730548
11
Zoom out
Zoom in
Previous page
1/308
Next page
English
11
1. Connections
The electrical impulses generated by
the Compex are transmitted to the
nerves by self-adhesive electrodes. The
choice of the size, the connection and the
correct positioning of the electrodes are
essential factors for ensuring effective and
comfortable stimulation. So they require
particular care. To do all this – and for
information on the recommended
stimulation positions – refer to the pictures
and pictograms in the poster, and to the
“Table with placements of electrodes and
stimulation positions” in chapter VII. The
specific applications contained in chapter
VI also provide useful relevant information.
blue = channel 1 yellow = channel 3
green = channel 2 red = channel 4
It is important to place the electrodes
correctly to the cable connectors; in order
to do so, press strongly the connector to
the electrode until you hear a double click.
Connecting the charger
The Compex has considerable opera-
ting autonomy, as it uses rechargeable
batteries. To recharge them, use the
charger supplied with your device and
connect it to the base of the device,
then plug the charger in a socket.
To recharge the Compex, first
disconnect the electrode cables from
the device.
Before using your stimulator for the
first time, it is always strongly
recommended that you completely
charge the battery to improve its
autonomy and extend its working life.
2. Preliminary settings:
language, light intensity
and sound volume
Before using the unit for the first
time, you should select the working
language of the device which is
displayed on the options screen.
Proceed as per the instructions
described below.
Afterwards, for the greatest comfort,
Compex offers you a number of
setting options (operating language
selection, display contrast setting
and sound volume setting).
To do this, display the options
screen by pressing the “On/Off”
switch on the left of the Compex
and hold it down for a few seconds.
III. DIRECTIONS FOR USE
Before using the unit for the first time, you are strongly advised to take careful note of
the counter-indications and safety measures detailed at the beginning of this manual
(chapter I: “Warnings), as this powerful equipment is neither a toy nor a gadget!
1a Sockets for the four electrode cables
1b Socket for the battery charger
Connecting the electrodes and
cables
The electrode cables are connected
to the stimulator through sockets on
the base of the device.
Four cables can be connected
simultaneously to the four channels
of the device.
For easier use and better identifica-
tion of the four channels, we advise
you to follow the colour of the
electrode cables and the stimulator
sockets:
Fig.1 – Base of device
1a 1a
1b
1a
1a
Vitality-manuel:Vitality-manuel 0706 4/04/08 11:26 Page 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Compex Vitality at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Compex Vitality in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info