Manual Compex Ayre (page 8 of 176) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian)

820621

Zoom out

Zoom in

1/176

GUIDANCE AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC IMMUNITY

The device is intended for use in the electromagnetic environment specified below. The customer or the user

of the device should assure that it is used in such an environment.

IMMUNITY TEST IEC 60601 TEST

LEVEL COMPLIANCE

LEVEL ELECTROMAGNETIC ENVIRONMENT

- GUIDANCE

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 Vrms

150 kHz to 80 MHz

10 V/m

80 MHz to 2.5 GHz

3 Vrms

10 V/m

Portable and mobile RF

communications equipment should

be used no closer to any part of the

device, including cables, than the

recommended separation distance

calculated from the equation

applicable to the frequency of the

transmitter.

Recommended separation distance

d = 1,2√p

d = 1,2√p 80 MHz to 800 MHz

d = 2,3√p 800 MHz to 2,5 GHz

Where P is the maximum output

power rating of the transmitter

in watts (W) according to the

transmitter manufacturer and d is the

recommended separation distance in

meters (m).

Field strengths from fixed RF

transmitters, as determined by an

electromagnetic site survey,a should

be less than the compliance level in

each frequency range.

Interference may occur in the vicinity

of equipment marked with the

following symbol:

NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by

absorption and reflection from structures, objects and people.

A. Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones

and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted

theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an

electromagnetic site survey should be considered. If the measured field strength in the location in which

the device is used exceeds the applicable RF compliance level above, the device should be observed to

verify normal operation. If abnormal performance is observed, additional measures may be necessary,

such as re-orienting or relocating the device.

B. Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Compex Ayre in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1.82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Compex Ayre Manual

Product: