Manual CombiSteel 7455.1662 (page 12 of 53) (English, German, Dutch, French)

778179

Zoom out

Zoom in

1/53

www.combisteel.com

8. End of Cook Cycle Mode

1) After the time has expired in a Manual Cook Mode, or a Pre-set Program Cook Mode, the oven shall go into

The End of Cook Cycle Mode.

2) During this mode, "END" displays.

3) If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until the user

acknowledges this by either opening and closing the door or pressing the " " pad. If User Option OP:10 is

selected, after the 3 second beep, the oven shall go into Idle Mode.

9. Pre-set Program Cook Mode

1) This mode allows cooking of food items through a one pad touch operation. While in Ready Mode, pressing

one of ten digit keys on the keyboard will cause the oven to run the Pre-set Program associated with that key.

2) During this mode, displays the remaining cooking time. If it is multi-stage cooking, the total remaining cooking

time displays not a particular stage cooking time.

3) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this

mode, the oven will enter Pause Mode.

10. On the Fly Cooking

1) While the oven is cooking, if User Option OP:51 is selected, press number buttons, the pre-set cooking

program will start automatically.

2) The screen displays the remaining cooking time.

3) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this

mode, the oven will enter Pause Mode.

11. Programming Mode

This mode allows the user to assign cook times and power levels to the once touched button.

1) Open the door and press "1" pad for 5 seconds, the buzzer will sound once and enter to Programming Mode.

2) "ProG" displays. You can press number keys to input the time you need.

3) Press “Hold 0%”,"Defrost 20%","Medium 50%" or "Med-Hi 70%" to input the power level. The screen will

display the related power. If the same button pressed twice, the power will change to PL10. If no power chosen,

"PL 0" is default. NOTE: Set the time first, then choose the power.

4) To change the cooking factors: If press “X2”, the screen will display “CF:XX”. The default factor is 80%. "CF:80"

displays. If you need to change the cooking , just press one the number buttons to set.

5) After setting the time and power, press " ", the cooking program will be saved. When the program saved,

"ProG" displays.

6) If all the cooking time exceeds the MAX. time User Option 7, when press " " to save the program, the buzzer

will sound three times briefly to tell you the time is no use. And then turns back to display "ProG". The time set

before will be no change.

7) Close the door, the oven will turn back to Ready Mode. If press " " button during setting process, the oven

turn to Door Open Mode. The program that not saved will be lost. If there is program saved as memory procedure,

press the related number button, the saved program will start. If no saved program, the buzzer will alarm when

pressing number button and it will not work. For example: set the program as memory cooking. Power level PL7

and cooking time is 1 minute and 25 seconds.

Step 1: In ready mode, press number button "1" for 5 seconds, "ProG" displays.

Step 2: Press number button "3", the screen will display "P:03", after two seconds, the screen will display the

related time “ :30”.

Step 3: Press number buttons "1", "2" and "5" to input the cooking time.

Step 4: Press "Med-Hi/70%" button,"PL7" displays. Setting finished.

Step 5: Press " " to save. When use the program next time, just press "3", the related program will start.

Note:

1. If the electricity is cut off, the saved program will not be lost.

2. If the program needs to reset , just repeat the above steps.

3. If press " " at the last step, it will turn back to Ready Mode. The setting will be no use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of CombiSteel 7455.1662 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

CombiSteel 7455.1662 Manual

Product: