778378

CombiSteel 7455.1660 Manual

13
Zoom out
Zoom in
Previous page
1/61
Next page
13
www.combisteel.com
13. Stage Cooking Programming
This allows the user to cook food items at manual cook mode and programming mode.
1) Three stages can be set at most under cooking mode or programming mode. After setting the power and time
for the first stage, press " Time Entry " to set the second stage. And the same step to set the third stage.
2) When setting the second, third stage, press " Time Entry", "STAGE 2","STAGE 3" displays.
3) Press " " button to start cooking.
Example: In programming mode, press number buttons "3" to set two stages cooking. The first stage is PL 7 and
time is 1 minute 25 seconds. The second stage is PL5 and 5 minutes and 40 seconds. The steps are as follows:
a. Open the door, press number button "1" for 5 seconds, "PROGRAM" displays.
b. Press number button "3", the screen will display "P:03", after two seconds, the screen will display the related
time " :30".
c. Press "1","2","5" to input the cooking time. "1:25" displays.
d. Press "Med-Hi 70%", "1:25 70” displays. The first stage is finished.
e. Press " Time Entry", "STAGE 2" displays.
f. Press "5", "4","0" button, "5:40" displays.
g. Press "Medium 50%", "5:40 50 " displays. The second stage is finished.
h. Press " " button to start cooking.
i. The total time counts down.
14. Use Option Mode
This allows the user choose between various ways for the oven to operate.
1) Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enters this mode.
2) The screen displays "OP: - -".
3) Press any number button to enter related mode setting. For example: to set the voice of the buzzer to medium.
Press " 2 ", "OP:22" displays. If you want to change, keep pressing "2", displays "OP:20", "OP:21","OP:22",
"OP:23", "OP:20" .....in cycle.
4) Press " " to save the current setting. After saved, "OP: - -" display again.
5) During setting process, press " " to enter Door Open Mode. Close the door will enter Ready Mode.
6) If " " button not pressed at the last step, the program cannot be saved but stay at previous way.
15. Service Mode
1) Open the oven door and press "3" pad for 5 seconds to enter service mode.
2) The screen displays "SERVICE".
3) To check the times of closing or opening the door, just press number button "3", the screen will display the
times.
4) Press " 1 " pad for Tube Hours.
Press " 2 " pad for Tube Cycles.
Press " 3 " pad for Door Cycles..
Press " 4 " pad to Clear service information.
Only for some models:
Press " 5 " pad to run Top Mag. Oven displays amps.
Press " 6 " pad to run Bottom Mag. Oven displays amps.
5) Press " " to enter Door Open Mode. Close the door will enter Ready Mode.
16. Factory-default setting
In the Ready Mode, pressing " " and " 0 " to factory-default setting.
1) Press " " and " 0 ", the buzzer sounds once, and the screen will display "CHECK". If it is factory-default
setting, will display 11 ,after three seconds, the oven turn to the ready mode Press" ". to cancel the display
and back to ready back in the process of display. If not in the factory-default setting, the screen will display "00",
press " " to the factory-default setting, the screen will display "11" or"00".
2) Do not press " " when the display " 00 ",the setting will cancel.
Note: Be careful in the operation as it will restore all configure to factory-default setting.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for CombiSteel 7455.1660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of CombiSteel 7455.1660 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info