778171

CombiSteel 7227.0005 Manual

14
Zoom out
Zoom in
Previous page
1/88
Next page
14
www.combisteel.com
Range hood operations
Control Panel Layout and Buttons Configurations:
In addition to the remote control feature, this range hood is also equipped with a heat sensor that will self-
calibrate in 5 seconds when the range hood is first electrically activated and beeps when self-calibration is done.
To conserve energy, the LCD panel will turn off automatically after 5 seconds of inactivity.
Adjusting Heat Sensitive Auto Speed (HSAS) Function:
• Press Auto Function button to Turn On/Off the Auto Mode. The Auto Function Icon will appear in the
LCD Panel when Auto Mode is On.
• While the range hood is off, press and hold Auto Function button to enter the temperature setting mode.
Press Increase or Decrease button to adjust the comparison temperature value between the internal
and external heat sensors from 7°F to 20°F. The temperature setting mode will exit automatically after
5 seconds of inactivity.
• While the range hood is off and Auto Function is activated, the blower will turn on to its highest speed
automatically when the internal temperature is 4 times above the external temperature. Then it will
adjust the speed level (between speed levels F4 to F1) automatically according to the detected
temperature between the sensors (4 times to 1 time). The speed level can also be manually overwritten
by press the Increase or Decrease button and Auto Function will reactivate after 2 minutes. The blower
can ONLY be turned off MANUALLY or activate the delay off timer function.
Activating Normal Blower Function:
• While the range hood is off, press Increase or Decrease button to start the blower. Press Increase button
to increase blower speed (F1 to F4) as indicated in LCD panel. The Increase button cycles blower settings
from off (00), quiet speed (F1), low speed (F2), medium speed (F3) to high speed (F4).
• While the range hood is on and the blower is running, press Decrease button to decrease blower speed
(F4 to F1) as indicated in LCD panel. The Decrease button cycle blower settings from high speed (F4), to
medium speed (F3), low speed (F2), quiet speed (F1) to off (00).
Activating Light Function:
• Press Light button once to turn on the lights, and once again to turn off the lights.
CAUTION: DO NOT touch the lights until switched OFF and cooled.
Activating Power-Off Delay Function:
• While the range hood is on and the blower is running, press Power-Off Delay button to activate delay
off timer and “Power-Off Delay” icon will appear in LCD panel. Adjust to desired period of delay off timer
by pressing Increase or Decrease button (minimum 1 minute to maximum 15 minutes). Timer begins to
countdown immediately, when it reaches 0, the blower will shut off.
Adjusting Clock Function:
• While the range hood is off, press Power-off Delay button once to enter the clock setting mode, press
Increase or Decrease button to set the Hour. Press the Power-off Delay button again to set the Min.
Press the Power-off Delay button again to exit the clock setting mode.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for CombiSteel 7227.0005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of CombiSteel 7227.0005 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info