Manual Comelit 8461S (page 5 of 28) (English, German, Dutch, French, Italian, Portuguese, Spanish)

636220

Zoom out

Zoom in

1/28

1209

4893

1214/2C

1216

6302S

6302S/BM

A MAX B MAX C MAX

Comelit Art. 4577 1 mm

(Ø 1,2 mm AWG 17)

200 m

(655 feet)

100 m

(330 feet)

200 m

(655 feet)

UTP5 cat. 5 0,2 mm

(Ø 0,5 mm AWG 24)

100 m

(330 feet)

60 m

(195 feet)

100 m

(330 feet)

0,28 mm

(Ø 0,6 mm AWG 23)

100 m

(330 feet)

60 m

(195 feet)

100 m

(330 feet)

0,5 mm

(Ø 0,8 mm AWG 20)

100 m

(330 feet)

60 m

(195 feet)

100 m

(330 feet)

1 mm

(Ø 1,2 mm AWG 17)

100 m

(330 feet)

60 m

(195 feet)

100 m

(330 feet)

1 mm

(Ø 1,2 mm AWG 17)

80 m

(260 feet)

40 m

(130 feet)

80 m

(260 feet)

1,5 mm

(Ø 1,4 mm AWG 15)

100 m

(330 feet)

60 m

(195 feet)

100 m

(330 feet)

 To send the call from an external unit, touch the button

corresponding to the user you want to contact.

 Press the button (or pick up the handset) to reply to the call.

 Press the button (or hang up the handset) to terminate the

call.

√ Self-ignition is possible only when the system is in standby

 Press the self-ignition button (button 2 by default) to display on

the monitor the image transmitted from the external unit.

 Press the programmed button to send the call

 Press the audio button twice (or hang up the handset and

pick it up again) to terminate the call in progress or establish a

communication with the external unit.

This function can be used to transmit a call to the other units (door

entry monitors and/or door-entry phones) set to the same call

address (for programming, refer to the technical manual for the

respective internal unit).

This function enables the user to call specific internal units (for

programming see the technical manual of the respective internal

unit).

A call from the external unit always takes priority over an intercom

communication. In this case, users who are already speaking will

hear a tone similar to the ringtone, if the call is addressed to them,

or otherwise a triple signalling tone will sound and the video image

from the external unit from which the call was made will appear (in

the case of a main monitor).

» If the system is not busy: The receiver of the call can press

the audio button (or pick up the handset) to communicate

with the caller. Press the audio button again (or hang up the

handset) to terminate the call.

» If the system is busy: the privacy LED will light up (on Smart

6302S monitors, the privacy LED will light up for 4 sec.).

» If the system is not busy:

» On the external unit the caller illumination LED will light up,

the LED will ash and the conrmation tone will sound.

» The video image from the external unit will appear

automatically on the main internal monitor/s.

» The video image can be displayed on secondary

monitors (without answering the call) by pressing button 2

(programmed by default for the self-ignition function).

» If the user responds to the call: the LED will illuminate

on the external unit.

» When responding to a call from the external unit

using a secondary door entry monitor, the image is

automatically displayed on the monitor (and the main

door entry monitor is switched off).

» If the user presses the lock-release control: the LED will

illuminate on the external unit.

» If the system is busy: the LED will ash and the external unit

will emit the system busy tone.

To make a call from an external unit

Self-ignition

GENERAL INTERNAL CALL

SELECTIVE INTERCOM

Operation with additional internal units

Operation

The kit can manage up to a maximum of 4 door entry monitors or

door-entry phones for each call button, including a maximum of 1

main door entry monitor.

MAIN/SECONDARY MONITORS

Operation with additional external units

OPERATION WITH SWITCHING DEVICE ART. 1404 (DEFAULT)

Refer to the technical manual for the external unitArt. 4893 for the

programming of special functions

In the configuration of Art. 1404, the MIN and MAX Dip switches

define respectively the lowest and highest user codes which can

be connected to the riser. For information on setting the desired

values, refer to the table on page 17. Separate switching

devices for different risers must manage code ranges which are

not overlapping. The self-ignition function is only available for

systems as depicted in diagram SMK/017CQC (for each internal

unit, it is possible to toggle between the external unit of the kit and

the main external unit).

• External unit (Porter) with switching (secondary): default

function to be used also in systems with switching device Art.

1404 (for installations with 3 or more entrances)

• Secondary external unit (Porter): function to be used in

systems with switching device Art. 1405 and 2 external units

• Main external unit (Porter): function to be used in systems

with switching device Art. 1405 and 2 external units

OPERATION WITH SWITCHING DEVICE ART. 1405

With the switching device Art. 1405 it is possible to install only

1 main external unit and 1 secondary external unit.

In “Main external unit” mode, lock release (or actuator)

commands are only executed if the external unit is in call or self-

ignition mode. The "door-open" function is always deactivated.

In “Secondary external unit” mode, lock release (or actuator)

commands are executed if the system is in standby mode or if the

external unit is active.

If the system is in standby mode the rst self-ignition command

will activate the camera of the secondary external unit. Further

commands will toggle between the external units, activating

alternately the main external unit and the secondary external unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Comelit 8461S in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Comelit 8461S Manual

Product: