pull the battery compartment lid belt clips

downwards until they are audibly released from

the ﬁ xtures and tilt them upwards by approx. 30°

until they can be adjusted. The battery compart-

ment lids are now pushed in the direction of the

arrow and removed from the housing.

Insert the enclosed Micro rechargeable bat-

teries AAA, while observing the correct polarity

CT-1900 is ideally suitable for monitor-

ing small children, babies or persons in

need of care.

The babyphone unit works on two dif-

ferent frequencies (channels) in the

864 MHz frequency range and there-

fore offers you the comfort of optimal

transmission quality without annoying

cables and disturbing CB- and amateur

radio interference in a periphery of up to

600 m (under optimal conditions).

The unit can be operated independent

of mains supply with the enclosed Micro

rechargeable batteries AAA or with the

enclosed power packs.

The rechargeable batteries must remain

in the devices, if you decide to use the

power packs.

1. Scope of delivery

– 1 x transmitter

– 1 x receiver

– 2 x power packs

– 1 x charging station for receiver

– 6 x Micro rechargeable batteries AAA (3 units

for transmitter and/or receiver each)

– 1 x operating instructions

2. Safety notes

Warranty claims concerning damages are void,

if they are caused by non-observance of these

operating instructions! We are not responsible

for resulting damages! We are not responsible

for damage to property or bodily injuries, which

are caused by inappropriate handling or non-

observation of the safety notes. The warranty

claim is void in such cases.

• Please read the operating instructions before

using the babyphone!

• The operating instructions are an integral part

of the product. They contain important notes

on start-up and handling of the device.

• Keep the enclosed operating instructions for

renewed reading!

• They must be handed over when passing the

device on to third persons.

Content

1. Scope of delivery

..........................

1. Scope of delivery ..........................1. Scope of delivery

2. Safety notes

...............................

3. Further requirements

....................

4. Before start-up

............................

4.1. Setting the digital code

.....................

4.2. Inserting the rechargeable batteries

...

5. Initial operation

............................

5.1. Transmitter

......................................

5.1. Transmitter ......................................5.1. Transmitter

5.2. Receiver

..........................................

5.2. Receiver ..........................................5.2. Receiver

6. Functional test

.............................

6. Functional test .............................6. Functional test

7. Battery monitoring

.......................

8. Charging the rechargeable batteries

8.1. Charging the receiver battery

............

8.1. Charging the receiver battery ............8.1. Charging the receiver battery

8.2. Charging the transmitter battery

........

8.2. Charging the transmitter battery ........8.2. Charging the transmitter battery

9. Consumer note

............................

10. 864 MHz technology

.....................

10. 864 MHz technology .....................10. 864 MHz technology

11. Digital coding

..............................

12.

igital code

combination table

.........

13. Range

.......................................

14. Range alarm

...............................

15. Belt clip/suspension arrangement

...

16. Tips und tricks in case of problems

...

17. Important information

...................

Notes on Disposal

.........................

Notes on Disposal .........................Notes on Disposal

. Care and warranty

........................

. Care and warranty ......................... Care and warranty

20. Technical data

.............................

Operating instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Comtel CT 1900 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Comtel CT 1900 Manual

Product: