521990
4
Zoom out
Zoom in
Previous page
1/6
Next page
7
Verify that the green power LED on the antenna splitter is
illuminated.
Transmit using the VHF radiotelephone and verify that the red LED
on the antenna splitter marked ‘VHF’ is illuminated during the
transmission.
Wait for the AIS Transponder to transmit its first position report.
This is indicated by the red LED TX on the AIS Transponder
illuminating. During AIS Transponder transmissions the red ‘AIS’
LED on the antenna splitter will flash briefly. Class B AIS
transmissions occur once every 3 minutes if your vessel is
stationary.
3. Operation
Operation of the antenna splitter is automatic and requires no user
intervention.
During operation the antenna splitter will share signals received at
your VHF antenna with both the VHF Radiotelephone and the AIS
Transponder.
When either connected device transmits, the antenna splitter will
automatically route the transmission to the antenna.
VHF Radiotelephone transmissions (including DSC transmissions)
are given priority over AIS transmissions.
It is not possible for both connected devices to transmit
simultaneously using a single VHF antenna. Whilst you are
talking on your VHF Radiotelephone no AIS position reports
will be transmitted.
L
8
4. Troubleshooting
Problem Solutions
Power LED not illuminated.
Check power supply
connections and fuse or
circuit breaker.
Check polarity of power
supply connections.
Check power supply
voltage.
‘VHF’ LED does not illuminate when
VHF Radiotelephone is transmitting.
Check the antenna output of the
VHF radiotelephone is connected to
the antenna splitter input labelled
‘VHF’.
‘AIS’ LED does not illuminate when
AIS Transponder is transmitting.
Check the antenna output of the AIS
transponder is connected to the
antenna splitter input labelled ‘AIS’.
Clicks or pops are heard from a
connected FM broadcast receiver.
This is normal and may occur during
VHF or AIS transmission.
VHF or AIS reception range is
reduced.
A very slight reduction in receiver
range is normal and due to the
insertion loss of the antenna splitter.
www.busse-yachtshop.de | info@busse-yachtshop.de
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comar AST-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comar AST-200 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info