784374
519
Zoom out
Zoom in
Previous page
1/737
Next page
519
BEL NUMMER
_ _ _ 100
BELLEN CANC
of:
1. Blader door de namenlijst met .
2. Druk op om de oproep te doen of om te sluiten.
2.6. TOEGANGSCONTROLE
De drukknop kan op twee manieren functioneren:
“toegangscontrole” uitgeschakeld: in deze modus kan
voor elke naam in de namenlijst een oproepcode worden
opgeslagen die aan de naam gekoppeld wordt. De
ingangspaswoorden moeten apart worden ingevoerd, en
zijn aan geen enkele naam gekoppeld.
“toegangscontrole” ingeschakeld: in deze modus
kan voor elke naam in de namenlijst een oproepcode,
een aangepaste code (alleen voor oproepen van het
aangepaste type), een paswoord en een RFID-sleutel
worden opgeslagen. Dankzij de mogelijkheid een naam
aan een paswoord of sleutel te koppelen, worden de
toegangen geïdentificeerd.
Wanneer de toegangscontrole ingeschakeld
is, kunnen de volgende opties niet worden
gebruikt:
- de Immotec oproepmodus
- het laden van gegevens van 1249B (IR 003 -
SW rev. 2.3 of hoger).
Om over te gaan van een uitgeschakelde
“toegangscontrole” naar een ingeschakelde
“toegangscontrole” moeten alle opgeslagen
paswoorden worden verwijderd.
Om over te gaan van een ingeschakelde
“toegangscontrole” naar een uitgeschakelde
“toegangscontrole” moeten alle opgeslagen
paswoorden en de sleutels worden verwijderd.
1. Ga naar de programmeringsfase, zie ”GA NAAR HET
PROGRAMMERINGSMENU”.
2. Kies instellingen/toegangscontrole
TAAL KIEZEN
TWEEDE TAAL
OPROEPBEHEER
TOEGANGSCONTROLE
OK OK
SCROLL ESC
3. Kies:
JA
NEE (default)
4. Bevestigen
2.7. ALLEEN NAAM
Hiermee kan alleen de naam, zonder gebruikerscode, worden
weergegeven tijdens het bladeren door de namenlijst en de
oproep van een gebruiker.
Deze functie is standaard niet actief.
1. Ga naar de programmeringsfase, zie ”GA NAAR HET
PROGRAMMERINGSMENU”.
2. Kies instelingen/alleen namen
SECONDA LINGUA
GEST. CHIAMATA
CONTROLLO ACCESSI
SOLO NOME
OK OK
SCORRI ESCI
3. Kies:
JA
NEE (default)
4. Bevestigen.
2.8. WELKOMSTBERICHT
Met deze functie (standaard niet actief) kan een
welkomstbericht (maximaal 40 tekens op 4 regels in
hoofdletters) worden ingevoerd.
Het welkomsbericht wordt om de 4 seconden afgewisseld
met de normale informatieschermen.
NB: het bericht kan niet worden omgezet in
de tweede taal wanneer de functie “TWEEDE
TAAL” actief is (zie par. “2.4. TWEEDE TAAL).
2.8.1 WIJZIGEN
Het welkomstbericht kan worden ingevoerd door middel van
de software art. 1249B.
1. Ga naar de programmeringsfase, zie ”GA NAAR HET
PROGRAMMERINGSMENU”.
2. Kies de menu-opties: instellingen/welkomstbericht/
wijzigen
WELKOM
SCROLL OK
ESC CANC
3. Voer het welkomstbericht in
of:
Wis het bestaande bericht en voer een nieuw bericht in.
4. Bevestig dit.
Algemene inhoudsopgave
519


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comelit 1229A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comelit 1229A in the language / languages: Dutch as an attachment in your email.

The manual is 166.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info