521985
9
Zoom out
Zoom in
Previous page
1/24
Next page
CSB200 Class B AIS
R2.0 17
When an un-configured AIS transponder is connected for the first time
the display will be similar to that shown below:
To configure the transponder all of the data fields must be completed and
saved to the AIS.
L
CAUTION:
For security reasons the MMSI of the vessel cannot be
changed once programmed. Do not programme the MMSI
unless you are certain you have the correct information.
Please check the number entered carefully. If the MMSI
programmed is incorrect the AIS transponder will need to
be returned to the supplier for factory reset.
Enter the vessels information in the appropriate box:
Ship's name - enter the name of the vessel (20 characters
maximum)
Call Sign - enter the vessel's radio call sign (7 characters
maximum)
CSB200 Class B AIS
R2.0 18
MMSI number - enter the vessel's Maritime Mobile Service
Identity number
Enter the vessels dimensions as follows
o
Dimension A - distance from the bow to GPS antenna
location to the nearest meter
o
Dimension B - distance from the stern to GPS antenna
location to the nearest meter
o
Dimension C - distance from the port side to the GPS
antenna location to the nearest meter
o
Dimension D - distance from the GPS antenna to the
starboard side to the nearest meter
Select the most appropriate vessel type from the drop down
menu.
L
CAUTION:
If no MMSI is entered (MMSI is set to 000000000) then the
AIS transponder will operate in receive only mode. The
vessels own position will not be transmitted. An MMSI must
be entered to allow the AIS transponder to transmit its own
position to other vessels.
When you have entered all of the vessel's data click the 'Save
static data to AIS' button to programme this configuration into
the AIS transponder:
A warning will be displayed asking you to verify the MMSI
number. Please check the number displayed is correct before
proceeding. If the number is incorrect click the 'No' button to
cancel programming of the MMSI:
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comar CSB200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comar CSB200 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info