784352
21
Zoom out
Zoom in
Previous page
1/24
Next page
21
Remote NDIS
based Internet
Sharing Device Micro-
USB
Ethernet card
LAN
Bluetooth Device
(Personal Area
network) Bluetooth
Address Name
1 Antonio Rossi
Ricerca dispositivi da configurare
Inserimento nomi in rubrica
1. Scegli Rubriche/Rubrica nomi
2. Inserire le informazioni necessarie (per ogni contatto è necessario compilare
almeno un “indirizzo” e un “Nome”)
3. Premi “Scrivi pagina” per invare i dati al modulo Touch
Searching for devices to configure
Entering names in the directory
1. Select Directories/Name directory
2. Enter the information required (at least one “Address” and one “Name” need to
be filled out for each contact)
3. Click “Write page” to send the data to the Touch module
Recherche dispositifs à configurer
Saisie des noms dans le répertoire
1. Choisir Répertoires/Répertoire noms
2. Saisir les informations nécessaires (pour chaque contact, remplir au moins une «
adresse » et un « Nom »)
3.
Appuyer sur « Écrire page » pour envoyer les données au module Touch
Te configureren apparaten zoeken
Namen in de lijst invoeren
1. Kies Lijst/Namenlijst
2. Voer de benodigde informatie in (voor elk contact moet er minimaal een “adres
en een “Naam” worden ingevuld)
3.
Druk op “Pagina schrijven” om de gegevens naar de Touch-module te verzenden
Suchlauf der zu konfigurierenden Geräte
Eingabe der Namen in das Verzeichnis
1. Verzeichnisse/Namensverzeichnis wählen
2. Die erforderlichen Informationen ein (für jeden Kontakt muss mindestens eine
Adresse“ und ein „Name“ ausgefüllt werden)
3. „Seite schreiben“drücken, um die Daten an das Touch-Modul zu senden
Búsqueda de dispositivos por configurar
Introducción de nombres en el directorio
Connetti il modulo Touch al computer (vedi pag.15) e apri ViP Manger
In Opzioni (1)/Connessioni locali (2) seleziona la corretta interfaccia di rete (3) in
funzione della modalità di connessione tra computer e modulo touch (Micro-USB, LAN,
Bluetooth). Conferma premendo OK (4).
Premi Scan sistema (5) per avviare la ricerca dei dispositivi.
Conectar módulo pantalla táctil al ordenador (véase pág.15) y abrir ViP Manager
En Opciones (1)/Conexiones locales (2) seleccionar la interfaz de red (3) correcta
en función del modo de conexión entre el ordenador y el módulo pantalla táctil (Micro-
USB, LAN o Bluetooth). Confirmar pulsando OK (4).
Pulsar Explorar sistema (5) para iniciar la búsqueda de dispositivos.
1. Elegir Directorio/Directorio nombres
2. Introducir la información necesaria (para cada contacto se debe indicar al menos
una “Dirección” y un “Nombre”)
3.
Pulsar “Escribir página” para enviar los datos al módulo pantalla táctil
Pesquisa de dispositivos a configurar
Introdução de nomes no directório
Connect the Touch module to the computer (see page 15) and open ViP Manager
In Options (1)/Local connections (2) select the correct network interface (3) in
accordance with the method used to connect the computer and the touch module
(Micro-USB, LAN, Bluetooth). Confirm by clicking OK (4). Click Scan system (5) to
start searching for devices.
Ligar o módulo touch ao computador (consultar a pág. 15) e abrir o ViP Manager
Em Opções (1)/Ligações Locais (2) seleccionar a interface de rede (3) correcta,
consoante o modo de ligação entre o computador e o módulo touch (Micro USB, LAN,
Bluetooth). Premir OK (4) para confirmar.
Premir Análise sistema (5) para iniciar a pesquisa de dispositivos.
