820029
2
Zoom out
Zoom in
Previous page
1/2
Next page
2CONNECT LEAD WIRES
TO DEVICE 3PLACE ELECTRODES
ON SKIN
4TURN DEVICE ON AND
SELECT INTENSITY 6SELECT PULSE WIDTH
The pulse width is adjusted from 50us to 300us.
Press the SET button to enter this menu, then press
the and buttons to adjust the setting.
Unless otherwise instructed, a setting of 70-120us
is suggested.
7SELECT PULSE RATE 8SET THE TIMER
The treatment time is adjustable from 1 to 60 minutes,
or Continuous ( C ). Press the and buttons to
adjust the setting. Your settings will be stored
permanently unless they are adjusted again.
5SELECT
THERAPY MODE
This unit can store 60 sets of operation records. The
total treatment time can store up to 999 hours.
To check and/or delete individual records, press
the MODE button as you turn on the device. The LCD
will show the number of records and operation time.
Press the and buttons to check each record.
To delete a record, press and hold the SET button for
3 seconds.
To check and/or delete the accumulative record,
press the MODE button to switch to this setting. Press
seconds; all of the records will be deleted, followed by
the sound of a beep.
COMPLIANCE METER
Please see page 26 of your TENS 7000™ Instruction Manual for troubleshooting tips.
PROBLEMS WITH YOUR DEVICE?
Steps 1 3 should be performed with the device turned OFF.
Once the unit has been turned ON, do not remove the belt
IMPORTANT!
QUICK REFERENCE GUIDE PAGE 2
There are 5 modes available: Burst, Normal,
Modulation, SD1 and SD2. Press the MODE button
and continue to press until you have reached your
desired setting.
1CONNECT LEAD WIRES
TO ELECTRODES
The stimulation output will increase as the dial is
turned clockwise or to a higher number.
1 = Weaker 8 = Stronger
By turning the
controls clockwise,
the appropriate
channel is switched
on and the indicator
of power (CH1 and
CH2) is revealed in
the LCD.
The pulse rate is adjusted from 2Hz to 150Hz.
Press the SET button to enter this menu, then press
the and buttons to adjust the setting. Unless
otherwise instructed, a setting of 70-120Hz
is suggested.
ON/
Increase
Select one of
the two available
channels and
insert the lead
the socket.
Firmly insert
the end of
the lead wire
pin into the
electrode
connectors.
Make sure the connection is complete and
no bare metal of the pins is exposed.
Remove electrodes
from protective
backing. Keep backing
to properly store
electrodes after use.
Before applying
electrodes, make
sure the skin at the
application site is
clean and dry.
See Electrode Placement Guide for more information.
TENS 7000
3474.21.08.A ©2021 Compass Health Brands Corp.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Compass TENS 7000 - non-rechargeable at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Compass TENS 7000 - non-rechargeable in the language / languages: English as an attachment in your email.

The manual is 1.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Compass TENS 7000 - non-rechargeable

Compass TENS 7000 - non-rechargeable User Manual - English - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info