Manual CombiSteel 7227.0010 (page 8 of 88) (English, German, Dutch, French)

778172

Zoom out

Zoom in

1/88

www.combisteel.com

Mount heights & clearance

IMPORTANT:

• A minimum of 8” round (standard for this

range hood) or 3-1/4 x 10” rectangular duct

(purchased separately) must be used to

maintain maximum airflow efficiency.

• Always use rigid type metal/aluminum

ducts if available to maximize airflow when

connecting to provided duct.

• Please use Duct Run Calculation below to

compute total available duct run when

using elbows, transitions and caps.

• ALWAYS, when possible, reduce the

number or transitions and turns. If long

duct run is required, increase duct size from

8” to 10”. If a reducer is used, install a long

reducer instead of a pancake reducer.

Reducing duct size will restrict airflow and

decrease airflow, thus reduce duct size as

far away from opening as possible.

• If turns or transitions are required: Install as

far away from opening and as far apart,

between 2, as possible.

• Minimum mount height between stove top

to hood bottom should be no less than 27-

inch*.

• Maximum mount height between stove top

to hood bottom should be no higher than

30-inch*.

• It is important to install the hood at the

proper mounting height. Hoods mounted

too low could result in heat damage and

fire hazard; while hoods mounted too high

will be hard to reach and will lose its

performance and efficiency.

• If available, also refer to stove top

manufacturer’s height clearance

requirements and recommended hood

mounting height above range.

* Due to different ceiling height configurations,

recommended height may not be applicable.

Minimum Duct Size:

• Round - 8” minimum

• Rectangular - 3-1/4 x 10” minimum

(requires a 8” to 3-1/4x10” adaptor, not

supplied)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of CombiSteel 7227.0010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

CombiSteel 7227.0010 Manual

Product: