820048
11
Zoom out
Zoom in
Previous page
1/22
Next page
20 21
E: START A STIMULATION PROGRAM
After selected the desired level or electrode placement (if level option in setting is off), the next
interface is the stimulation interface, refer to below picture. Take program “Endurance1” as an
example, follow below steps:
At this point, four LEDs under channel buttons and LEDs around the central confirmation button
would be on and blink. Four small arrows icon “ “ will display and flash on the screen which
indicate you shall select one or other certain corresponding channels. The buttons would act as
above picture showing.
After user selected certain channel, the corresponding LED would stop blink and kept on, the
arrow would become to a semicircle icon “ “ , that means the corresponding channel is selected.
Of course, user can select up to four channels at a time, see below picture.
A. Select desired level
B. Confirm your selection
C. Return to previous step
B
A A A A
1: SELECT THE CHANNEL
would be on and blink. Four small arrows icon “ “ will display and flash on the screen which
arrow would become to a semicircle icon “ “ , that means the corresponding channel is selected.
After user choose the desired channel, press “the central confirmation button” to confirm
your selections then follow the tips on screen “press up to start” to press the UP key to start a
stimulation session, the intensity will be added from 0. Refer to below pictures.
Note if certain channel was not selected during in previous step, the corresponding button would not
act to “Activate / inactivate” the channel state. Above picture shows four channel are all activated.
1. Warm up phase
2. Work ramp up phase
3. Work steady phase
4. Work ramp down phase
5. Relax ramp up phase
6. Relax phase
7. Relax ramp down phase
8. Recovery phase
9. Number of work performed / Total number of works
10. Time remained for performing the stimulation session
11. Pop-up help indicating information or actions to be taken
12. Intensity of each channel. Each channel can add the
intensity up to 999. Note that on this screen only
channel 1 is selected.
A. Start stimulation
B. Return to the previous step
C. Activate/inactivate the
corresponding channel
A. Increase the intensity
B. Decrease the intensity
C. Pause/resume
D. Activate/inactivate
channel state
B
A A A A
2: START STIMULATION
3: DURING STIMULATION
4: DESCRIPTION ABOUT STIMULATION SCREEN
C
D
A
B
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Compex Wired 3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Compex Wired 3.0 in the language / languages: English as an attachment in your email.

The manual is 2.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info