1. Escolher Directório/Directório nomes
2. Introduzir as informações necessárias (para cada contacto é necessário
preencher pelo menos um “endereço” e um “nome”)
3. Premir “Guardar página” para enviar os dados para o módulo touch
Поиск настраиваемых устройств
Ввод имен в каталог
Connecter le module Touch à l’ordinateur (voir page 15) et ouvrir VIP Manger
Sous Options (1)/Connexions locales (2) , sélectionner l’ interface de réseau (3)
correspondant à la modalité de connexion entre ordinateur et module tactile (Micro-
USB, LAN, Bluetooth). Confirmer en appuyant sur OK (4).
Appuyer sur Balayage système (5) pour lancer la recherche des dispositifs.
Подключите сенсорный модуль к компьютеру (см. стр. 15) и откройте ViP
Manger.
В разделе Опции(1)/Локальные подключения (2) выберите правильный сетевой
интерфейс (3) в соответствии с режимом подключения между компьютером и
сенсорным модулем (Micro-USB, LAN, Bluetooth). Подтвердите нажатием OK (4).
Нажмите Сканирование системы (5), чтобы начать поиск устройств.
1. Выберите Каталоги/Каталог имен.
2. Введите необходимую информацию (для каждого контакта необходимо
указать хотя бы “Адрес” и “Имя”).
3. Нажмите “Заполнить страницу”, чтобы отправить данные в сенсорный
модуль.
Yapılandırılacak aygıtları arama
İsimleri rehbere girin
Verbind de Touch-module met de computer (zie pag.15) en open ViP Manager
Selecteer bij Opties (1)/Lokale verbindingen (2) de juiste netwerkinterface (3)
afhankelijk van de verbindingsmethode tussen de computer en de Touch-module
(Micro-USB, LAN, Bluetooth). Bevestig met OK (4).
Druk op Systeem scannen (5) om het zoeken naar apparaten te starten.
Touch/dokunmatik modülünü bilgisayarınıza bağlayın (bkz. syf.15) ve ViP
Manger yazılımını açın
Seçenekler (1) / Yerel bağlantılar (2) sekmesinde bilgisayar ve touch/dokunmatik
modülü (Mikro-USB, LAN, Bluetooth) arasındaki bağlantı biçimine göre doğru
arayüzünü (3) seçin. OK (4) tuşuna basarak onaylayın.Cihazları aramaya başlamak için
Sistem tarama (5) tuşuna basın.
1. Rehber/İsimler rehberi seçeneğini seçin
2. Gerekli bilgileri girin (her bir iletişim için en az bir “adres” ve bir “İsim” girmelisiniz)
3. Verileri Touch modülüne göndermek için “Sayfayı yaz” seçeneğine basın
Wyszukiwanie urządzeń do skonfigurowania
Wprowadzanie imion i nazwisk na listę
kontaktów
Verbinden Sie das Touch-Modul mit dem Computer (siehe S. 15) und öffnen
Sie den ViP Manger
Unter Optionen (1)/Lokale Verbindungen (2 ) die richtige Netzwerkschnittstelle
(3) je nach Verbindungsmodus zwischen Computer und Touch-Modul (Micro-USB,
LAN, Bluetooth) wählen. Mit OK (4) bestätigen. Drücken Sie Systemscan (5), um den
Gerätesuchlauf zu starten.
Podłączyć moduł dotykowy do komputera (patrz str. 15) i otworzyć
oprogramowanie ViP Manager
W pozycji Opcje (1)/Połączenia lokalne (2) wybrać prawidłowy interfejs sieciowy
(3) w zależności od trybu połączenia pomiędzy komputerem a modułem dotykowym
(Mikro-USB, LAN, Bluetooth). Potwierdzić naciśnięciem przycisku OK (4). Nacisnąć
przycisk Skanuj system (5), aby uruchomić wyszukiwanie urządzeń.
1. Wybrać opcję Listy kontaktów/Lista imion i nazwisk
2. Wprowadzić niezbędne dane (dla każdego kontaktu konieczne jest wprowadzenie
co najmniej „adresu” i „imienia”)
3. Nacisnąć przycisk „Zapisz stronę”, aby wysłać dane do modułu dotykowego
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comelit Ultra UT9270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comelit Ultra UT9270 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 6.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info