778174
8
Zoom out
Zoom in
Previous page
1/34
Next page
8
www.combisteel.com
5.4 The speed adjusting
Set the speed button to “Oposition (Drawing 3-1), connect the electronic power, indicator light will be on. Start
the machine by turning the button in a clockwise direction to adjust the speed according to property of mixing
thing and the mixing agitator. The speed will increase while the button from left to right.
When the arrow is standing on top (drawing 3-2), the mixer is low speed, this is good for dough.
When the arrow is standing in the middle has (drawing 3-3), the mixer is at middle speed, this is good for meat
dumpling stuffing.
When the arrow is standing right (drawing 3-4), the mixer is at high speed, this is good for eggs.
This mixer has variable speeding, so you can choose best speed for your job.
Rotary direction: (from shaft out): The rotary direction of main shaft cover (item 44) is clockwise (red arrow) and
rotary direction of mix shaft (item 11) is anti-clockwise.
Note: Don’t go against the rotation direction as written above. Otherwise the working efficiency will be reduced.
Or the mixer will break. Don’t use the machine over 10 minutes each time. The max. flour weight to mix doesnt
be over 500 gr.
5.5 How to adjust the height of the mixing agitator.
Sometimes the interval between bottom of mixing agitator to bowl is too close and sometimes it is too big,
adjusting the height of mixing agitator is necessary. Detail is bellowing (drawing 4).
a. Shut off the power.
b. Use a wrench to release the nut of the mixing agitator.
c. Adjust the interval.
d. Tighten up the nut.
5.6 When the job is finished, please return the speed button back to “Oposition, then turn off the machine,
shut off the power.
6 Safety caution
6.1 Remove the machine, after shutting of the power. When disassemble the mixing agitator, the mixing bowl
machine must be turn off.
6.2 Don’t use wet fingers on operating the machine.
6.3 Don’t wet the unit or immerse the mixer in water.
6.4 If any parts are broken or it does not work the way it shoot be, stop the machine, waiting to fix it by
technician.
6.5 Don’t put any fingers in the bowl while it is working.
6.6 Under age persons please keep away from the machine.
6.7 When the machine is working or the head is raising, the handle “emust be at vertical position.
6.8 When the head is raising, don’t put any fingers or link parts between head and stand of machine for injury.
6.9 There is a ground point (Mark …….) at the back please keep this in original position after each maintenance.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for CombiSteel 7013.0130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of CombiSteel 7013.0130 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info